Nekochan Net

Official Chat Channel: #nekochan // irc.nekochan.net
It is currently Tue Jul 29, 2014 12:42 am

All times are UTC - 8 hours


Forum rules


Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.



Post new topic Reply to topic  [ 92 posts ]  Go to page 1, 2, 3, 4, 5 ... 7  Next
Author Message
Unread postPosted: Sat Nov 21, 2009 5:21 am 
Offline
Moderator
Moderator
User avatar

Joined: Sun Jun 06, 2004 4:55 pm
Posts: 5190
Location: NC - USA
Onyx350 InfinitePerformance Dual-Head:
Code:
# hinv -vm
Location: /hw/module/001c01/node
       IP53_4CPU Board: barcode MZH509     part 030-1868-001 rev -C
Location: /hw/module/001c01/IXbrick/xtalk/12
          ASTODY Board: barcode MLV203     part 030-1726-003 rev -E
Location: /hw/module/001c01/IXbrick/xtalk/15
       2U_INT_53 Board: barcode MYE900     part 030-1809-003 rev -B
Location: /hw/module/001c01/IXbrick/xtalk/15/pci-x/0/1/ioc4
             IO9 Board: barcode MYM430     part 030-1771-005 rev -A
Location: /hw/module/001c02/node
       IP53_4CPU Board: barcode MXL750     part 030-1812-002 rev -C
Location: /hw/module/001c02/IXbrick/xtalk/12
          ASTODY Board: barcode MYA424     part 030-1726-005 rev -A
Location: /hw/module/001c02/IXbrick/xtalk/15
       2U_INT_53 Board: barcode NNX272     part 030-1809-006 rev -B
Location: /hw/module/001c02/IXbrick/xtalk/15/pci-x/0/1/ioc4
             IO9 Board: barcode NLC357     part 030-1771-005 rev -A
8 700 MHZ IP35 Processors
CPU: MIPS R16000 Processor Chip Revision: 2.1
FPU: MIPS R16010 Floating Point Chip Revision: 2.1
CPU 0 at Module 001c01/Slot 0/Slice A: 700 Mhz MIPS R16000 Processor Chip (enabled)
  Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0xc
CPU 1 at Module 001c01/Slot 0/Slice B: 700 Mhz MIPS R16000 Processor Chip (enabled)
  Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0xc
CPU 2 at Module 001c01/Slot 0/Slice C: 700 Mhz MIPS R16000 Processor Chip (enabled)
  Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0xc
CPU 3 at Module 001c01/Slot 0/Slice D: 700 Mhz MIPS R16000 Processor Chip (enabled)
  Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0xc
CPU 4 at Module 001c02/Slot 0/Slice A: 700 Mhz MIPS R16000 Processor Chip (enabled)
  Processor revision: 2.1. Scache: Size 8 MB Speed 350 Mhz  Tap 0xa
CPU 5 at Module 001c02/Slot 0/Slice B: 700 Mhz MIPS R16000 Processor Chip (enabled)
  Processor revision: 2.1. Scache: Size 8 MB Speed 350 Mhz  Tap 0xa
CPU 6 at Module 001c02/Slot 0/Slice C: 700 Mhz MIPS R16000 Processor Chip (enabled)
  Processor revision: 2.1. Scache: Size 8 MB Speed 350 Mhz  Tap 0xa
CPU 7 at Module 001c02/Slot 0/Slice D: 700 Mhz MIPS R16000 Processor Chip (enabled)
  Processor revision: 2.1. Scache: Size 8 MB Speed 350 Mhz  Tap 0xa
Main memory size: 16384 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Secondary unified instruction/data cache size: 4 Mbytes
Secondary unified instruction/data cache size: 4 Mbytes
Secondary unified instruction/data cache size: 4 Mbytes
Secondary unified instruction/data cache size: 8 Mbytes
Secondary unified instruction/data cache size: 8 Mbytes
Secondary unified instruction/data cache size: 8 Mbytes
Secondary unified instruction/data cache size: 8 Mbytes
Memory at Module 001c01/Slot 0: 8192 MB (enabled)
  Bank 0 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 1 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 2 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 3 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 4 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 5 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 6 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 7 contains 1024 MB (Premium) DIMMS (enabled)
Memory at Module 001c02/Slot 0: 8192 MB (enabled)
  Bank 0 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 1 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 2 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 3 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 4 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 5 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 6 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 7 contains 1024 MB (Premium) DIMMS (enabled)
Integral SCSI controller 2: Version IDE (ATA/ATAPI) IOC4
  CDROM: unit 0 on SCSI controller 2
Integral SCSI controller 4: Version IDE (ATA/ATAPI) IOC4
  CDROM: unit 0 on SCSI controller 4
Integral SCSI controller 3: Version SAS/SATA LS1068
  Tape drive: unit 4 on SCSI controller 3: Liner Tape-Open
