Octane 2xR10k 400MHz, 2048MB, V12+DM2+VOB

A place to post hardware inventories.
Forum rules
Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.
User avatar
fockion
Posts: 38
Joined: Tue Jun 01, 2010 2:42 am
Location: Athens, Greece

Octane 2xR10k 400MHz, 2048MB, V12+DM2+VOB

Unread postby fockion » Fri Jan 04, 2013 2:34 am

Hi,

The newest addition to my collection

Code: Select all

hinv -vm
Location: /hw/node
            PM20 Board: barcode KYA016     part 030-1476-002 rev  B
Location: /hw/node/xtalk/15
            IP30 Board: barcode LKD614     part 030-1467-001 rev  D
Location: /hw/node/xtalk/15/pci/2
             FP1 Board: barcode KBE183     part 030-0891-003 rev  G
    PWR.SPPLY.ER Board: barcode AAE0150158 part 060-0035-002 rev  A
Location: /hw/node/xtalk/13
        XTALKPCI Board: barcode MEJ121     part 030-0952-005 rev  E
Location: /hw/node/xtalk/11
  ODY128VERSIONB Board: barcode KWG943     part 030-1611-001 rev  C
Location: /hw/node/xtalk/10
   FIBRE_CHANNEL Board: barcode JKM842     part 030-0927-003 rev  E
Location: /hw/node/xtalk/9
       XT-DIGVID Board: barcode MHX098     part 030-1653-002 rev  H
2 400 MHZ IP30 Processors
Heart ASIC: Revision F
CPU: MIPS R12000 Processor Chip Revision: 3.5
FPU: MIPS R12010 Floating Point Chip Revision: 0.0
Main memory size: 2048 Mbytes
Xbow ASIC: Revision 1.4
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
  Disk drive: unit 2 on SCSI controller 0 (unit 2)
  Disk drive: unit 3 on SCSI controller 0 (unit 3)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 1 (unit 1)
Integral SCSI controller 4: Version Fibre Channel AIC-1160, revision 2
Integral SCSI controller 5: Version Fibre Channel AIC-1160, revision 2
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: V12
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3
  PCI Adapter ID (vendor 0x9004, device 0x1160) PCI slot 0
  PCI Adapter ID (vendor 0x9004, device 0x1160) PCI slot 1
XT-DIGVID Multi-standard Digital Video: controller 0, unit 0, version 0x0
socrates 48% /usr/gfx/gfxinfo
Graphics board 0 is "ODYSSEY" graphics.
        Managed (":0.0") 1280x1024
        BUZZ version B.1
        PB&J version 1
        128MB memory
                Banks: 4, CAS latency: 3
         Monitor 0 type: Unknown
        Channel 0:
         Origin = (0,0)
         Video Output: 1280 pixels, 1024 lines, 75.00Hz (1280x1024_75)



octane2.jpg

oct2back.jpg

oct2setup.jpg


Sorry for low photo quality -- mobile phone photos. I'll try to take some with a real camera!

f.
Last edited by fockion on Fri Jan 04, 2013 4:59 am, edited 1 time in total.
:Octane2: 2xR14k 600MHz | 6GB | V12 + DCD
:Octane: R12k 400Mhz | MXE+ PVO
:Indigo2IMP: R4400 250MHz | MAXImpact + IMPACT VIDEO

User avatar
fu
Posts: 1119
Joined: Thu Sep 29, 2005 9:39 am
Location: constant traveler [nyc/london/berlin]
Contact:

Re: Octane 2xR10k 400MHz, 2048MB, V12+DM2+VOB

Unread postby fu » Fri Jan 04, 2013 3:30 am

nice setup fock

did you sort the F190 w/ a proper 13w3 adapter?

just rotate the darn pics so we won't get any νευροκαβαλίκεμα :lol:

User avatar
fockion
Posts: 38
Joined: Tue Jun 01, 2010 2:42 am
Location: Athens, Greece

Re: Octane 2xR10k 400MHz, 2048MB, V12+DM2+VOB

Unread postby fockion » Fri Jan 04, 2013 5:00 am

Hi Fu,

Pics rotated in order to avoid any physical injuries!!!

I made an adapter cable and works OK now, thanks!

f.
:Octane2: 2xR14k 600MHz | 6GB | V12 + DCD
:Octane: R12k 400Mhz | MXE+ PVO
:Indigo2IMP: R4400 250MHz | MAXImpact + IMPACT VIDEO


Return to “SGI: hinv”

Who is online

Users browsing this forum: No registered users and 2 guests