Fuel: R16k 800, 2Gb, V10, M-Audio, 36+147GB HD

A place to post hardware inventories.
Forum rules
Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.
User avatar
BetXen
Posts: 268
Joined: Tue Sep 21, 2004 12:05 pm
Location: Vevey, Switzerland

Fuel: R16k 800, 2Gb, V10, M-Audio, 36+147GB HD

Unread postby BetXen » Tue May 03, 2011 2:35 pm

EDITED 12.01.2012: V10 replaced by V12

After so many years I finally decided to buy a fuel. Hopefully Ian, as always, had lots of machines available at a very reasonable price. Moreover, he put so much care in the preparation, personalisation, packing and shipping of it that I'm fully satisfied. If you would like a new box working like a charm, he is definitely the guy you should contact. Thanks again for all, Ian.

I didn't found enough time up to now to discover every personalisation and gift he included... but I will have soon. I'm really looking forward to playing with it. It's such a nice machine.

Let's have a look at its outputs right now !

hinv -mv

Code: Select all

Location: /hw/module/001c01/node
            IP34 Board: barcode NCJ712     part 030-1707-004 rev -C
Location: /hw/module/001c01/node/cpubus/0
        IP34PIMM Board: barcode NNN514     part 030-1932-001 rev -B
###Location: /hw/module/001c01/Ibrick/xtalk/13
###       ASTODYV10 Board: barcode NSR498     part 030-1826-003 rev -A
Location: /hw/module/001c01/Ibrick/xtalk/13
          ASTODY Board: barcode MLD922     part 030-1726-003 rev -E
Location: /hw/module/001c01/Ibrick/xtalk/14
            IP34 Board: barcode NCJ712     part 030-1707-004 rev -C
Location: /hw/module/001c01/Ibrick/xtalk/15
            IP34 Board: barcode NCJ712     part 030-1707-004 rev -C
1 800 MHZ IP35 Processor
CPU: MIPS R16000 Processor Chip Revision: 2.2
FPU: MIPS R16010 Floating Point Chip Revision: 2.2
CPU 0 at Module 001c01/Slot 0/Slice A: 800 Mhz MIPS R16000 Processor Chip (enabled)
  Processor revision: 2.2. Scache: Size 4 MB Speed 400 Mhz  Tap 0xa
Main memory size: 2048 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Memory at Module 001c01/Slot 0: 2048 MB (enabled)
  Bank 0 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 1 contains 1024 MB (Premium) DIMMS (enabled)
Integral SCSI controller 2: Version QL1280, low voltage differential
Integral SCSI controller 3: Version QL1280, low voltage differential
Integral SCSI controller 0: Version QL12160, low voltage differential
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
  Disk drive: unit 2 on SCSI controller 0 (unit 2)
Integral SCSI controller 1: Version QL12160, single ended
  CDROM: unit 4 on SCSI controller 1
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
###Graphics board: V10
Graphics board: V12
Integral Fast Ethernet: ef0, version 1, module 001c01, pci 4
Iris Audio Processor: version MAD revision 1, number 1
  PCI Adapter ID (vendor 0x1077, device 0x1280) PCI slot 1
  PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 1
  PCI Adapter ID (vendor 0x1412, device 0x1724) PCI slot 2
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 4
  PCI Adapter ID (vendor 0x1045, device 0xc861) PCI slot 5
HUB in Module 001c01/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
IP35prom in Module 001c01/Slot n0: Revision 6.210
USB controller: type OHCI

