Nekochan Net

Official Chat Channel: #nekochan // irc.nekochan.net
It is currently Thu Oct 30, 2014 11:16 pm

All times are UTC - 8 hours [ DST ]


Forum rules


Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.



Post new topic Reply to topic  [ 11 posts ] 
Author Message
 Post subject: Fuel R14000 500MHz, 1GB
Unread postPosted: Thu Jan 14, 2010 2:20 pm 
Offline

Joined: Wed Nov 11, 2009 1:02 pm
Posts: 25
Location: Sweden, Uppsala
My first SGI computer. :D
Got it up and running thanks to great help from Ian Mapleson, thank you.


Code:
 fuel 3# hinv -mv
Location: /hw/module/001c01/node
            IP34 Board: barcode MMN567     part 030-1707-003 rev -H
Location: /hw/module/001c01/node/cpubus/0
        IP34PIMM Board: barcode MMR544     part 030-1708-002 rev -H
Location: /hw/module/001c01/Ibrick/xtalk/13
         ASTODYB Board: barcode MPF954     part 030-1725-001 rev -F
Location: /hw/module/001c01/Ibrick/xtalk/14
            IP34 Board: barcode MMN567     part 030-1707-003 rev -H
Location: /hw/module/001c01/Ibrick/xtalk/15
            IP34 Board: barcode MMN567     part 030-1707-003 rev -H
1 500 MHZ IP35 Processor
CPU: MIPS R14000 Processor Chip Revision: 2.3
FPU: MIPS R14010 Floating Point Chip Revision: 2.3
CPU 0 at Module 001c01/Slot 0/Slice A: 500 Mhz MIPS R14000 Processor Chip (enabled)
  Processor revision: 2.3. Scache: Size 2 MB Speed 250 Mhz  Tap 0x1a
Main memory size: 1024 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Memory at Module 001c01/Slot 0: 1024 MB (enabled)
  Bank 0 contains 256 MB (Standard) DIMMS (enabled)
  Bank 1 contains 256 MB (Standard) DIMMS (enabled)
  Bank 2 contains 256 MB (Standard) DIMMS (enabled)
  Bank 3 contains 256 MB (Standard) DIMMS (enabled)
Integral SCSI controller 0: Version QL12160, low voltage differential
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL12160, low voltage differential
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: V10
Integral Fast Ethernet: ef0, version 1, module 001c01, pci 4
  PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 4
  PCI Adapter ID (vendor 0x11c1, device 0x5802) PCI slot 5
HUB in Module 001c01/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
IP35prom in Module 001c01/Slot n0: Revision 6.124
USB controller: type OHCI
fuel 4#




Best regards,
/Christer


Top
 Profile  
 
Unread postPosted: Thu Jan 14, 2010 2:53 pm 
Offline

Joined: Fri Jan 25, 2008 7:06 am
Posts: 768
Location: Sweden
Hi, and welcome to the club.
I see you haven't typed in your location yet, so we can't say for sure if there's forum friends close to you or in the same country.

_________________
:O3200: :Fuel: :Indy: :O3x02L:


Top
 Profile  
 
Unread postPosted: Fri Jan 15, 2010 1:36 am 
Offline

Joined: Wed Nov 11, 2009 1:02 pm
Posts: 25
Location: Sweden, Uppsala
Thank you!

I am located in Uppsala, Sweden.

Need to update my info.

Best regards,
/Christer


Top
 Profile  
 
Unread postPosted: Fri Jan 15, 2010 10:14 am 
Offline
User avatar

Joined: Thu Dec 31, 2009 5:20 am
Posts: 296
Location: Bålsta, Sweden
agkbill wrote:
Thank you!

I am located in Uppsala, Sweden.

Need to update my info.

Best regards,
/Christer

Ops, then you actually have a friend close by in Bålsta about 50km SW, and that strange guy have a much poorer Indigo2 and a Origin200, and some 20 Suns ...

