O2: IP32 R12000 270MHz (1MB) CRM rev C, 512MB RAM, HP BD036

A place to post hardware inventories.
Forum rules
Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.
OlaHughson
Posts: 24
Joined: Tue Oct 19, 2010 12:10 pm
Location: Warsaw, Poland
Contact:

O2: IP32 R12000 270MHz (1MB) CRM rev C, 512MB RAM, HP BD036

Unread postby OlaHughson » Mon Sep 19, 2011 12:59 pm

Code: Select all

IRIX Oxygenium 6.5 6.5.22m 10070056 IP32


Code: Select all

CPU: MIPS R12000 Processor Chip Revision: 2.3
FPU: MIPS R12010 Floating Point Chip Revision: 0.0
1 270 MHZ IP32 Processor
Main memory size: 512 Mbytes
Secondary unified instruction/data cache size: 1 Mbyte on Processor 0
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
FLASH PROM version 4.18
Integral SCSI controller 0: Version ADAPTEC 7880
  Disk drive: unit 2 on SCSI controller 0 (unit 2)
  CDROM: unit 4 on SCSI controller 0
Integral SCSI controller 1: Version ADAPTEC 7880
  Tape drive: unit 4 on SCSI controller 1: DAT
On-board serial ports: tty1
On-board serial ports: tty2
On-board EPP/ECP parallel port
CRM graphics installed
Integral Ethernet: ec0, version 1
Iris Audio Processor: version A3 revision 0
  PCI Adapter ID (vendor 0x9004, device 0x8078) PCI slot 1
  PCI Adapter ID (vendor 0x9004, device 0x8078) PCI slot 2
Video: MVP unit 0 version 1.4
AV: AV1 Card version 1, Camera not connected.
Vice: TRE


Photos: http://www.flickr.com/photos/rhadmor/se ... 707408054/
(-)Ola Hughson
Current hardware inventory: http://olatheskunk.pl/computers/

Return to “SGI: hinv”

Who is online

Users browsing this forum: No registered users and 1 guest