/usr/gfx/gfxinfo -vv

Code: Select all

###Graphics board 0 is "ODYSSEY" graphics.
###        Managed (":0.0") 1920x1200
###        BUZZ version B.2
###        PB&J version 1
###        32MB memory
###                Banks: 2, CAS latency: 3
###         Monitor 0 type: SGX 4352
###        Input Sync: Voltage - Video Level; Source - Internal; Genlocked - False
###        Channel 0:
###         Origin = (0,0)
###         Video Output: 1920 pixels, 1200 lines, 60.02Hz (1920x1200_60)
###         Video Format Flags:  (none)
###         Sync Disabled
###         Using Gamma Map 0
###         Monitor Type:  SGI-4352
###         Gain (all color components) - 0.000000 ; range [1,10]
Graphics board 0 is "ODYSSEY" graphics.
        Managed (":0.0") 1920x1200
        BUZZ version B.1
        PB&J version 1
        128MB memory
                Banks: 4, CAS latency: 3
        Compositor port 1 attached to channel 0 nic 0x1004a768
        CMP:  No NIC serial number available.
         Monitor 0 type: DEL -4075
        Input Sync: Voltage - Video Level; Source - Internal; Genlocked - False
        Channel 0:
         Origin = (0,0)
         Video Output: 1920 pixels, 1200 lines, 60.00Hz (1920x1200_60p)
         Video Format Flags:  (none)
         Sync Disabled
         Using Gamma Map 0
         Monitor Type:  DEL-61461
         Gain (all color components) - 0.000000 ; range [1,10][/i]

uname -aR

Code: Select all

IRIX64 fuel 6.5 6.5.30m 07202013 IP35

scsicontrol -i /dev/scsi/*

Code: Select all

/dev/scsi/sc0d1l0:  Disk          ModusLnkMXO3367SC800600SM108
ANSI vers 3, ISO ver: 0, ECMA ver: 0; supports:  16bit synch linkedcmds cmdqueing
Device is  ready
/dev/scsi/sc0d2l0:  Disk          SGI     HUS103014FL3600 SF00
ANSI vers 3, ISO ver: 0, ECMA ver: 0; supports:  16bit synch linkedcmds cmdqueing
Device is  ready
/dev/scsi/sc1d4l0:  CD-ROM        TOSHIBA DVD-ROM SD-M14011F09
ANSI vers 2, ISO ver: 0, ECMA ver: 0; supports:  synch linkedcmds
Device is  not ready

/sbin/diskpatch -v

Code: Select all

sc0d1l0:  Disk         ModusLnkMXO3367SC800600SM108  Serial: ML000024
sc0d2l0:  Disk         SGI     HUS103014FL3600 SF00  Serial: V5VBZUGA

Finally, thanks to ratfink and its hinv output, some l1 commands I couldn't have guessed by myself ;-)

l1cmd serial all

Code: Select all

Data                            Location      Value
------------------------------  ------------  --------
Local System Serial Number      EEPROM        08:00:69:10:7C:A7
Local Brick Serial Number       EEPROM        NCJ712
Reference Brick Serial Number   NVRAM         NCJ712


EEPROM      Product Name    Serial         Part Number           Rev  T/W   
----------  --------------  -------------  --------------------  ---  ------
NODE        IP34            NCJ712         030_1707_004          C    00   
MAC         MAC ADDRESS     NA             NA                    NA   NA   
PIMM        IP34PIMM        NNN514         030_1932_001          B    00   
###XIO         ASTODYV10       NSR498         030_1826_003          A    00
XIO         ASTODY          MLD922         030_1726_003          E    00

EEPROM     JEDEC-SPD Info           Part Number        Rev  Speed  SGI     
---------- ------------------------ ------------------ ---- ------ --------
DIMM 0     CE000000000000000C989800 M3 46L2820DT2-CA0   2D   10.0  N/A     
DIMM 2     no hardware detected
DIMM 1     CE000000000000000C7F9800 M3 46L2820DT2-CA0   2D   10.0  N/A     
DIMM 3     no hardware detected


l1cmd flash status

Code: Select all

Flash image B currently booted

Image      Status        Revision    Built
-----   -------------   ----------   -----
  A     valid           1.40.4       09/29/2005 13:43:39
  B     default         1.40.4       09/29/2005 13:43:39


l1cmd env

Code: Select all

Environmental monitoring is enabled and running.

