Octane 2 dual R14k, 4.3gb ram, GigE, ESI+TRAM

A place to post hardware inventories.
Forum rules
Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.
User avatar
uridium
Posts: 122
Joined: Fri Jul 08, 2005 3:05 am
Location: Australia
Contact:

Octane 2 dual R14k, 4.3gb ram, GigE, ESI+TRAM

Unread postby uridium » Tue Aug 26, 2014 4:19 am

My Octane 2 used for dev work, desktop and generally daily-driver UNIX system.

It's a delight to drive an Octane series system after nearly 8 years and moving east. Today I managed to get an video card working in it. THe v8pro I purchased off fleabay is DOA sadly and I didn't have the ability to test it 2 years ago when I was acquiring parts. I've learnt. I've been using an O2 180Mhz since '07 when I moved to Sydney and doing >95% of my fiddling and coding on it. It's just too slow when I'm building larger things and memory is low. So, here is my workhorse to augment the O2.

Thanks veganman for the prodding and advice to get this thing up and running to it's current state again :D

Code: Select all

hound 1# uname -aR;hinv -vm
IRIX64 hound 6.5 6.5.30f 07202013 IP30
Location: /hw/node
      PM20600MHZ Board: barcode MXK598     part 030-1778-001 rev  C
Location: /hw/node/xtalk/15
            IP30 Board: barcode LLP714     part 030-1467-001 rev  D
Location: /hw/node/xtalk/15/pci/2
    PWR.SPPLY.S2 Board: barcode AAC7450960 part 060-0038-001 rev  C
             FP1 Board: barcode KVH259     part 030-0891-003 rev  G
Location: /hw/node/xtalk/13
        XTALKPCI Board: barcode KXB369     part 030-0952-005 rev  E
Location: /hw/node/xtalk/11
           MOT10 Board: barcode HRE724     part 030-1241-002 rev  G
2 600 MHZ IP30 Processors
Heart ASIC: Revision F
CPU: MIPS R14000 Processor Chip Revision: 2.4
FPU: MIPS R14010 Floating Point Chip Revision: 0.0
Main memory size: 4352 Mbytes
Xbow ASIC: Revision 1.4
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
  CDROM: unit 6 on SCSI controller 1
Integral SCSI controller 2: Version Fibre Channel QL2200A, 33 MHz PCI
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: ESI with texture option
Integral Fast Ethernet: ef0, version 1, pci 2
Gigabit Ethernet: eg0, PCI slot 2, firmware version 12.4.10
Iris Audio Processor: version RAD revision 12.0, number 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3
  PCI Adapter ID (vendor 0x1077, device 0x2200) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0009) PCI slot 2
hound 2#


History of the system:

I pushed the chassis and skins through Sydney streets on a hand-trolley with Freespace (Steve) as he needed a PSU for his Octane(1) and we had no idea where in Redfern we were going. It was just a PSU and a chassis and xbow. He stashed the case here at my place for a number of years and I stared at it longingly. After 4-5 years I asked him if he was still interested in it, and if he'd consider selling it. He was apologetic and had forgotten about it and offered it to me for free (Awww.. :~) .. so after a health scare for $aging_parent, I headed back to Perth and started cleaning out my room of crimes. I broke down my old Octane(1) with v1.3 xbow and sent the ram and video cards to Sydney. So I then assembled bits, fleabayed some CPU's and a defective v8pro (grr!), and here are. Foolishly I took the ESI's off the mounting boards and left them. Not bright. I then cut and shaped some metal to hold things 'just so' (tm) and here we are. The v8pro's holes don't line up and the one I purchased had no hook clips. Hook clips I took off when I left the old carrier boards which is back in Perth. (..not my brightest hour).

Recently I stumbled across the GigE card on fleabay for cheap. It's nice. :) This'll be very pleasurable compiling C/C++, Fortran, Ada and running LiSP code compared to the puddly O2. :)
Al Boyanich
adb -w -P "world> " -k /dev/meta/galaxy/ksyms /dev/god/brain

User avatar
ClassicHasClass
Donor
Donor
Posts: 2072
Joined: Wed Jul 25, 2012 7:12 pm
Location: Sunny So Cal
Contact:

Re: Octane 2 dual R14k, 4.3gb ram, GigE, ESI+TRAM

Unread postby ClassicHasClass » Tue Aug 26, 2014 7:41 am

Sexy!
smit happens.

:Fuel: bigred, 900MHz R16K, 4GB RAM, V12 DCD, 6.5.30
:Indy: indy, 150MHz R4400SC, 256MB RAM, XL24, 6.5.10
:Indigo2IMP: purplehaze, 175MHz R10000, Solid IMPACT
probably posted from Image bruce, Quad 2.5GHz PowerPC 970MP, 16GB RAM, Mac OS X 10.4.11
plus IBM POWER6 p520 * Apple Network Server 500 * RDI PrecisionBook * BeBox * Solbourne S3000 * Commodore 128 * many more...

User avatar
Raion-Fox
Donor
Donor
Posts: 1331
Joined: Thu Jan 30, 2014 5:01 pm
Location: near King George, Virginia
Contact:

Re: Octane 2 dual R14k, 4.3gb ram, GigE, ESI+TRAM

Unread postby Raion-Fox » Tue Aug 26, 2014 8:16 am

I've a working V6 for sale in the FS forums if you're interested.
:O3x02L: R16000 700MHz 8GB RAM kanna
:Octane: R12000 300MHz SI 896MB RAM yuuka
:Octane2: R12000A 400MHz V6 2.5GB RAM
:Indy: (Acclaim) R4600 133MHz XL Graphics 32MB RAM
:Indy: (Challenge S) R4600 133MHz (MIPS III Build Server)
Thinkpad W530 i7 3940XM 3GHz, 32GB, K1000M Windows 8.1 Embedded rin
Thinkpad R40 Pentium M 1.5GHz 2GB RAM kasha

User avatar
uridium
Posts: 122
Joined: Fri Jul 08, 2005 3:05 am
Location: Australia
Contact:

Re: Octane 2 dual R14k, 4.3gb ram, GigE, ESI+TRAM

Unread postby uridium » Thu Feb 26, 2015 11:20 pm

Maybe.. I'm in Perth atm.. system is back home in Sydney. Will be back in a month or two.
Al Boyanich
adb -w -P "world> " -k /dev/meta/galaxy/ksyms /dev/god/brain


Return to “SGI: hinv”

Who is online

Users browsing this forum: No registered users and 1 guest