Integral SCSI controller 0: Version QL12160, low voltage differential
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
  Disk drive: unit 2 on SCSI controller 0 (unit 2)
Integral SCSI controller 1: Version QL12160, low voltage differential
Integral SCSI controller 5: Version QL12160, low voltage differential
Integral SCSI controller 6: Version QL12160, low voltage differential
Integral SCSI controller 7: Version QL12160, low voltage differential
  Disk drive: unit 1 on SCSI controller 7 (unit 1)
  Disk drive: unit 2 on SCSI controller 7 (unit 2)
Integral SCSI controller 8: Version QL12160, low voltage differential
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
IOC3/IOC4 serial port: tty5
IOC3/IOC4 serial port: tty6
IOC3/IOC4 serial port: tty7
IOC3/IOC4 serial port: tty8
IOC3/IOC4 serial port: tty9
IOC3/IOC4 serial port: tty10
Graphics board: V12
Graphics board: V12
Integral Gigabit Ethernet: tg0, module 001c01, PCI bus 1 slot 4
Gigabit Ethernet: tg1, module 001c02, PCI bus 1 slot 4
Gigabit Ethernet: eg0, module 001c02, slot -1, firmware version 12.4.10
Iris Audio Processor: version MAD revision 1, number 1
Iris Audio Processor: version RAD revision 13.0, number 1
  PCI Adapter ID (vendor 0x10a9, device 0x100a) PCI slot 1
  PCI Adapter ID (vendor 0x1000, device 0x0054) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 3
  PCI Adapter ID (vendor 0x14e4, device 0x1645) PCI slot 4
  PCI Adapter ID (vendor 0x10a9, device 0x100a) PCI slot 1
  PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 3
  PCI Adapter ID (vendor 0x14e4, device 0x1645) PCI slot 4
  PCI Adapter ID (vendor 0x1412, device 0x1724) PCI slot 1
  PCI Adapter ID (vendor 0x1033, device 0x0035) PCI slot 2
  PCI Adapter ID (vendor 0x1033, device 0x0035) PCI slot 2
  PCI Adapter ID (vendor 0x1033, device 0x00e0) PCI slot 2
  PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 2
IOC4 firmware revision 83
IOC4 firmware revision 83
IOC3/IOC4 external interrupts: 1
IOC3/IOC4 external interrupts: 2
HUB in Module 001c01/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
HUB in Module 001c02/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
Dual Channel Display
Dual Channel Display
IP35prom in Module 001c01/Slot n0: Revision 6.211
IP35prom in Module 001c02/Slot n0: Revision 6.211
USB controller: type OHCI
USB controller: type OHCI
USB Human Interface Device: device id 0 type mouse
USB Human Interface Device: device id 0 type keyboard
Code:
# /usr/gfx/gfxinfo -vv
Graphics board 0 is "ODYSSEY" graphics.
        Managed (":0.0") 3200x1200
        BUZZ version B.1
        PB&J version 1
        128MB memory
                Banks: 4, CAS latency: 3
         Monitor 0 type: Unknown
        Dual Channel Display option
         Monitor 1 type: VSC 4892        Monitor 2 type: VSC 4892
        Input Sync: Voltage - Video Level; Source - Internal; Genlocked - False
        Channel 0:
         Origin = (0,0)
         Video Output: 1600 pixels, 1200 lines, 60.00Hz (2@1600x1200_60_ds)
         Video Format Flags:  (none)
         Sync Disabled
         Using Gamma Map 0
         Monitor Type:  VSC-4892
         Gain (all color components) - 0.000000 ; range [1,10]
        Channel 1:
         Origin = (1600,0)
         Video Output: 1600 pixels, 1200 lines, 60.00Hz (2@1600x1200_60_ds)
         Video Format Flags:  (none)
         Sync Disabled
         Using Gamma Map 0
         Monitor Type:  VSC-4892
         Gain (all color components) - 0.000000 ; range [1,10]
Graphics board 1 is "ODYSSEY" graphics.
        Managed (":0.1") 3200x1200
        BUZZ version B.2
        PB&J version 1
        128MB memory
                Banks: 4, CAS latency: 3
         Monitor 0 type: Unknown
        Dual Channel Display option
         Monitor 1 type: DEL -24543      Monitor 2 type: SAM 430
        Input Sync: Voltage - Video Level; Source - Internal; Genlocked - False
        Channel 0:
         Origin = (0,0)
         Video Output: 1600 pixels, 1200 lines, 60.00Hz (2@1600x1200_60_ds)
         Video Format Flags:  (none)
         Sync Disabled
         Using Gamma Map 0
         Monitor Type:  DEL-40993
         Gain (all color components) - 0.000000 ; range [1,10]
        Channel 1:
         Origin = (1600,0)
         Video Output: 1600 pixels, 1200 lines, 60.00Hz (2@1600x1200_60_ds)
         Video Format Flags:  (none)
         Sync Disabled
         Using Gamma Map 0
         Monitor Type:  SAM-430
         Gain (all color components) - 0.000000 ; range [1,10]
Code:
# l2cmd serial all
001c01:

Data                            Location      Value
------------------------------  ------------  --------
Local System Serial Number      NVRAM         M2008888
Reference System Serial Number  Attached L2   M2008888
Local Brick Serial Number       EEPROM        MYE999
Reference Brick Serial Number   NVRAM         MYE999


EEPROM      Product Name    Serial      Part Number           Rev  T/W
----------  --------------  ----------  --------------------  ---  ------
INTERFACE   2U_INT_53       MYE900      030_1809_003          B    00
IO9         IO9             MYM430      030_1771_005          A    00
ODYSSEY     ASTODY          MLV203      030_1726_003          E    00
RISER       2U_RISER        MXC235      030_1808_005          A    00
NODE        IP53_4CPU       MZH509      030_1868_001          C    00
SNOWBALL    no hardware detected
PS 1        no hardware detected
PS 2        DPS-500EBE      XPD0323002193  060-0178-003          S1

EEPROM     JEDEC-SPD Info           Part Number        Rev Speed  SGI
---------- ------------------------ ------------------ --- ------ --------
DIMM 0     7F7FFE000000000012001671 CM2201B            2     8.0  NO DATA
DIMM 2     7F7FFE000000000012001690 CM2201B            2     8.0  NO DATA
DIMM 4     CE000000000000000CF04200 M3 46L2820BT2-CA0  2B   10.0  NO DATA
DIMM 6     CE000000000000000CA94200 M3 46L2820BT2-CA0  2B   10.0  NO DATA
DIMM 1     7F7FFE000000000012001691 CM2201B            2     8.0  NO DATA
DIMM 3     7F7FFE00000000001200168E CM2201B            2     8.0  NO DATA
DIMM 5     CE000000000000000CE64800 M3 46L2820BT2-CA0  2B   10.0  NO DATA
DIMM 7     CE000000000000000C5A4D00 M3 46L2820BT2-CA0  2B   10.0  NO DATA