Description    State       Warning Limits     Fault Limits       Current
-------------- ----------  -----------------  -----------------  -------
           12V    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.125
        12V IO    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.125
            5V    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    5.096
          3.3V    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.320
          2.5V    Enabled  10%   2.25/  2.75  20%   2.00/  3.00    2.470
          1.5V    Enabled  10%   1.35/  1.65  20%   1.20/  1.80    1.466
        5V AUX    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    5.096
      3.3V AUX    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.285
 PIMM 12V BIAS    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.125
          SRAM    Enabled  10%   2.25/  2.75  20%   2.00/  3.00    2.496
          VCPU    Enabled  10%   1.13/  1.38  20%   1.00/  1.50    1.255
     PIMM 1.5V    Enabled  10%   1.35/  1.65  20%   1.20/  1.80    1.495
 PIMM 3.3V AUX    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.268
   PIMM 5V AUX    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    5.096
  XIO 12V BIAS    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.000
        XIO 5V    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    5.070
      XIO 2.5V    Enabled  10%   2.25/  2.75  20%   2.00/  3.00    2.457
  XIO 3.3V AUX    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.285

Description     State       Warning RPM  Current RPM
--------------- ----------  -----------  -----------
FAN  0  EXHAUST    Enabled          920         1188
FAN  1       HD    Enabled         1560         2122
FAN  2      PCI    Enabled         1120         1534
FAN  3    XIO 1    Enabled         1600         2721
FAN  4    XIO 2    Enabled         1600         2596
FAN  5       PS    Enabled         1349         3276

                              Advisory   Critical   Fault      Current     
Description       State       Temp       Temp       Temp       Temp       
----------------- ----------  ---------  ---------  ---------  --------- 
 0 NODE 0            Enabled    [Autofan Control]    80C/176F   40C/104F
 1 NODE 1            Enabled    [Autofan Control]    80C/176F   41C/105F
 2 NODE 2            Enabled    [Autofan Control]    80C/176F   32C/ 89F
 3 PIMM              Enabled    [Autofan Control]    80C/176F   47C/116F
 4 ODYSSEY           Enabled    [Autofan Control]    80C/176F   45C/113F
 5 BEDROCK           Enabled    [Autofan Control]    85C/185F   44C/111F


Hope you like it.


BetXen
Last edited by BetXen on Thu Jan 12, 2012 12:48 pm, edited 3 times in total.
:Onyx2: : oxygen / :A3504L: :A3504L: : neon (16xItanium2 1.6, L2 9MB) / :O200: :O200: : beryllium
:Fuel: : nitrogen / :Octane2: : carbon / :Octane: : fluorine
:O2: : hydrogen (R10k 195, 512Mo) / :O2: : sodium (R5k 180, 512Mo) / :O2: : R5k 180->200 motherboard and PM only
:Indigo2IMP: : helium (R10k 195, HighImpact, 160Mo) / :Indigo2IMP: : boron / :Indigo: : magnesium
:4D70G: 4D70GT : hydrogen, my very first one (now property of musée bolo and the foundation mémoires informatiques)
See the hinv/gfxinfo posts here.

User avatar
smj
Posts: 1410
Joined: Mon Nov 12, 2007 8:54 pm
Location: Berkeley, CA, USA, NA, Earth, Sol
Contact:

Re: Fuel: R16k 800, 2Gb, V10, M-Audio, 36+147GB HD

Unread postby smj » Wed May 04, 2011 2:16 am

Wow, great machine! Which manufacturer is the drive identifying itself with the tag "ModusLnk" from, Fujitsu? Some indication this is the case from a quick Google search, but not definitive...
Then? :IRIS3130: ... Now? :O3x02L: :A3504L:- :A3502L: :1600SW:+MLA :Fuel: :Octane2: :Octane: :Indigo2IMP: ... Other: DEC :BA213: :BA123: Sun, DG AViiON, NeXT :Cube:

User avatar
BetXen
Posts: 268
Joined: Tue Sep 21, 2004 12:05 pm
Location: Vevey, Switzerland

Re: Fuel: R16k 800, 2Gb, V10, M-Audio, 36+147GB HD

Unread postby BetXen » Wed May 04, 2011 3:39 am

It is a Fujitsu Worldisk, 36GB. I'll have a look at it this evening and give you more details soon. Maybe Ian will read this post and could answer better and faster than me.

