Nekochan Net

Official Chat Channel: #nekochan // irc.nekochan.net
It is currently Sat May 25, 2013 7:48 am

View unanswered posts | View active topics View unread posts


Board index » SGI » SGI: hinv

All times are UTC - 8 hours


Forum rules


Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.



Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 
  Print view Previous topic | First unread post | Next topic 
Author Message
rusti
Unread postPosted: Thu Dec 16, 2010 12:59 pm 
Offline
User avatar

Joined: Sun Nov 29, 2009 2:20 am
Posts: 174
Location: Brussels, Belgium
As ramq already anounced after making a safe trip from Sweden to Belgium some of his Origin 350 found a new home:

Code:
# hinv -mv
Location: /hw/module/001c01/node
       IP53_4CPU Board: barcode MXL801     part 030-1868-001 rev -C
Location: /hw/module/001c01/IXbrick/xtalk/15
       2U_INT_53 Board: barcode MTC645     part 030-1809-003 rev -A
Location: /hw/module/001c01/IXbrick/xtalk/15/pci-x/0/1/ioc4
             IO9 Board: barcode MTS394     part 030-1771-005 rev -A
Location: /hw/module/001c02/node
       IP53_4CPU Board: barcode MXM753     part 030-1868-001 rev -C
Location: /hw/module/001c02/IXbrick/xtalk/15
       2U_INT_53 Board: barcode MTC260     part 030-1809-003 rev -A
Location: /hw/module/001c02/IXbrick/xtalk/15/pci-x/0/1/ioc4
             IO9 Board: barcode MTS540     part 030-1771-005 rev -A
Location: /hw/module/001c03/node
       IP53_4CPU Board: barcode MTA286     part 030-1868-001 rev -C
Location: /hw/module/001c03/IXbrick/xtalk/15
       2U_INT_53 Board: barcode MTC266     part 030-1809-003 rev -A
Location: /hw/module/001c04/node
       IP53_4CPU Board: barcode MTA290     part 030-1868-001 rev -C
Location: /hw/module/001c04/IXbrick/xtalk/15
       2U_INT_53 Board: barcode MTC253     part 030-1809-003 rev -A
Location: /hw/module/001r05/router
          ROUTER Board: barcode MVA352     part 030-1634-003 rev -A
16 700 MHZ IP35 Processors
CPU: MIPS R16000 Processor Chip Revision: 2.1
FPU: MIPS R16010 Floating Point Chip Revision: 2.1
CPU 0 at Module 001c01/Slot 0/Slice A: 700 Mhz MIPS R16000 Processor Chip (enabled)
  Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0xc
CPU 1 at Module 001c01/Slot 0/Slice B: 700 Mhz MIPS R16000 Processor Chip (enabled)
  Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0xc
CPU 2 at Module 001c01/Slot 0/Slice C: 700 Mhz MIPS R16000 Processor Chip (enabled)
  Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0xc
CPU 3 at Module 001c01/Slot 0/Slice D: 700 Mhz MIPS R16000 Processor Chip (enabled)
  Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0xc
CPU 4 at Module 001c02/Slot 0/Slice A: 700 Mhz MIPS R16000 Processor Chip (enabled)
  Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0xc
CPU 5 at Module 001c02/Slot 0/Slice B: 700 Mhz MIPS R16000 Processor Chip (enabled)
  Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0xc
CPU 6 at Module 001c02/Slot 0/Slice C: 700 Mhz MIPS R16000 Processor Chip (enabled)
  Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0xc
CPU 7 at Module 001c02/Slot 0/Slice D: 700 Mhz MIPS R16000 Processor Chip (enabled)
  Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0xc
CPU 8 at Module 001c03/Slot 0/Slice A: 700 Mhz MIPS R16000 Processor Chip (enabled)
  Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0xc
CPU 9 at Module 001c03/Slot 0/Slice B: 700 Mhz MIPS R16000 Processor Chip (enabled)
  Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0xc
CPU 10 at Module 001c03/Slot 0/Slice C: 700 Mhz MIPS R16000 Processor Chip (enabled)
  Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0xc
CPU 11 at Module 001c03/Slot 0/Slice D: 700 Mhz MIPS R16000 Processor Chip (enabled)
  Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0xc
CPU 12 at Module 001c04/Slot 0/Slice A: 700 Mhz MIPS R16000 Processor Chip (enabled)
  Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0xc
CPU 13 at Module 001c04/Slot 0/Slice B: 700 Mhz MIPS R16000 Processor Chip (enabled)
  Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0xc
