Onyx2 deskside; 4XR10K 250 MHz; 512 Mb, running 6.5.30

A place to post hardware inventories.
Forum rules
Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.
User avatar
Skysearcher
Posts: 45
Joined: Mon Apr 02, 2012 2:19 pm

Onyx2 deskside; 4XR10K 250 MHz; 512 Mb, running 6.5.30

Unread postby Skysearcher » Wed Apr 25, 2012 11:56 am

My hinv -v

Code: Select all

4 250 MHZ IP27 Processors
CPU: MIPS R10000 Processor Chip Revision: 3.4
FPU: MIPS R10010 Floating Point Chip Revision: 3.4
CPU 0 at Module 1/Slot 2/Slice A: 250 Mhz MIPS R10000 Processor Chip (enabled)
  Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz  Tap 0x9
CPU 1 at Module 1/Slot 2/Slice B: 250 Mhz MIPS R10000 Processor Chip (enabled)
  Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz  Tap 0x9
CPU 2 at Module 1/Slot 1/Slice A: 250 Mhz MIPS R10000 Processor Chip (enabled)
  Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz  Tap 0x9
CPU 3 at Module 1/Slot 1/Slice B: 250 Mhz MIPS R10000 Processor Chip (enabled)
  Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz  Tap 0x9
Main memory size: 512 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Memory at Module 1/Slot 82: 256 MB (enabled)
  Bank 0 contains 256 MB (Standard) DIMMS (enabled)
Memory at Module 1/Slot 81: 256 MB (enabled)
  Bank 0 contains 256 MB (Standard) DIMMS (enabled)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
  Disk drive: unit 2 on SCSI controller 0 (unit 2)
  Disk drive: unit 3 on SCSI controller 0 (unit 3)
  CDROM: unit 6 on SCSI controller 0
IOC3/IOC4 serial port: tty5
IOC3/IOC4 serial port: tty6
IOC3/IOC4 serial port: tty7
IOC3/IOC4 serial port: tty8
IOC3/IOC4 serial port: tty9
IOC3/IOC4 serial port: tty10
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
IOC3 parallel port: plp1
Graphics board: InfiniteReality2E
Fast Ethernet: ef1, version 1, module 1, slot io3, pci 0
Fast Ethernet: ef2, version 1, module 1, slot io3, pci 1
Fast Ethernet: ef3, version 1, module 1, slot io3, pci 2
Fast Ethernet: ef4, version 1, module 1, slot io3, pci 3
Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2
Iris Audio Processor: version RAD revision 7.0, number 1
Origin BASEIO board, module 1 slot 1: Revision 4
  PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 0
  PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 2
Origin MENET board, module 1 slot 3: Revision 3
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 0
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 3
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 6
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 7
IOC3/IOC4 external interrupts: 1
HUB in Module 1/Slot 2: Revision 5 Speed 100.00 Mhz (enabled)
HUB in Module 1/Slot 1: Revision 5 Speed 100.00 Mhz (enabled)
IP27prom in Module 1/Slot n2: Revision 6.156
IP27prom in Module 1/Slot n1: Revision 6.156
IO6prom on Global Master Baseio in Module 1/Slot io2: Revision 6.156


And my /usr/gfx/gfxinfo/

Code: Select all

Graphics board 0 is "KONAL" graphics.
        Managed (":0.0") 1280x1024
        Display has 2 channels
        4 GEs (of 4), occmask = 0x0f
        4MB external BEF ram, 32bit path
        1 RM9 board (of 1) 1/0/0/0
        Texture Memory: 64MB/-/-/-
        Medium pixel depth
        32K cmap
        GVO option detected
        Channel 0:
         Origin = (0,0)
         Video Output: 1280 pixels, 1024 lines, 72.00Hz (1280x1024_72.vfo)


A lot is still mumbo jumbo for me, but i'm learning everyday and i love my first SGI so far ;-)

:?: Any comments on this setup and it's strong and/or weak points are welcome :?:
:1600SW: :Indigo2: :O2: :O2: :O2+: :Indigo: :Indigo: previously owned ---> :Onyx2: other stuff : Commodore Amiga A500, Commodore Vic-20 (2x)

Return to “SGI: hinv”

Who is online

Users browsing this forum: No registered users and 1 guest