If someone wonders what monitor I have, here is tha answer: GDM-FW9011. Sgi 24" 16:10 CRT weighting more than 50kg. My back still remembers (I used to live on the 5th floor without elevator).
:Onyx2: : oxygen / :A3504L: :A3504L: : neon (16xItanium2 1.6, L2 9MB) / :O200: :O200: : beryllium
:Fuel: : nitrogen / :Octane2: : carbon / :Octane: : fluorine
:O2: : hydrogen (R10k 195, 512Mo) / :O2: : sodium (R5k 180, 512Mo) / :O2: : R5k 180->200 motherboard and PM only
:Indigo2IMP: : helium (R10k 195, HighImpact, 160Mo) / :Indigo2IMP: : boron / :Indigo: : magnesium
:4D70G: 4D70GT : hydrogen, my very first one (now property of musée bolo and the foundation mémoires informatiques)
See the hinv/gfxinfo posts here.

User avatar
smj
Posts: 1410
Joined: Mon Nov 12, 2007 8:54 pm
Location: Berkeley, CA, USA, NA, Earth, Sol
Contact:

Re: Fuel: R16k 800, 2Gb, V10, M-Audio, 36+147GB HD

Unread postby smj » Wed May 04, 2011 12:38 pm

BetXen wrote:GDM-FW9011. Sgi 24" 16:10 CRT weighting more than 50kg. My back still remembers (I used to live on the 5th floor without elevator).
No doubt! I lived in a 6th floor walk-up in Manhattan for four years in the mid- to late-90s, and around the end of the first year had a monstrous Idek Iiyama 21" w/ motorized tilt/swivel base delivered. (I hope I tipped well for that delivery!) When I left I had movers deal with it, thank goodness...
Then? :IRIS3130: ... Now? :O3x02L: :A3504L:- :A3502L: :1600SW:+MLA :Fuel: :Octane2: :Octane: :Indigo2IMP: ... Other: DEC :BA213: :BA123: Sun, DG AViiON, NeXT :Cube:

User avatar
BetXen
Posts: 268
Joined: Tue Sep 21, 2004 12:05 pm
Location: Vevey, Switzerland

Re: Fuel: R16k 800, 2Gb, V10, M-Audio, 36+147GB HD

Unread postby BetXen » Wed May 04, 2011 2:19 pm

So... the hard disk label says:

Code: Select all

Capacity          36.7GB
RPM               15000
Interface         SCSI 80 PIN
MODEL             MX03367SC800600S


You were right !
:Onyx2: : oxygen / :A3504L: :A3504L: : neon (16xItanium2 1.6, L2 9MB) / :O200: :O200: : beryllium
:Fuel: : nitrogen / :Octane2: : carbon / :Octane: : fluorine
:O2: : hydrogen (R10k 195, 512Mo) / :O2: : sodium (R5k 180, 512Mo) / :O2: : R5k 180->200 motherboard and PM only
:Indigo2IMP: : helium (R10k 195, HighImpact, 160Mo) / :Indigo2IMP: : boron / :Indigo: : magnesium
:4D70G: 4D70GT : hydrogen, my very first one (now property of musée bolo and the foundation mémoires informatiques)
See the hinv/gfxinfo posts here.

User avatar
[[C|-|E]]
Posts: 412
Joined: Wed Mar 02, 2011 2:37 am
Location: London - UK

Re: Fuel: R16k 800, 2Gb, V10, M-Audio, 36+147GB HD

Unread postby [[C|-|E]] » Thu May 05, 2011 9:35 am

It would be very nice to show some pics of that great machine :D.
Image _Betty Blue_
R12000A 400 Mhz; 1 Gb RAM; 72 Gb 15K HDD; IRIX 6.5.29
CrystalEyes; Dial Box; O2Cam "ZEYE"; external Toshiba SD-M1711 DVD-ROM; Octane speakers;
Lock bar; SGI microphone.
Mods: PSU Noctua fan; internal Toshiba SD-M1401 DVD-ROM; Adaptec AIC-7880P SCSI card.