CPU 14 at Module 001c04/Slot 0/Slice C: 700 Mhz MIPS R16000 Processor Chip (enabled)
  Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0xc
CPU 15 at Module 001c04/Slot 0/Slice D: 700 Mhz MIPS R16000 Processor Chip (enabled)
  Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0xc
Main memory size: 16384 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Memory at Module 001c01/Slot 0: 4096 MB (enabled)
  Bank 0 contains 512 MB (Premium) DIMMS (enabled)
  Bank 1 contains 512 MB (Premium) DIMMS (enabled)
  Bank 2 contains 512 MB (Premium) DIMMS (enabled)
  Bank 3 contains 512 MB (Premium) DIMMS (enabled)
  Bank 4 contains 512 MB (Premium) DIMMS (enabled)
  Bank 5 contains 512 MB (Premium) DIMMS (enabled)
  Bank 6 contains 512 MB (Premium) DIMMS (enabled)
  Bank 7 contains 512 MB (Premium) DIMMS (enabled)
Memory at Module 001c02/Slot 0: 4096 MB (enabled)
  Bank 0 contains 512 MB (Premium) DIMMS (enabled)
  Bank 1 contains 512 MB (Premium) DIMMS (enabled)
  Bank 2 contains 512 MB (Premium) DIMMS (enabled)
  Bank 3 contains 512 MB (Premium) DIMMS (enabled)
  Bank 4 contains 512 MB (Premium) DIMMS (enabled)
  Bank 5 contains 512 MB (Premium) DIMMS (enabled)
  Bank 6 contains 512 MB (Premium) DIMMS (enabled)
  Bank 7 contains 512 MB (Premium) DIMMS (enabled)
Memory at Module 001c03/Slot 0: 4096 MB (enabled)
  Bank 0 contains 512 MB (Standard) DIMMS (enabled)
  Bank 1 contains 512 MB (Standard) DIMMS (enabled)
  Bank 2 contains 512 MB (Standard) DIMMS (enabled)
  Bank 3 contains 512 MB (Standard) DIMMS (enabled)
  Bank 4 contains 512 MB (Standard) DIMMS (enabled)
  Bank 5 contains 512 MB (Standard) DIMMS (enabled)
  Bank 6 contains 512 MB (Standard) DIMMS (enabled)
  Bank 7 contains 512 MB (Standard) DIMMS (enabled)
Memory at Module 001c04/Slot 0: 4096 MB (enabled)
  Bank 0 contains 512 MB (Standard) DIMMS (enabled)
  Bank 1 contains 512 MB (Standard) DIMMS (enabled)
  Bank 2 contains 512 MB (Standard) DIMMS (enabled)
  Bank 3 contains 512 MB (Standard) DIMMS (enabled)
  Bank 4 contains 512 MB (Standard) DIMMS (enabled)
  Bank 5 contains 512 MB (Standard) DIMMS (enabled)
  Bank 6 contains 512 MB (Standard) DIMMS (enabled)
  Bank 7 contains 512 MB (Standard) DIMMS (enabled)
ROUTER in Module 001c01/Slot 0: Revision 1: Active Ports [2,3,4,5,] (enabled)
Integral SCSI controller 3: Version IDE (ATA/ATAPI) IOC4
Integral SCSI controller 2: Version IDE (ATA/ATAPI) IOC4
  CDROM: unit 0 on SCSI controller 2
Integral SCSI controller 4: Version QL12160, low voltage differential
Integral SCSI controller 5: Version QL12160, low voltage differential
Integral SCSI controller 0: Version QL12160, low voltage differential
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL12160, low voltage differential
IOC3/IOC4 serial port: tty7
IOC3/IOC4 serial port: tty8
IOC3/IOC4 serial port: tty9
IOC3/IOC4 serial port: tty10
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
IOC3/IOC4 serial port: tty5
IOC3/IOC4 serial port: tty6
Gigabit Ethernet: tg1, module 001c02, PCI bus 1 slot 4
Integral Gigabit Ethernet: tg0, module 001c01, PCI bus 1 slot 4
  PCI Adapter ID (vendor 0x10a9, device 0x100a) PCI slot 1
  PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 3
  PCI Adapter ID (vendor 0x14e4, device 0x1645) PCI slot 4
  PCI Adapter ID (vendor 0x10a9, device 0x100a) PCI slot 1
  PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 3
  PCI Adapter ID (vendor 0x14e4, device 0x1645) PCI slot 4
IOC4 firmware revision 79
IOC4 firmware revision 79
IOC3/IOC4 external interrupts: 2
IOC3/IOC4 external interrupts: 1
HUB in Module 001c01/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
HUB in Module 001c02/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
HUB in Module 001c03/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
HUB in Module 001c04/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
IP35prom in Module 001c01/Slot n0: Revision 6.210
IP35prom in Module 001c02/Slot n0: Revision 6.210
IP35prom in Module 001c03/Slot n0: Revision 6.210
IP35prom in Module 001c04/Slot n0: Revision 6.210