_________________
--
No Microsoft product was used in any way to write or send this text.
If you use a Microsoft product to read it, you're doing so at your own
risk.


Top
 Profile  
 
Unread postPosted: Fri Jan 15, 2010 3:08 pm 
Offline

Joined: Fri Jan 25, 2008 7:06 am
Posts: 768
Location: Sweden
Uppsala? Well, välkommen till SGI-klubben. ;)

_________________
:O3200: :Fuel: :Indy: :O3x02L:


Top
 Profile  
 
Unread postPosted: Fri Jan 15, 2010 3:27 pm 
Offline
User avatar

Joined: Thu Dec 31, 2009 5:20 am
Posts: 296
Location: Bålsta, Sweden
3 stycken från Svedala :)

_________________
--
No Microsoft product was used in any way to write or send this text.
If you use a Microsoft product to read it, you're doing so at your own
risk.


Top
 Profile  
 
Unread postPosted: Fri Jan 15, 2010 5:42 pm 
Offline

Joined: Fri Jan 25, 2008 7:06 am
Posts: 768
Location: Sweden
There's more - Tesla, deBug, bjornl, Pontus and sgtprobe too. I've probably missed someone.
Pontus, btw, is also from Uppsala.

_________________
:O3200: :Fuel: :Indy: :O3x02L:


Top
 Profile  
 
Unread postPosted: Sat Jan 16, 2010 4:08 am 
Offline

Joined: Wed Nov 11, 2009 1:02 pm
Posts: 25
Location: Sweden, Uppsala
:) Wow, great to see that there are more Swedes here.

It sure is cool machines, now I "just" have to find out how to compile from source code on these. I would like to get a never version of Puredate (www.puredata.info) together with the OpenGL add on GEM up and running on my fuel.

But until then I will first change the fans, have successfully changed powersupply and CPU 120MM fans, now it is time for thous noisy 60MM fans :)

All the best!

/Christer


Top
 Profile  
 
Unread postPosted: Sat Jan 16, 2010 6:20 am 
Offline

Joined: Fri Jan 25, 2008 7:06 am
Posts: 768
Location: Sweden
I've replaced all but the PCI-fan (didn't make much noise) and the Power Supply fan - which sounds like a jet taking off after just a few minutes of runtime.

What fan did you replace the PSU fan with? Model? Manufacturer?
(Did you have to circumvent enviromental monitoring or did it work anyway?)

_________________
:O3200: :Fuel: :Indy: :O3x02L:


Top
 Profile  
 
Unread postPosted: Sat Jan 16, 2010 7:11 am 
Offline

Joined: Wed Nov 11, 2009 1:02 pm
Posts: 25
Location: Sweden, Uppsala
The powersupply fan I replaced with a akasa FT-35A.

It is a two pinn fan with thermal sensor.

1200-2600 RPM
18-30,5 dB(A)
15,84-35,32 CFM

Works great in the powersupply due to the built in RPM regulation. I have not disabled the fuel enviroment monitoring.

I can rally recomend this fan for powersupply.

/Christrer


Top
 Profile  
 
Unread postPosted: Tue Nov 23, 2010 1:59 am 
Offline

Joined: Thu May 08, 2008 12:12 pm
Posts: 572
Location: Uppsala, Sweden
Hi, welcome and Nice Machine!

Whereabouts in Uppsala are you? I live in Storvreta, but work "downtown".

mila wrote:
Ops, then you actually have a friend close by in Bålsta about 50km SW, and that strange guy have a much poorer Indigo2 and a Origin200, and some 20 Suns...

What strange guy? Not me I hope, I gave away all my suns you know :)

_________________
:Onyx2R: :IRIS3130: :Onyx2: :O2000: :O200: :PI: :Fuel: :Indigo: :Octane: :O2: :Indigo2IMP: :Indigo2: :Indy: :1600SW: :pdp8e:
:BA213: <- MicroVAX 3500 :BA213: <- DECsystem 5500 :BA215: <- MicroVAX 3300
Pictures of my collection: www.pdp8.se


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group