Octane2,2xR12K 360,1408MB,V10

A place to post hardware inventories.
Forum rules
Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.
m20003293
Posts: 27
Joined: Tue Aug 23, 2011 11:05 pm
Location: NETHERLANDS
Contact:

Octane2,2xR12K 360,1408MB,V10

Unread postby m20003293 » Fri Oct 07, 2011 1:40 am

Still had to post the hinv of my new blue box..

Photos can be found here: http://forums.nekochan.net/viewtopic.php?f=14&t=16725638#p7342740

Selling the green box now on that auction site.. lack of space unfortunately:
http://www.ebay.de/itm/130583330008?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649

Not trying to advertise here, but just look.. these things seem to be worth not really much these days.

Ok.. now for the new box, the infos:

Code: Select all

IRIS 1% hinv -vvm
Location: /hw/node
      PM20360MHZ Board: barcode LKH102     part 030-1591-001 rev  B
        Group ff Capability ffffffff Variety ff Laser 00000053b37d
Location: /hw/node/xtalk/15
            IP30 Board: barcode LKL269     part 030-1467-001 rev  D
        Group ff Capability ffffffff Variety ff Laser 000000593ecc
Location: /hw/node/xtalk/15/pci/2
             FP1 Board: barcode MGE043     part 030-0891-003 rev  J
        Group ff Capability ffffffff Variety ff Laser 00000053aad1
    PWR.SPPLY.ER Board: barcode AAE9140400 part 060-0035-001 rev  C
        Group ff Capability ffffffff Variety ff Laser 0000003445fd
Location: /hw/node/xtalk/13
        XTALKPCI Board: barcode GXH027     part 030-0952-005 rev  C
        Group ff Capability ffffffff Variety ff Laser 000000253d6c
Location: /hw/node/xtalk/11
   ODY32VERSIONB Board: barcode LJV154     part 030-1655-001 rev  C
        Group ff Capability ffffffff Variety ff Laser 000000551488
2 360 MHZ IP30 Processors
Heart ASIC: Revision F
CPU: MIPS R12000 Processor Chip Revision: 3.5
FPU: MIPS R12010 Floating Point Chip Revision: 0.0
Main memory size: 1408 Mbytes
Xbow ASIC: Revision 1.4
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
  Disk drive: unit 2 on SCSI controller 0 (unit 2)
  Disk drive: unit 3 on SCSI controller 0 (unit 3)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
  CDROM: unit 3 on SCSI controller 1
Integral SCSI controller 3: Version QL1080, low voltage differential
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: V10
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3
  PCI Adapter ID (vendor 0x14e4, device 0x1645) PCI slot 1
  PCI Adapter ID (vendor 0x1077, device 0x1080) PCI slot 2
  PCI Adapter ID (vendor 0x114f, device 0x0029) PCI slot 3
PCI card, bus 0, slot 3, Vendor 0x114f, Device 0x8

Code: Select all

IRIS 2% /usr/gfx/gfxinfo
Graphics board 0 is "ODYSSEY" graphics.
        Managed (":0.0") 1280x1024
        BUZZ version B.1
        PB&J version 1
        32MB memory
                Banks: 2, CAS latency: 3
         Monitor 0 type: Unknown


Still trying to get that 3-com gbit controller in slot 1 working.. Patched the driver, still not working :oops:
ImageImageImageImageImageImage

Return to “SGI: hinv”

Who is online

Users browsing this forum: Bing [Bot] and 1 guest