001c02:

Data                            Location      Value
------------------------------  ------------  --------
Local System Serial Number      NVRAM         M2008888
Reference System Serial Number  Attached L2   M2008888
Local Brick Serial Number       EEPROM        NNX222
Reference Brick Serial Number   NVRAM         NNX222


EEPROM      Product Name    Serial         Part Number           Rev  T/W
----------  --------------  -------------  --------------------  ---  ------
INTERFACE   2U_INT_53       NNX272         030_1809_006          B    00
IO9         IO9             NLC357         030_1771_005          A    00
ODYSSEY     ASTODY          MYA424         030_1726_005          A    00
RISER       2U_RISER        NND054         030_1808_006          B    00
NODE        IP53_4CPU       MXL750         030_1812_002          C    00
SNOWBALL    no hardware detected
PS 1        no hardware detected
PS 2        DPS-500EBE      XPD0451009596  060-0178-003          S4

EEPROM     JEDEC-SPD Info           Part Number        Rev  Speed  SGI
---------- ------------------------ ------------------ ---- ------ --------
DIMM 0     CE000000000000000C6F6F00 M3 46L2820BT2-CA0   2B   10.0  N/A
DIMM 2     CE000000000000000C576F00 M3 46L2820BT2-CA0   2B   10.0  N/A
DIMM 4     CE000000000000000C5B0200 M3 46L2820DT2-CA0   2D   10.0  N/A
DIMM 6     CE000000000000000C620200 M3 46L2820DT2-CA0   2D   10.0  N/A
DIMM 1     CE000000000000000CBD6F00 M3 46L2820BT2-CA0   2B   10.0  N/A
DIMM 3     CE000000000000000C786F00 M3 46L2820BT2-CA0   2B   10.0  N/A
DIMM 5     CE000000000000000C5A0100 M3 46L2820DT2-CA0   2D   10.0  N/A
DIMM 7     CE000000000000000CEB0100 M3 46L2820DT2-CA0   2D   10.0  N/A
Code:
 
#l2cmd env
001c01:
Environmental monitoring is enabled and running.

Description    State       Warning Limits     Fault Limits       Current
-------------- ----------  -----------------  -----------------  -------
          1.8V    Enabled  10%   1.62/  1.98  20%   1.44/  2.16    1.78
           12V   Disabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.12
           12V    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.06
          3.3V    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.32
        12V IO    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.06
        5V aux    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    5.04
      3.3V aux    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.27
        5V aux    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    5.04
          3.3V    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.32
          2.5V    Enabled  10%   2.25/  2.75  20%   2.00/  3.00    2.51
            5V    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    4.94
      3.3V aux   Disabled  10%   2.97/  3.63  20%   2.64/  3.96    3.27
  XIO 12V bias    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.00
        XIO 5V    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    4.94
      XIO 2.5V    Enabled  10%   2.25/  2.75  20%   2.00/  3.00    2.47
  XIO 3.3V aux    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.32
NODE0 3.3V aux    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.27
  NODE0 5V aux    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    5.04
     NODE0 12V    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.00
    NODE0 SRAM    Enabled  10%   2.25/  2.75  20%   2.00/  3.00    2.48
    NODE0 1.5V    Enabled  10%   1.35/  1.65  20%   1.20/  1.80    1.49
     NODE0 CPU    Enabled  10%   1.13/  1.38  20%   1.00/  1.50    1.25

Description    State       Warning RPM  Current RPM
-------------- ----------  -----------  -----------
FAN 0  EXHST 1    Enabled         2160         2370
FAN 1       PS    Enabled         1800         2103
FAN 2    PCI 1    Enabled         2160         2337
FAN 3    PCI 2    Enabled         2160         2569
FAN 4      ODY    Enabled         1679         4371