_REKIEM_I7_
Seasonic X 1250W PSU / Intel I7 2600k 4 x 5,00 Ghz / 2 x Gainward 2Gb GTX 560Ti Phantom 2 / 32 Gb DDR3 / Intel x25-M 160 Gb SSD and 10 extra Tb
_REKIEM_T5400_
875W PSU / 2 x Intel Xeon Harpertown 4 x 2,83 Ghz with 12 MB cache / 1 x Zotac 1Gb GTX 440 / 32 Gb DDR2 667 ECC / Samsung 840 Series Pro 128GB SSD and 1 extra Tb

User avatar
BetXen
Posts: 268
Joined: Tue Sep 21, 2004 12:05 pm
Location: Vevey, Switzerland

Re: Fuel: R16k 800, 2Gb, V10, M-Audio, 36+147GB HD

Unread postby BetXen » Thu May 05, 2011 9:41 am

I'll try to take some this evening... stay tuned !
:Onyx2: : oxygen / :A3504L: :A3504L: : neon (16xItanium2 1.6, L2 9MB) / :O200: :O200: : beryllium
:Fuel: : nitrogen / :Octane2: : carbon / :Octane: : fluorine
:O2: : hydrogen (R10k 195, 512Mo) / :O2: : sodium (R5k 180, 512Mo) / :O2: : R5k 180->200 motherboard and PM only
:Indigo2IMP: : helium (R10k 195, HighImpact, 160Mo) / :Indigo2IMP: : boron / :Indigo: : magnesium
:4D70G: 4D70GT : hydrogen, my very first one (now property of musée bolo and the foundation mémoires informatiques)
See the hinv/gfxinfo posts here.

User avatar
BetXen
Posts: 268
Joined: Tue Sep 21, 2004 12:05 pm
Location: Vevey, Switzerland

Re: Fuel: R16k 800, 2Gb, V10, M-Audio, 36+147GB HD

Unread postby BetXen » Sun May 08, 2011 2:57 pm

As promised, here are some pics of my new toy and its friends... made in a hurry as I will leave for a business trip tomorrow morning. I'll take better pictures later.

DSC_3958.JPG
One corner of my actual computer room

DSC_3965.JPG
My new fuel in good company

DSC_3966.JPG
All the sgi now in my hands

See you.
:Onyx2: : oxygen / :A3504L: :A3504L: : neon (16xItanium2 1.6, L2 9MB) / :O200: :O200: : beryllium
:Fuel: : nitrogen / :Octane2: : carbon / :Octane: : fluorine
:O2: : hydrogen (R10k 195, 512Mo) / :O2: : sodium (R5k 180, 512Mo) / :O2: : R5k 180->200 motherboard and PM only
:Indigo2IMP: : helium (R10k 195, HighImpact, 160Mo) / :Indigo2IMP: : boron / :Indigo: : magnesium
:4D70G: 4D70GT : hydrogen, my very first one (now property of musée bolo and the foundation mémoires informatiques)
See the hinv/gfxinfo posts here.

User avatar
smj
Posts: 1410
Joined: Mon Nov 12, 2007 8:54 pm
Location: Berkeley, CA, USA, NA, Earth, Sol
Contact:

Re: Fuel: R16k 800, 2Gb, V10, M-Audio, 36+147GB HD

Unread postby smj » Mon May 09, 2011 4:14 pm

Nice lair. And wow, intact Origin 200 plastic! Now, how do we go about duplicating them...? ;)
Then? :IRIS3130: ... Now? :O3x02L: :A3504L:- :A3502L: :1600SW:+MLA :Fuel: :Octane2: :Octane: :Indigo2IMP: ... Other: DEC :BA213: :BA123: Sun, DG AViiON, NeXT :Cube:

User avatar
BetXen
Posts: 268
Joined: Tue Sep 21, 2004 12:05 pm
Location: Vevey, Switzerland

Re: Fuel: R16k 800, 2Gb, V10, M-Audio, 36+147GB HD

Unread postby BetXen » Tue May 10, 2011 9:20 am

"Nice lair" you said... yes, because I've juste made order before the photo. Normally it's significantly more messy :)

Regarding the O200, the skins WERE perfect when they were given to me, as the O200 was used in my university and never moved since their installation. Unfortunately I didn't know the plastics were so fragile and tilted one of the towers during a move. Two feet immediately broke, so I had to remove the two others. Finaly, one door "axis" broke too, but on the other module... grrrr !

