Nekochan Net

Official Chat Channel: #nekochan // irc.nekochan.net
It is currently Tue Oct 21, 2014 3:21 am

All times are UTC - 8 hours [ DST ]


Forum rules


Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.



Post new topic Reply to topic  [ 2 posts ] 
Author Message
Unread postPosted: Thu Jun 03, 2010 2:40 am 
Offline
User avatar

Joined: Mon Nov 12, 2007 8:54 pm
Posts: 1317
Location: Berkeley, CA, USA, NA, Earth, Sol
Recently acquired, still exploring. Pretty serviceable little box, but there's more RAM on the way already. And there's this PCI card cage that came in the "spare" chassis... Will have to add pictures another time.
Code:
octane2# hinv -vm
Location: /hw/node
      PM20360MHZ Board: barcode KGL983     part 030-1591-001 rev  A
Location: /hw/node/xtalk/15
            IP30 Board: barcode KKJ530     part 030-1467-001 rev  D
Location: /hw/node/xtalk/15/pci/2
             FP1 Board: barcode MGH323     part 030-0891-003 rev  J
    PWR.SPPLY.ER Board: barcode AAE9070645 part 060-0035-001 rev  C
Location: /hw/node/xtalk/12
           MOT20 Board: barcode HAT084     part 030-1240-003 rev  D
Location: /hw/node/xtalk/11
             EVO Board: barcode GPY486     part 030-1156-999 rev  A
2 360 MHZ IP30 Processors
Heart ASIC: Revision F
CPU: MIPS R12000 Processor Chip Revision: 3.3
FPU: MIPS R12010 Floating Point Chip Revision: 0.0
Main memory size: 1024 Mbytes
Xbow ASIC: Revision 1.4
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
  Tape drive: unit 2 on SCSI controller 0: DAT
  Disk drive: unit 3 on SCSI controller 0 (unit 3)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: EMXI
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3
Personal Video: unit 1, revision 2.0
octane2#


Code:
octane2# ./gfxinfo
Graphics board 0 is "IMPACTSR" graphics.
        Managed (":0.0") 1280x1024
        Product ID 0x3, 2 GEs, 2 REs, 4 TRAMs
        MGRAS revision 4, RA revision 0
        HQ rev B, GE12 rev A, RE4 rev C, PP1 rev H,
        VC3 rev A, CMAP rev E, Heart rev F
        21" monitor (id 0xb)
        Video board present

        Channel 0:
         Origin = (0,0)
         Video Output: 1280 pixels, 1024 lines, 60.00Hz (1280x1024_60)
octane2#


Code:
octane2# uname -R
6.5 6.5.22m
octane2# cc -version
MIPSpro Compilers: Version 7.4.4m
octane2#

_________________
Then? :IRIS3130: ... Now? :O3x02L: :A3504L:- :A3502L: :1600SW:+MLA :Fuel: :Octane2: :Octane: :Indigo2IMP: ... Other: DEC :BA213: :BA123: Sun, DG AViiON, NeXT :Cube:


Top
 Profile  
 
Unread postPosted: Tue Jun 08, 2010 4:00 pm 
Offline
User avatar

Joined: Sun Mar 28, 2010 5:05 am
Posts: 17
Location: Riga, Latvia
A good one! (better then mine):) Mine is only 1x300 Mhz and ESI. (Still hasn't got a camera to take some shots and post a hinv.-)

_________________
:O2: [R5K, 180MHz, 512 Mb] :Octane2: [R12K, 1x300MHz, 1024 Mb, V8]


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group