                           Advisory   Critical   Fault      Current
Description    State       Temp       Temp       Temp       Temp   
-------------- ----------  ---------  ---------  ---------  ---------
INTERFACE 0       Enabled  Disabled  Disabled   75C/167F   46C/114F
INTERFACE 1       Enabled  Disabled  Disabled   75C/167F   45C/113F
INTERFACE 2       Enabled  Disabled  Disabled   75C/167F   33C/ 91F
PCI RISER         Enabled  Disabled  Disabled   75C/167F   32C/ 89F
ODYSSEY           Enabled  Disabled  Disabled   75C/167F   38C/100F
NODE              Enabled  Disabled  Disabled   75C/167F   29C/ 84F
BEDROCK           Enabled  Disabled  Disabled   75C/167F   46C/114F

001c02:
Environmental monitoring is enabled and running.

Description    State       Warning Limits     Fault Limits       Current
-------------- ----------  -----------------  -----------------  -------
          1.8V    Enabled  10%   1.62/  1.98  20%   1.44/  2.16    1.777
           12V <not present>
        12V #2    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.000
          3.3V    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.320
        12V IO    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.063
        5V AUX    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    5.044
      3.3V AUX    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.268
    PCI 5V AUX    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    5.044
      PCI 3.3V    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.320
      PCI 2.5V    Enabled  10%   2.25/  2.75  20%   2.00/  3.00    2.496
        PCI 5V    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    4.940
  XIO 12V bias    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.00
        XIO 5V    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    4.94
      XIO 2.5V    Enabled  10%   2.25/  2.75  20%   2.00/  3.00    2.47
  XIO 3.3V aux    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.32
 IP53 3.3V AUX     Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.268
   IP53 5V AUX    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    5.044
      IP53 12V    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.000
     IP53 VCPU    Enabled  10%   1.13/  1.38  20%   1.00/  1.50    1.241
     IP53 SRAM    Enabled  10%   2.25/  2.75  20%   2.00/  3.00    2.470
     IP53 1.5V    Enabled  10%   1.35/  1.65  20%   1.20/  1.80    1.495

Description     State       Warning RPM  Current RPM
--------------- ----------  -----------  -----------
FAN  0  EXHST 1    Enabled         1980         2177
FAN  1  EXHST 2    Enabled         1980         2177
FAN  2       PS    Enabled         3200         4066
FAN  3    PCI 1    Enabled         1980         2616
FAN  4      ODY    Enabled         1679         4371

                              Advisory   Critical   Fault      Current     
Description       State       Temp       Temp       Temp       Temp       
----------------- ----------  ---------  ---------  ---------  --------- 
 0 INTERFACE 0       Enabled   31C/ 87F   48C/118F   55C/131F   15C/ 59F
 1 INTERFACE 1       Enabled   31C/ 87F   48C/118F   55C/131F   17C/ 62F
 2 INTERFACE 2       Enabled   31C/ 87F   48C/118F   55C/131F   18C/ 64F
 3 PCI RISER         Enabled   31C/ 87F   48C/118F   55C/131F   18C/ 64F
 4 ODYSSEY           Enabled   31C/ 87F   48C/118F   75C/167F   38C/100F
 5 NODE              Enabled   31C/ 87F   48C/118F   55C/131F   15C/ 59F
 6 BEDROCK           Enabled   31C/ 87F   48C/118F   55C/131F   16C/ 60F
Code:
mt status
        Controller: SCSI
        Device: IBM: ULTRIUM-HH4     B6W1
        Status: 0x20262
        Drive type: Linear Tape-Open
        Media : READY, writable, at BOT
Code:
l2cmd pci
001c01:
Bus Slot Slot Stat Bus Stat  Power Mode/Speed
--- ---- --------- --------- ----- ----------
  1    1 0x80 0x01      0x44   15W PCI  66MHz
  1    2 0xad 0x0c      0x44  7.5W PCI  66MHz
  2    1 0x40 0x00      0x40  7.5W PCI  33MHz
  2    2 0x44 0x01      0x40   15W PCI  33MHz
001c02:
Bus Slot Slot Stat Power  Mode/Speed
--- ---- --------- ----- -----------
  1    1 0x80 0x01   15W PCI   66MHz
  1    2 0x80 0x01   15W PCI   66MHz
  2    1 0x00 0x0f  none PCI   33MHz
  2    2 0x00 0x00  7.5W PCI   33MHz
Code:
# l2cmd l1 ver
001c01:
L1 1.48.1 (Image A), Built 01/22/2007 11:34:34    [MIPS 2MB image]
001c02:
L1 1.48.1 (Image A), Built 01/22/2007 11:34:34    [MIPS 2MB image]
# l2cmd ver
L2 version: 1.48.0
...and the PROM Power-On Diagnostics info:
Code:
Starting PROM Boot process
Starting PROM Boot process