Anyway, If you know how to make them reproduce, give me a call ! It would be funny to have a baby O200 as paperweight...
:Onyx2: : oxygen / :A3504L: :A3504L: : neon (16xItanium2 1.6, L2 9MB) / :O200: :O200: : beryllium
:Fuel: : nitrogen / :Octane2: : carbon / :Octane: : fluorine
:O2: : hydrogen (R10k 195, 512Mo) / :O2: : sodium (R5k 180, 512Mo) / :O2: : R5k 180->200 motherboard and PM only
:Indigo2IMP: : helium (R10k 195, HighImpact, 160Mo) / :Indigo2IMP: : boron / :Indigo: : magnesium
:4D70G: 4D70GT : hydrogen, my very first one (now property of musée bolo and the foundation mémoires informatiques)
See the hinv/gfxinfo posts here.

User avatar
jan-jaap
Posts: 4014
Joined: Thu Jun 17, 2004 11:35 am
Location: Wijchen, The Netherlands

Re: Fuel: R16k 800, 2Gb, V10, M-Audio, 36+147GB HD

Unread postby jan-jaap » Wed May 11, 2011 12:46 am

BetXen wrote:"Nice lair" you said... yes, because I've juste made order before the photo. Normally it's significantly more messy :)

Regarding the O200, the skins WERE perfect when they were given to me, as the O200 was used in my university and never moved since their installation. Unfortunately I didn't know the plastics were so fragile and tilted one of the towers during a move. Two feet immediately broke, so I had to remove the two others. Finaly, one door "axis" broke too, but on the other module... grrrr !

Anyway, If you know how to make them reproduce, give me a call ! It would be funny to have a baby O200 as paperweight...


When I got my O200, two or three of it's feet were attached with double sided tape :?
I drilled a hole through the 'foot hinge' and with a bolt + nut it's now stronger than when it was new.
Now this is a deep dark secret, so everybody keep it quiet :)
It turns out that when reset, the WD33C93 defaults to a SCSI ID of 0, and it was simpler to leave it that way... -- Dave Olson, in comp.sys.sgi

Currently in commercial service: Image :Onyx2:(2x) :O3x02L:
In the museum: almost every MIPS/IRIX system.
Wanted: GM1 board for Professional Series GT graphics (030-0076-003, 030-0076-004)

User avatar
BetXen
Posts: 268
Joined: Tue Sep 21, 2004 12:05 pm
Location: Vevey, Switzerland

Re: Fuel: R16k 800, 2Gb, V10, M-Audio, 36+147GB HD

Unread postby BetXen » Wed May 11, 2011 12:55 am

Good idea. I'll try that. They are already broken, so I can't do worse...
:Onyx2: : oxygen / :A3504L: :A3504L: : neon (16xItanium2 1.6, L2 9MB) / :O200: :O200: : beryllium
:Fuel: : nitrogen / :Octane2: : carbon / :Octane: : fluorine
:O2: : hydrogen (R10k 195, 512Mo) / :O2: : sodium (R5k 180, 512Mo) / :O2: : R5k 180->200 motherboard and PM only
:Indigo2IMP: : helium (R10k 195, HighImpact, 160Mo) / :Indigo2IMP: : boron / :Indigo: : magnesium
:4D70G: 4D70GT : hydrogen, my very first one (now property of musée bolo and the foundation mémoires informatiques)
See the hinv/gfxinfo posts here.

User avatar
smj
Posts: 1410
Joined: Mon Nov 12, 2007 8:54 pm
Location: Berkeley, CA, USA, NA, Earth, Sol
Contact:

Re: Fuel: R16k 800, 2Gb, V10, M-Audio, 36+147GB HD

Unread postby smj » Wed May 11, 2011 10:19 am

BetXen wrote:Anyway, If you know how to make them reproduce, give me a call ! It would be funny to have a baby O200 as paperweight...

