Origin 350

A place to post hardware inventories.
Forum rules
Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.
User avatar
miod
Posts: 522
Joined: Fri Oct 09, 2009 2:44 am
Location: Clermont-Ferrand (France)
Contact:

Origin 350

Unread postby miod » Mon Nov 24, 2014 1:17 pm

I got my hands on an Origin 350 today. The real thing, not an Altix 350 with Onyx4 skins this time...

The original configuration was 2x600MHz. The machine had not been used in the last 6.5 years until I asked for an hinv to confirm the configuration:

Code: Select all

001c01-L1>log
04/17/08 11:40:39 L1 booting 1.38.4
04/17/08 11:40:39 ChiServ IP53
04/17/08 11:40:39 Checking for Type
04/17/08 11:40:39  -- ChiServ Type set
04/17/08 11:40:41 USB0: waiting on open
04/17/08 11:40:41 auto power up countdown initiated
04/17/08 11:42:06 auto power up initiated
04/17/08 11:42:06 power up (COMMAND)
04/17/08 11:42:11 PIC cfg: 0x04
04/17/08 11:42:11 Node 0 XTalk clock 88
04/17/08 11:42:12 reset again MIPS
04/17/08 11:42:17 PIC cfg: 0x04
04/17/08 11:42:17 Node 0 XTalk clock 88
04/18/08 07:37:53 power down (PANEL)
11/18/14 06:10:41 L1 booting 1.38.4
11/18/14 06:10:41 ChiServ IP53
11/18/14 06:10:41 Checking for Type
11/18/14 06:10:41  -- ChiServ Type set
11/18/14 06:10:43 USB0: waiting on open
11/18/14 06:10:43 auto power up countdown initiated
11/18/14 06:12:08 auto power up initiated
11/18/14 06:12:08 power up (COMMAND)
11/18/14 06:12:12 PIC cfg: 0x04
11/18/14 06:12:13 Node 0 XTalk clock 88
11/18/14 06:12:14 reset again MIPS
11/18/14 06:12:18 PIC cfg: 0x04
11/18/14 06:12:19 Node 0 XTalk clock 88
11/18/14 06:57:42 power down (PANEL)
11/24/14 03:09:56 L1 booting 1.38.4
11/24/14 03:09:56 ChiServ IP53
11/24/14 03:09:56 Checking for Type
11/24/14 03:09:56  -- ChiServ Type set
11/24/14 03:09:58 USB0: waiting on open
11/24/14 03:09:58 auto power up countdown initiated
11/24/14 03:10:03 power up (PANEL)
11/24/14 03:10:08 PIC cfg: 0x04
11/24/14 03:10:08 Node 0 XTalk clock 88
11/24/14 03:10:09 reset again MIPS
11/24/14 03:10:14 PIC cfg: 0x04
11/24/14 03:10:14 Node 0 XTalk clock 88
11/24/14 03:11:47 power down (PANEL)


And was thus fitted this way (the two 18GB disks had been removed for zeroing already):

Code: Select all

>> hinv -v
IP35 Node Board, Module 001c01
    ASIC BEDROCK Rev 2, 200 MHz, (nasid 0)
    Processor A: 600 MHz R16000 Rev 2.1
          Secondary Cache 4MB 300MHz Tap 0xc , (cpu 0)
      R16010FPC Rev 2.1
    Processor C: 600 MHz R16000 Rev 2.1
          Secondary Cache 4MB 300MHz Tap 0xc , (cpu 1)
      R16010FPC Rev 2.1
    Memory on board, 2048 MBytes (Standard)
      Bank 0, 512 MBytes (Premium)  <-- (Software Bank 0)
      Bank 1, 512 MBytes (Premium)
      Bank 4, 512 MBytes (Premium)
      Bank 5, 512 MBytes (Premium)
IXBRICK Bridge, Module 001c01
    ASIC BRIDGE Rev 3, (widget 15)
    adapter IOC4 Rev 53
          (pci id 1)
    adapter IOC4-ATA Rev 53
          (pci id 1)
        peripheral CDROM, BUS 0, ID 0, MATSHITA DVD-ROM SR-8177
    adapter PCI (SCSI interface) Rev 5
          (pci id 2)
    adapter PCI (SCSI interface) Rev 6
          (pci id 3)
    adapter GigE Rev 15
          (pci id 4)
IXBRICK Bridge, Module 001c01
    ASIC BRIDGE Rev 3, (widget 15)
ASIC XBOW Rev 3, on CBrick, Module 001c01


So I replaced the PIMM with a 4x700MHz PIMM I got from dhjj:

Code: Select all

>> hinv -v
IP35 Node Board, Module 001c01
    ASIC BEDROCK Rev 2, 200 MHz, (nasid 0)
    Processor A: 700 MHz R16000 Rev 2.1
          Secondary Cache 8MB 350MHz Tap 0xa , (cpu 0)
      R16010FPC Rev 2.1
    Processor B: 700 MHz R16000 Rev 2.1
          Secondary Cache 8MB 350MHz Tap 0xa , (cpu 1)
      R16010FPC Rev 2.1
    Processor C: 700 MHz R16000 Rev 2.1
          Secondary Cache 8MB 350MHz Tap 0xa , (cpu 2)
      R16010FPC Rev 2.1
    Processor D: 700 MHz R16000 Rev 2.1
          Secondary Cache 8MB 350MHz Tap 0xa , (cpu 3)
      R16010FPC Rev 2.1
    Memory on board, 2048 MBytes (Standard)
      Bank 0, 512 MBytes (Premium)  <-- (Software Bank 0)
      Bank 1, 512 MBytes (Premium)
      Bank 4, 512 MBytes (Premium)
      Bank 5, 512 MBytes (Premium)
IXBRICK Bridge, Module 001c01
    ASIC BRIDGE Rev 3, (widget 15)
    adapter IOC4 Rev 53
          (pci id 1)
    adapter IOC4-ATA Rev 53
          (pci id 1)
        peripheral CDROM, BUS 0, ID 0, MATSHITA DVD-ROM SR-8177
    adapter PCI (SCSI interface) Rev 5
          (pci id 2)
    adapter PCI (SCSI interface) Rev 6
          (pci id 3)
    adapter GigE Rev 15
          (pci id 4)
IXBRICK Bridge, Module 001c01
    ASIC BRIDGE Rev 3, (widget 15)
ASIC XBOW Rev 3, on CBrick, Module 001c01

... and I am a happy Origin 350 owner now!
:Indigo:R3000 (alas, dead) :Indigo:R4000 x4 :Indigo2:R4400 :Indigo2IMP:R4400 x2 :Indigo2:R8000 :Indigo2IMP:R10000 :Indy:R4000PC :Indy:R4000SC :Indy:R4400SC :Indy:R4600 :Indy:R5000SC :O2:R5000 x3 :O2:RM7000 :Octane:2xR10000 :Octane:R12000 :O200:2xR12000 :O200: - :O200:2x2xR10000 :Fuel:R16000 :O3x0:4xR16000 :A350:
among more than 150 machines : Apollo, Data General, Digital, HP, IBM, MIPS before SGI, Motorola, NeXT, SGI, Solbourne, Sun...

User avatar
vishnu
Donor
Donor
Posts: 3189
Joined: Sun Mar 18, 2007 3:25 pm
Location: Minneapolis, Minnesota USA

Re: Origin 350

Unread postby vishnu » Mon Dec 01, 2014 11:11 am

Wow nice! :mrgreen: Whatcha gon' do with it? :?: Um, are you going to give it to me? :lol:
Project:
Temporarily lost at sea...
Plan:
World domination! Or something...

:Tezro: :Octane2:

User avatar
ClassicHasClass
Donor
Donor
Posts: 2108
Joined: Wed Jul 25, 2012 7:12 pm
Location: Sunny So Cal
Contact:

Re: Origin 350

Unread postby ClassicHasClass » Mon Dec 01, 2014 3:26 pm

He's going to port BSD to it, of course.
smit happens.

:Fuel: bigred, 900MHz R16K, 4GB RAM, V12 DCD, 6.5.30
:Indy: indy, 150MHz R4400SC, 256MB RAM, XL24, 6.5.10
:Indigo2IMP: purplehaze, 175MHz R10000, Solid IMPACT
probably posted from Image bruce, Quad 2.5GHz PowerPC 970MP, 16GB RAM, Mac OS X 10.4.11
plus IBM POWER6 p520 * Apple Network Server 500 * RDI PrecisionBook * BeBox * Solbourne S3000 * Commodore 128 * many more...

User avatar
miod
Posts: 522
Joined: Fri Oct 09, 2009 2:44 am
Location: Clermont-Ferrand (France)
Contact:

Re: Origin 350

Unread postby miod » Mon Dec 01, 2014 11:45 pm

vishnu wrote:Um, are you going to give it to me? :lol:

Don't you already have a Tezro? :mrgreen:
:Indigo:R3000 (alas, dead) :Indigo:R4000 x4 :Indigo2:R4400 :Indigo2IMP:R4400 x2 :Indigo2:R8000 :Indigo2IMP:R10000 :Indy:R4000PC :Indy:R4000SC :Indy:R4400SC :Indy:R4600 :Indy:R5000SC :O2:R5000 x3 :O2:RM7000 :Octane:2xR10000 :Octane:R12000 :O200:2xR12000 :O200: - :O200:2x2xR10000 :Fuel:R16000 :O3x0:4xR16000 :A350:
among more than 150 machines : Apollo, Data General, Digital, HP, IBM, MIPS before SGI, Motorola, NeXT, SGI, Solbourne, Sun...

User avatar
miod
Posts: 522
Joined: Fri Oct 09, 2009 2:44 am
Location: Clermont-Ferrand (France)
Contact:

Re: Origin 350

Unread postby miod » Mon Dec 01, 2014 11:47 pm

ClassicHasClass wrote:He's going to port BSD to it, of course.

Nah, I already did about 5 years ago. But I can tackle a few unfinished projects now (IP35 SMP...)
:Indigo:R3000 (alas, dead) :Indigo:R4000 x4 :Indigo2:R4400 :Indigo2IMP:R4400 x2 :Indigo2:R8000 :Indigo2IMP:R10000 :Indy:R4000PC :Indy:R4000SC :Indy:R4400SC :Indy:R4600 :Indy:R5000SC :O2:R5000 x3 :O2:RM7000 :Octane:2xR10000 :Octane:R12000 :O200:2xR12000 :O200: - :O200:2x2xR10000 :Fuel:R16000 :O3x0:4xR16000 :A350:
among more than 150 machines : Apollo, Data General, Digital, HP, IBM, MIPS before SGI, Motorola, NeXT, SGI, Solbourne, Sun...


Return to “SGI: hinv”

Who is online

Users browsing this forum: No registered users and 1 guest