IP35 PROM SGI Version 6.210  built 02:33:51 PM Aug 26, 2004
IP35 PROM SGI Version 6.210  built 02:33:51 PM Aug 26, 2004
Testing/Initializing memory ...............             DONE
Testing/Initializing memory ...............             DONE
Copying PROM code to memory ...............             DONE
Copying PROM code to memory ...............             DONE
Discovering local IO ......................             DONE
Discovering NUMAlink connectivity .........             DONE
Found 2 objects (2 hubs, 0 routers) in 7125 usec
Waiting for peers to complete discovery....             DONE           
Discovering local IO ......................             DONE
Discovering NUMAlink connectivity .........             DONE
Found 2 objects (2 hubs, 0 routers) in 7125 usec
Waiting for peers to complete discovery....             DONE
Global master is /hw/rack/001/bay/01.......             DONE
Global master is /hw/rack/001/bay/01.......             DONE
Intializing any CPUless nodes..............             DONE
Checking partitioning information .........             DONE
Checking partitioning information .........             DONE
Local slave entering slave loop
Loading BASEIO prom .......................             DONE

BASEIO PROM Monitor SGI Version 6.210  built 02:30:38 PM Aug 26, 2004 (BE64)
8 CPUs on 2 nodes found.
Automatic update of PROM environment disabled
Graphics diagnostics

Odyssey board #0 found on nasid 0
Running Odyssey xtalk sanity diag...
        Board version 1 - Buzz revision 2B
        On board sdram size: 128 Mb
        Cas latency: CAS 3
        4 banks by sdram module
Running Odyssey Buzz registers diag...
Device passed diagnostics

Odyssey board #1 found on nasid 1
Running Odyssey xtalk sanity diag...
        Board version 1 - Buzz revision 3B
        On board sdram size: 128 Mb
        Cas latency: CAS 3
        4 banks by sdram module
Running Odyssey Buzz registers diag...
Device passed diagnostics

Installing PROM Device drivers ............
On-board (IO9) tigon3 1000BaseT interface
Base I/O Ethernet set to /dev/ethernet/tg0
Installing Graphics Console...
graphics install: searching for pipe 0
Probing IOC4 ATA adapter 2
IOC4 RevId = 83
Detected Vendor id/Product MATSHITA DVD-ROM SR-8177

Walking SCSI Adapter 0, (pci id 3)
1+ Device Vendor Product: SEAGATE ST336753LC
2+ Device Vendor Product: SEAGATE ST336753LC
3- 4- 5- 6- 7- 8- 9- 10- 11- 12- 13- 14- 15- = 2 device(s)


Walking SCSI Adapter 1, (pci id 3)
1- 2- 3- 4- 5- 6- 7- 8- 9- 10- 11- 12- 13- 14- 15- = 0 device(s)

Initializing PROM Device drivers ..........
  Initializing Base I/O Ethernet Interface...Done.
  ---------------Interface Configuration Summary----------------
  ASIC|Revision|MAC Address       : 5701|B5|08:00:69:13:e7:48
  Link Negotiation|Advertisement  : On|<H10 F10 H100 F100 H1000 F1000>
  Link|Speed|Duplex|Rx/Tx FlowCtrl: Up|1000|Full|Off/Off
  --------------------------------------------------------------
Attachment:
8x700Mhz.jpg
8x700Mhz.jpg [ 83.5 KiB | Viewed 2130 times ]