Code:
# uname -aR
IRIX64 moff 6.5 6.5.30f 07202013 IP35


Code:
# scsicontrol -i /dev/scsi/sc0d1l0
/dev/scsi/sc0d1l0:  Disk          IBM-ESXSST373307LC    F B258
ANSI vers 3, ISO ver: 0, ECMA ver: 0; supports:  16bit synch linkedcmds cmdqueing
Device is  ready
# scsicontrol -i /dev/scsi/sc2d0l0
/dev/scsi/sc2d0l0:  CD-ROM        MATSHITADVD-ROM SR-8178 PZ16
ANSI vers 0, ISO ver: 0, ECMA ver: 0; supports:
Device is  ready


Code:
# /sbin/diskpatch -v
sc0d1l0:  Disk         IBM-ESXSST373307LC    F B258  Serial: 3HZ0H6X7


Code:
# l1cmd serial all

Data                            Location      Value
------------------------------  ------------  --------
Local System Serial Number      NVRAM         M2100629
Reference System Serial Number  NVRAM         M2100629
Local Brick Serial Number       EEPROM        MTC645
Reference Brick Serial Number   NVRAM         MTC645


EEPROM      Product Name    Serial      Part Number           Rev  T/W
----------  --------------  ----------  --------------------  ---  ------
INTERFACE   2U_INT_53       MTC645      030_1809_003          A    00
IO9         IO9             MTS394      030_1771_005          A    00
ODYSSEY     no hardware detected
RISER       2U_RISER        MXN295      030_1808_005          A    00
NODE        IP53_4CPU       MXL801      030_1868_001          C    00

EEPROM     JEDEC-SPD Info           Part Number        Rev Speed  SGI
---------- ------------------------ ------------------ --- ------ --------
DIMM 0     CE000000000000005F5C0900 M3 46L6510BT1-CA0  0B   10.0  NO DATA
DIMM 2     CE000000000000005F4B0900 M3 46L6510BT1-CA0  0B   10.0  NO DATA
DIMM 4     CE000000000000002763F500 M3 46L6510BT1-CA0  0B   10.0  NO DATA
DIMM 6     CE00000000000000275EF500 M3 46L6510BT1-CA0  0B   10.0  NO DATA
DIMM 1     CE000000000000005F880800 M3 46L6510BT1-CA0  0B   10.0  NO DATA
DIMM 3     CE000000000000005F040900 M3 46L6510BT1-CA0  0B   10.0  NO DATA
DIMM 5     CE000000000000005FEC0800 M3 46L6510BT1-CA0  0B   10.0  NO DATA
DIMM 7     CE000000000000005F0C0900 M3 46L6510BT1-CA0  0B   10.0  NO DATA

