nothing to see here

A place to post hardware inventories.
Forum rules
Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.
User avatar
s0ke
Posts: 161
Joined: Mon Feb 24, 2003 9:27 am
Location: TX

nothing to see here

Unread postby s0ke » Mon Jun 04, 2012 6:31 pm

Back in the day (mid 90's) I had the pleasure of doing contract work for SGI. We worked on accounts such as Disney, Fermi-Lab, LANL..etc. Anyway my first SGI was an Indigo. Then progressively moved to an Indy, an Indigo2, then a couple O2's. Sadly throughout the years machines have come and gone but my trusty Octane2 has stayed with me by my side.

Code: Select all

hinv -v 
1 600 MHZ IP30 Processor
Heart ASIC: Revision F
CPU: MIPS R14000 Processor Chip Revision: 2.4
FPU: MIPS R14010 Floating Point Chip Revision: 0.0
Main memory size: 1024 Mbytes
Xbow ASIC: Revision 1.4
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
  Disk drive: unit 2 on SCSI controller 0 (unit 2)
  Disk drive: unit 3 on SCSI controller 0 (unit 3)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
  CDROM: unit 5 on SCSI controller 1
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: V6
Integral Fast Ethernet: ef0, version 1, pci 2
Gigabit Ethernet: eg1, PCI slot 2, firmware version 0.0.0
Iris Audio Processor: version RAD revision 12.0, number 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3
  PCI Adapter ID (vendor 0x10a9, device 0x0009) PCI slot 2

Graphics board 0 is "ODYSSEY" graphics.
Managed (":0.0") 1280x1024
BUZZ version A.1
PB&J version 1
32MB memory
  Banks: 2, CAS latency: 3
  Monitor 0 type: Unknown
Input Sync: Voltage - Video Level; Source - Internal; Genlocked - False
  Channel 0:
  Origin = (0,0)
  Video Output: 1280 pixels, 1024 lines, 60.00Hz (1280x1024_60)
  Video Format Flags:  (none)
  Sync Disabled
  Using Gamma Map 0
 
IRIX64 lopper 6.5 6.5.22m 10070055 IP30
Attachments
scythe.jpg
capture.JPG
lopperback.jpg
lopperfront.jpg
:Fuel: Redmenace
R16K 700: 2GB: V10:

Return to “SGI: hinv”

Who is online

Users browsing this forum: No registered users and 2 guests

cron