Attachments:
File comment: The SGI logo on the Compositor is illuminated by a blue LED.
SGC_1a.jpg
SGC_1a.jpg [ 266.88 KiB | Viewed 2113 times ]

_________________
***********************************************************************
Welcome to ARMLand - 0/0x0d00
running...(sherwood-root 0607201829)
* InfiniteReality/Reality Software, IRIX 6.5 Release *
***********************************************************************
Top
 Profile  
 
Unread postPosted: Sat Nov 21, 2009 6:05 am 
Offline
User avatar

Joined: Wed Mar 26, 2008 11:04 am
Posts: 314
Location: Paris
Very nice !
Do you have any plans to convert the Origin, to get a dual channel setup ?

_________________
:Onyx2: :O2: :O3x0: :O3x0:


Top
 Profile  
 
Unread postPosted: Sat Nov 21, 2009 12:57 pm 
Offline
Moderator
Moderator
User avatar

Joined: Sun Jun 06, 2004 4:55 pm
Posts: 5190
Location: NC - USA
bplaa.yai wrote:
Very nice !
Thanks!
bplaa.yai wrote:
Do you have any plans to convert the Origin, to get a dual channel setup ?

I'm watching for a reasonably priced V12, but in the meantime I have a V10 standing by for installation. :D

_________________
***********************************************************************
Welcome to ARMLand - 0/0x0d00
running...(sherwood-root 0607201829)
* InfiniteReality/Reality Software, IRIX 6.5 Release *
***********************************************************************


Top
 Profile  
 
Unread postPosted: Sun Nov 22, 2009 9:01 pm 
Offline
User avatar

Joined: Mon Apr 14, 2003 3:34 am
Posts: 5096
that's the big plus compared to a tezro. you can expand the o350s just like that :D

_________________
r-a-c.de


Top
 Profile  
 
Unread postPosted: Mon Oct 25, 2010 12:40 pm 
Offline
Moderator
Moderator
User avatar

Joined: Sun Jun 06, 2004 4:55 pm
Posts: 5190
Location: NC - USA
Added a Graphics Compositor to the system.
Code:
 /usr/gfx/gfxinfo -vv
Graphics board 0 is "ODYSSEY" graphics.
        Managed (":0.0") 1920x1200
        BUZZ version B.1
        PB&J version 1
        128MB memory
                Banks: 4, CAS latency: 3
        USB Compositor -1 port 0 attached to channel 0 nic 0x1004a768
         CMP:  NIC #:      4e52.5631.3539 (family: ff)
               Serial #:   NRV159
               Part #:     030_1857_002
               rev_code:   0000
               grp_code:   0xff
               capability: "0000"
               variety:    0xff
               name:       cbob   
    Monitor 0 type: DEL -24553
        Input Sync: Voltage - Video Level; Source - Internal; Genlocked - True
        Channel 0:
         Origin = (0,0)
         Video Output: 1920 pixels, 1200 lines, 60.02Hz (1920x1200_60)
    Video Format Flags:  (none)
         Sync Disabled
         Using Gamma Map 0
         Monitor Type:  unknown
         Gain (all color components) - 0.000000 ; range [1,10]

TechPubs wrote:
Product Description -The compositor is a hardware graphics compositor that can receive two, three, or four digital video inputs, and then combine them into a single video output to increase graphics performance. Each input is from one pipe residing in an SGI graphics device such as a Silicon Graphics Prism XG2N module, Silicon Graphics Prism Deskside system (with Image Sync installed), Silicon Graphics UltimateVision Onyx4 G2/G2N, SGI Onyx 350 compute/graphics module, or an SGI 3000 series V-brick. The video output can display on digital and analog monitors at the same time.