[code]# l1cmd --scdev /hw/module/001c02/L1/controller serial all

Data                            Location      Value
------------------------------  ------------  --------
Local System Serial Number      NVRAM         M2100629
Reference System Serial Number  NVRAM         M2100629
Local Brick Serial Number       EEPROM        MTC260
Reference Brick Serial Number   NVRAM         MTC260


EEPROM      Product Name    Serial      Part Number           Rev  T/W
----------  --------------  ----------  --------------------  ---  ------
INTERFACE   2U_INT_53       MTC260      030_1809_003          A    00
IO9         IO9             MTS540      030_1771_005          A    00
ODYSSEY     no hardware detected
RISER       2U_RISER        MXN209      030_1808_005          A    00
NODE        IP53_4CPU       MXM753      030_1868_001          C    00

EEPROM     JEDEC-SPD Info           Part Number        Rev Speed  SGI
---------- ------------------------ ------------------ --- ------ --------
DIMM 0     CE000000000000005F110900 M3 46L6510BT1-CA0  0B   10.0  NO DATA
DIMM 2     CE00000000000000275DF500 M3 46L6510BT1-CA0  0B   10.0  NO DATA
DIMM 4     CE000000000000005FC80C00 M3 46L6510BT1-CA0  0B   10.0  NO DATA
DIMM 6     CE0000000000000027963B00 M3 46L6510BT1-CA0  0B   10.0  NO DATA
DIMM 1     CE000000000000005F010900 M3 46L6510BT1-CA0  0B   10.0  NO DATA
DIMM 3     CE000000000000005F800800 M3 46L6510BT1-CA0  0B   10.0  NO DATA
DIMM 5     CE000000000000005FF40800 M3 46L6510BT1-CA0  0B   10.0  NO DATA
DIMM 7     CE0000000000000028AF5802 M3 46L6510BT1-CA0  0B   10.0  NO DATA


# l1cmd --scdev /hw/module/001c03/L1/controller serial all

Data                            Location      Value
------------------------------  ------------  --------
Local System Serial Number      NVRAM         M2100629
Reference System Serial Number  NVRAM         M2100629
Local Brick Serial Number       EEPROM        MTC266
Reference Brick Serial Number   NVRAM         MTC266


EEPROM      Product Name    Serial      Part Number           Rev  T/W
----------  --------------  ----------  --------------------  ---  ------
INTERFACE   2U_INT_53       MTC266      030_1809_003          A    00
IO9         no hardware detected
ODYSSEY     no hardware detected
RISER       2U_RISER        MXN240      030_1808_005          A    00
NODE        IP53_4CPU       MTA286      030_1868_001          C    00

EEPROM     JEDEC-SPD Info           Part Number        Rev Speed  SGI
---------- ------------------------ ------------------ --- ------ --------
DIMM 0     CE0000000000000026546000 M3 47L6510BT0-CA0  0B   10.0  NO DATA
DIMM 2     CE00000000000000263A6200 M3 47L6510BT0-CA0  0B   10.0  NO DATA
DIMM 4     CE0000000000000026396200 M3 47L6510BT0-CA0  0B   10.0  NO DATA
DIMM 6     CE00000000000000263C6200 M3 47L6510BT0-CA0  0B   10.0  NO DATA
DIMM 1     CE0000000000000026EA6100 M3 47L6510BT0-CA0  0B   10.0  NO DATA
DIMM 3     CE0000000000000026E96100 M3 47L6510BT0-CA0  0B   10.0  NO DATA
DIMM 5     CE0000000000000026F56100 M3 47L6510BT0-CA0  0B   10.0  NO DATA
DIMM 7     CE0000000000000026416200 M3 47L6510BT0-CA0  0B   10.0  NO DATA

# l1cmd --scdev /hw/module/001c04/L1/controller serial all

Data                            Location      Value
------------------------------  ------------  --------
Local System Serial Number      NVRAM         M2100629
Reference System Serial Number  NVRAM         M2100629
Local Brick Serial Number       EEPROM        MTC253
Reference Brick Serial Number   NVRAM         MTC253