Well I don't, but fellow nekochanner sgifanatic has been developing aluminum skins for the IRIS Indigo in this thread - it's long, but stick with it and you'll see some amazing replacement parts.
Then? :IRIS3130: ... Now? :O3x02L: :A3504L:- :A3502L: :1600SW:+MLA :Fuel: :Octane2: :Octane: :Indigo2IMP: ... Other: DEC :BA213: :BA123: Sun, DG AViiON, NeXT :Cube:

User avatar
PymbleSoftware
Posts: 1887
Joined: Tue Jul 15, 2008 5:48 pm
Location: P.O. Box 121, Pymble, Sydney, NSW 2073, Australia.
Contact:

Re: Fuel: R16k 800, 2Gb, V10, M-Audio, 36+147GB HD

Unread postby PymbleSoftware » Wed May 11, 2011 2:42 pm

smj wrote:
BetXen wrote:Anyway, If you know how to make them reproduce, give me a call ! It would be funny to have a baby O200 as paperweight...

Well I don't, but fellow nekochanner sgifanatic has been developing aluminum skins for the IRIS Indigo in this thread - it's long, but stick with it and you'll see some amazing replacement parts.



I used to dabble in plastic

R.
死の神はりんごだけ食べる

開いた括弧は必ず閉じる -- あるプログラマー

:Tezro: :Tezro: :Onyx2R: :Onyx2RE: :Onyx2: :O3x04R: :O3x0: :O200: :Octane: :Octane2: :O2: :O2: :Indigo2IMP: :PI: :PI: :1600SW: :1600SW: :Indy: :Indy: :Indy: :Indy: :Indy:
:hpserv: J5600, 2 x Mac, 3 x SUN, Alpha DS20E, Alpha 800 5/550, 3 x RS/6000, Amiga 4000 VideoToaster, Amiga4000 -030, 733MHz Sam440 AmigaOS 4.1 update 1.

Sold: :Indy: :Indy: :Indy: :Indigo: Tandem Himalaya S-Series Nonstop S72000 ServerNet.

@PymbleSoftware
Current Apps -> https://itunes.apple.com/au/artist/pymb ... d553990081
Cortex ---> http://www.facebook.com/pages/Cortex-th ... 11?sk=info
Minnie ---> http://www.facebook.com/pages/Minnie-th ... 02?sk=info
Github ---> https://github.com/pymblesoftware
Visit http://www.pymblesoftware.com
Search for "Pymble", "InstaElf", "CryWhy" or "Cricket Score Sheet" in the iPad App store or search for "Pymble" or "CryWhy" in the iPhone App store.

User avatar
BetXen
Posts: 268
Joined: Tue Sep 21, 2004 12:05 pm
Location: Vevey, Switzerland

Re: Fuel: R16k 800, 2Gb, V10, M-Audio, 36+147GB HD

Unread postby BetXen » Wed May 11, 2011 11:58 pm

I just read you old topic PS. At work, we'll probably buy a Faro 3D digitizer in a near future. If my collegues from the metrology let me use it, I could maybe give you the dimensions of a o200 skins, even a 3d model if I found enough time to process the data.

We'll see in a few weeks or months.
:Onyx2: : oxygen / :A3504L: :A3504L: : neon (16xItanium2 1.6, L2 9MB) / :O200: :O200: : beryllium
:Fuel: : nitrogen / :Octane2: : carbon / :Octane: : fluorine
:O2: : hydrogen (R10k 195, 512Mo) / :O2: : sodium (R5k 180, 512Mo) / :O2: : R5k 180->200 motherboard and PM only
:Indigo2IMP: : helium (R10k 195, HighImpact, 160Mo) / :Indigo2IMP: : boron / :Indigo: : magnesium
:4D70G: 4D70GT : hydrogen, my very first one (now property of musée bolo and the foundation mémoires informatiques)
See the hinv/gfxinfo posts here.


Return to “SGI: hinv”

Who is online

Users browsing this forum: No registered users and 1 guest