O2+ R12000 400MHz, 1GB RAM, 73GB HDD

A place to post hardware inventories.
Forum rules
Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.
Posts: 48
Joined: Tue Aug 03, 2010 9:08 am

O2+ R12000 400MHz, 1GB RAM, 73GB HDD

Unread postby telackey » Sun Feb 26, 2012 5:58 pm

Code: Select all

sugarplum 16% hinv -vm
CPU: MIPS R12000 Processor Chip Revision: 3.5
FPU: MIPS R12010 Floating Point Chip Revision: 0.0
1 400 MHZ IP32 Processor
Main memory size: 1024 Mbytes
Secondary unified instruction/data cache size: 2 Mbytes on Processor 0
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
FLASH PROM version 4.18
Integral SCSI controller 0: Version ADAPTEC 7880
  Disk drive: unit 2 on SCSI controller 0 (unit 2)
  CDROM: unit 4 on SCSI controller 0
Integral SCSI controller 1: Version ADAPTEC 7880
On-board serial ports: tty1
On-board serial ports: tty2
On-board EPP/ECP parallel port
CRM graphics installed
Integral Ethernet: ec0, version 1
Iris Audio Processor: version A3 revision 0
  PCI Adapter ID (vendor 0x9004, device 0x8078) PCI slot 1
  PCI Adapter ID (vendor 0x9004, device 0x8078) PCI slot 2
Video: MVP unit 0 version 1.4
AV: AV1 Card version 1, Camera not connected.
Vice: TRE
1600SW Flat Panel adapter board and display.

Code: Select all

sugarplum 17% /usr/gfx/gfxinfo
Graphics board 0 is "CRM" graphics.
        Managed (":0.0") 1600x1024
        32 bitplanes
        board revision 2, CRM revision C, GBE revision B
        Timing table flags:
         Monitor 0 type: Unknown
        Channel 0:
         Origin = (0,0)
         Video Output: 1600 pixels, 1024 lines, 50.00Hz (1600x1024_50p)
Last edited by telackey on Sun Feb 26, 2012 10:35 pm, edited 1 time in total.
:1600SW: :O2: :O2+: :O2: :1600SW:

User avatar
Posts: 542
Joined: Thu Feb 10, 2005 12:37 pm
Location: Laurel, MD USA

Re: O2+ R12000 400MHz, 1GB, 73GB

Unread postby Adrenaline » Sun Feb 26, 2012 6:00 pm

Sweet O2, congrats!
:Indigo: 33mhz R3k/48mb/XS24 :Indy: 150mhz R4400/256mb/XL24 :Fuel: 600mhz R14kA/2gb/V10 Image 8x1.4ghz Itanium 2/8GB :O3x08R: 32x600mhz R14kA/24GB :Tezro: 4x700mhz R16k/8GB/V12/DCD/SAS/FC/DM5 (2x) :O3x0: 4x700mhz R16k/4GB :PrismDT: 2x1.6ghz 8mb/12gb/SAS/2xFGL

Return to “SGI: hinv”

Who is online

Users browsing this forum: No registered users and 2 guests