EEPROM      Product Name    Serial      Part Number           Rev  T/W
----------  --------------  ----------  --------------------  ---  ------
INTERFACE   2U_INT_53       MTC253      030_1809_003          A    00
IO9         no hardware detected
ODYSSEY     no hardware detected
RISER       2U_RISER        MXN222      030_1808_005          A    00
NODE        IP53_4CPU       MTA290      030_1868_001          C    00

EEPROM     JEDEC-SPD Info           Part Number        Rev Speed  SGI
---------- ------------------------ ------------------ --- ------ --------
DIMM 0     CE000000000000002688D000 M3 47L6510BT0-CA0  0B   10.0  NO DATA
DIMM 2     CE0000000000000027A1E500 M3 47L6510BT0-CA0  0B   10.0  NO DATA
DIMM 4     CE0000000000000026646200 M3 47L6510BT0-CA0  0B   10.0  NO DATA
DIMM 6     CE00000000000000265C6200 M3 47L6510BT0-CA0  0B   10.0  NO DATA
DIMM 1     CE000000000000002686D000 M3 47L6510BT0-CA0  0B   10.0  NO DATA
DIMM 3     CE0000000000000026A0D000 M3 47L6510BT0-CA0  0B   10.0  NO DATA
DIMM 5     CE0000000000000026526200 M3 47L6510BT0-CA0  0B   10.0  NO DATA
DIMM 7     CE0000000000000026546200 M3 47L6510BT0-CA0  0B   10.0  NO DATA

[img]
Attachment:
IMGP9107.JPG
[/img]


Attachments:
File comment: And a picture
IMGP9107.JPG
IMGP9107.JPG [ 1.35 MiB | Viewed 421 times ]

_________________
Current inventory: :O2: :1600SW: :1600SW: :Octane2: :Tezro: :Onyx2:
Former members: :PI: :Indigo: :Indy: :Indigo2: :Indigo2IMP: :Octane: :Octane: :Octane: :Octane: :Fuel: :PrismDT: :Onyx2: :Onyx2: :O200: :O2000: :O3200: :O3x04R:


Last edited by rusti on Fri Dec 17, 2010 11:38 am, edited 1 time in total.
Top
 Profile  
 
recondas
Unread postPosted: Thu Dec 16, 2010 1:08 pm 
Offline
Moderator
Moderator
User avatar

Joined: Sun Jun 06, 2004 4:55 pm
Posts: 4899
Location: NC - USA
Very nice!


All you need now is four Fuel V12s <or even V10s> and a Graphics Compositor - there's more than enough room left in your short rack. :wink:

_________________
***********************************************************************
Welcome to ARMLand - 0/0x0d00
running...(sherwood-root 0607201829)
* InfiniteReality/Reality Software, IRIX 6.5 Release *
***********************************************************************
Top
 Profile  
 
rusti
Unread postPosted: Thu Dec 16, 2010 1:22 pm 
Offline
User avatar

Joined: Sun Nov 29, 2009 2:20 am
Posts: 174
Location: Brussels, Belgium
The somewhat sad story is that I slaughtered my Origin3200 to free up the rack :( . Since I did not find someone to help me fix the I-Brick, I decided to replace the Origin3200 with this Origin350. It has more and faster CPUs while using less space. I used some of the 3200 RAM to "max out" (I know there is 1GB RAMs) the Origin350.

So if anyone is looking for Origin 3x00 spare parts...

I should probably list what I have in the bazar.

Regarding your V12 input: I think I will consider this machine the server and use my Tezro if I want graphics. I wonder though if I should replace the Tezro nodeboard (2 x 700) with one of the Origin350 ones. The Origin would still have 14 CPUs but the Tezro would have 4. I do have some nodelocked licenses on the Tezro and I wonder if changing the nodeboard will break them.

_________________
Current inventory: :O2: :1600SW: :1600SW: :Octane2: :Tezro: :Onyx2:
Former members: :PI: :Indigo: :Indy: :Indigo2: :Indigo2IMP: :Octane: :Octane: :Octane: :Octane: :Fuel: :PrismDT: :Onyx2: :Onyx2: :O200: :O2000: :O3200: :O3x04R:
Top
 Profile  
 
rusti
Unread postPosted: Thu Dec 16, 2010 1:25 pm 
Offline
User avatar

Joined: Sun Nov 29, 2009 2:20 am
Posts: 174
Location: Brussels, Belgium
Ooops I almost forgot:

Thank you ramq for another excellent packing job. It is a pleasure buying stuff from you. And thanks also for including all these nice little gifts! Now I have SGI branded T-Shirts, Lanyards, USB Sticks, Cups, Posters, ...

A collector's dream.

_________________
Current inventory: :O2: :1600SW: :1600SW: :Octane2: :Tezro: :Onyx2:
Former members: :PI: :Indigo: :Indy: :Indigo2: :Indigo2IMP: :Octane: :Octane: :Octane: :Octane: :Fuel: :PrismDT: :Onyx2: :Onyx2: :O200: :O2000: :O3200: :O3x04R:
Top
 Profile  
 
recondas
Unread postPosted: Thu Dec 16, 2010 2:46 pm 
Offline
Moderator
Moderator
User avatar

Joined: Sun Jun 06, 2004 4:55 pm
Posts: 4899
Location: NC - USA
rusti wrote:
I do have some nodelocked licenses on the Tezro and I wonder if changing the nodeboard will break them.

I don't have any experience with node board swaps in a Tezro, or what effects that might have on node locked licenses.

I have swapped an O350 from a 2x600 to a 4x700, and that process was transparent as far as both the system serial number and lmhostid were concerned.

_________________
***********************************************************************
Welcome to ARMLand - 0/0x0d00
running...(sherwood-root 0607201829)
* InfiniteReality/Reality Software, IRIX 6.5 Release *
***********************************************************************
Top
 Profile  
 
ramq
Unread postPosted: Fri Dec 17, 2010 12:34 am 
Offline

Joined: Fri Jan 25, 2008 6:06 am
Posts: 751
Location: Sweden
rusti wrote:
Thank you ramq for another excellent packing job. It is a pleasure buying stuff from you. And thanks also for including all these nice little gifts! Now I have SGI branded T-Shirts, Lanyards, USB Sticks, Cups, Posters, ... A collector's dream.

Thank you, Frank. ;)

Lucky I found all those shipping boxes from actual 1U and 2U rackmounted servers that did the job nicely. Without those I would have a hard time shipping them and would probably put the equipment in risk and add further delay.

Actually I was looking at this huge pile of giveaways and thought 'naah... what the heck' and thought someone else would be more proud of them than me. Putting these items on eBay is a lot more effort than its worth, really. (Still got some original SGI paintings that either needs a spot on a wall somewhere, or they'll end up in a for sale/trade section somewhere.)

As for your O3xxx stuff, I do need front plastic parts especially from the I-brick. Perhaps you have these?
This picture reveals there's missing surrounding plastics covering the L1 display and both sides of the CDROM.
Since you have an O3200 you probably don't have an R-brick to spare... :?

_________________
:O3200: :Fuel: :Indy: :O3x02L:
Top
 Profile  
 
jan-jaap
Unread postPosted: Fri Dec 17, 2010 12:45 am 
Offline
User avatar

Joined: Thu Jun 17, 2004 10:35 am
Posts: 3578
Location: Wijchen, The Netherlands
Nice :D

But 4xR16k700? Surely you mean 16xR16k700 or 4x4xR16k700 :lol:

Oh, and are you breaking that 3200 apart? Maybe I want the L2 (or are you using it with the O350 now?)

_________________
Now this is a deep dark secret, so everybody keep it quiet :)
It turns out that when reset, the WD33C93 defaults to a SCSI ID of 0, and it was simpler to leave it that way... -- Dave Olson, in comp.sys.sgi
Currently in commercial service: Image :Onyx2:(2x) :O3x02L:
In the museum: almost every MIPS/IRIX system.
Wanted: GM1 board for Professional Series GT graphics (030-0076-003, 030-0076-004)
Top
 Profile  
 
ramq
Unread postPosted: Fri Dec 17, 2010 1:05 am 
Offline

Joined: Fri Jan 25, 2008 6:06 am
Posts: 751
Location: Sweden
I didn't know anyone was looking for L2:s nowadays... (I had one for sale some months ago which only Recondas responded to)

_________________
:O3200: :Fuel: :Indy: :O3x02L:
Top
 Profile  
 
rusti
Unread postPosted: Fri Dec 17, 2010 6:31 am 
Offline
User avatar

Joined: Sun Nov 29, 2009 2:20 am
Posts: 174
Location: Brussels, Belgium
Yes, I actually think I will give up on the 3200. Which is a pretty sad because she looked good in that rack and apart from the voltage problem (which may have been a false alarm) she was running nicely. But the 350s give more bang and take less space.

Maybe I should make a new thread in the Bazar for breaking up the 3200 instead of spamming the hinv thread.

The 3200 had no R-Brick (only 1 I-Brick and 2 C-Bricks, so no need for an R-Brick) and no L2 (L2 is only optional for the 3200). Sorry.

@jan-jaap: What I meant was 4 x 700 for my desktop Tezro instead of the 2 x 700 she has right now. I did not mean to convert the Origin350 to an Onyx350 or Tezro.

@ramq: PM sent.

_________________
Current inventory: :O2: :1600SW: :1600SW: :Octane2: :Tezro: :Onyx2:
Former members: :PI: :Indigo: :Indy: :Indigo2: :Indigo2IMP: :Octane: :Octane: :Octane: :Octane: :Fuel: :PrismDT: :Onyx2: :Onyx2: :O200: :O2000: :O3200: :O3x04R:
Top
 Profile  
 
jan-jaap
Unread postPosted: Fri Dec 17, 2010 7:17 am 
Offline
User avatar

Joined: Thu Jun 17, 2004 10:35 am
Posts: 3578
Location: Wijchen, The Netherlands
rusti wrote:
@jan-jaap: What I meant was 4 x 700 for my desktop Tezro instead of the 2 x 700 she has right now. I did not mean to convert the Origin350 to an Onyx350 or Tezro.

I think we're talking about different things, I was referring to the title of this thread ...

May you use that system as much as I use mine. On mine the PID count increments by ~ 0.5 million a day so you could say it's seeing some action :)

_________________
Now this is a deep dark secret, so everybody keep it quiet :)
It turns out that when reset, the WD33C93 defaults to a SCSI ID of 0, and it was simpler to leave it that way... -- Dave Olson, in comp.sys.sgi
Currently in commercial service: Image :Onyx2:(2x) :O3x02L:
In the museum: almost every MIPS/IRIX system.
Wanted: GM1 board for Professional Series GT graphics (030-0076-003, 030-0076-004)
Top
 Profile  
 
rusti
Unread postPosted: Fri Dec 17, 2010 11:41 am 
Offline
User avatar

Joined: Sun Nov 29, 2009 2:20 am
Posts: 174
Location: Brussels, Belgium
jan-jaap wrote:
I think we're talking about different things, I was referring to the title of this thread ...

Bollocks. You are so absolutely right... fixed.
Quote:
May you use that system as much as I use mine. On mine the PID count increments by ~ 0.5 million a day so you could say it's seeing some action :)

I collect these things. I don't use them. (Dodging objects being thrown at me). Maybe you can PM me with some nice ideas what to do on that machine.

_________________
Current inventory: :O2: :1600SW: :1600SW: :Octane2: :Tezro: :Onyx2:
Former members: :PI: :Indigo: :Indy: :Indigo2: :Indigo2IMP: :Octane: :Octane: :Octane: :Octane: :Fuel: :PrismDT: :Onyx2: :Onyx2: :O200: :O2000: :O3200: :O3x04R:
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 

Board index » SGI » SGI: hinv

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group