General Capabilities - The compositor can perform spatial compositions, pixel averaging, and stereo rendering. The compositor receives two to four input signals and outputs a single signal either in analog or digital format. The following items are noteworthy regarding the compositor's capabilities:

    A selectable pixel-averaging feature (antialiasing) combines the inputs from two or four graphics pipes into the compositor and averages these inputs to smooth jagged edges on displayed images.

    For every output pixel, the compositor averages all values from all the pipes. Among other things, this provides applications with the means to do full-scene antialiasing (FSAA) in hardware.

    A spatial composition/tiling feature enables each pipe connected to the compositor to render a predefined portion of the display.

    DB-9 stereo sync port connector connects to an emitter to provide stereo effect for LCD shutter glasses. This stereo function has one pipe providing images for the left and right eyes in alternating framebuffers. You can also select a Stereo mode through the Initial Tiling Mode field so that one graphics pipe provides 24-bit images for the left eye and another pipe provides images for the right eye in alternating frames to enhance viewing performance.

    One advanced csync connector and a GENLOCK 1 connector connect with the genlock connectors on the graphics pipes to synchronize the video refresh of the compositor output with the graphics pipes. These connections enable the compositor to receive an external sync signal, which locks the timing of the output video picture.

    One swap ready port connector synchronizes the compositor buffer swaps to the graphics pipe buffer swaps.

    With InfinitePerformance graphics, there are four swap ready port connectors labeled IP SWAP READY 0, 1, 2, and 3 connect to the corresponding swap ready connector on the InfinitePerformance pipes 0, 1, 2, and 3. These connections synchronize the compositor buffer swaps to the InfinitePerformance graphics pipe buffer swaps.

    Stereo is supported only for analog output.
    When Xinerama is used to overlap screen regions on an edge-blended display or compositor-based system, the cursor will seem to disappear when it enters the overlapped or uncomposited regions of the display.

    By upgrading to IRIX 6.5.20 or later, you can use an X server feature that prevents the cursor from disappearing in these cases. It causes additional cursor images (not real cursors) to appear on all pipes contributing to the overlapped regions. To enable this feature, add the –phantomcursors flag to the X server command line in the /var/X11/xdm/Xservers file. For more information about the –phantomcursors option, see the Xsgi(1) man page.


Now the hunt for another Fuel V12 begins.....


Attachments:
SGC_2a.jpg
SGC_2a.jpg [ 326.83 KiB | Viewed 2110 times ]

_________________
***********************************************************************
Welcome to ARMLand - 0/0x0d00
running...(sherwood-root 0607201829)
* InfiniteReality/Reality Software, IRIX 6.5 Release *
***********************************************************************
Top
 Profile  
 
Unread postPosted: Mon Oct 25, 2010 12:44 pm 
Offline
Site Admin
Site Admin
User avatar

Joined: Thu Jan 23, 2003 1:31 am
Posts: 7970
Location: Pleasanton, California
Any pics of the SGC? I've never run across one of those.

_________________
Twitter: @neko_no_ko
IRIX Release 4.0.5 IP12 Version 06151813 System V
Copyright 1987-1992 Silicon Graphics, Inc.
All Rights Reserved.


Top
 Profile  
 
Unread postPosted: Mon Oct 25, 2010 12:46 pm 
Offline
Moderator
Moderator
User avatar

Joined: Sun Jun 06, 2004 4:55 pm
Posts: 5190
Location: NC - USA
nekonoko wrote:
Any pics of the SGC? I've never run across one of those.

I just added a few - one to the original hinv post, and one to the newer post. The Graphics Compositor looks kind of nice when powered up. The SGI logo is illuminated by blue LEDs.

_________________
***********************************************************************
Welcome to ARMLand - 0/0x0d00
running...(sherwood-root 0607201829)
* InfiniteReality/Reality Software, IRIX 6.5 Release *
***********************************************************************


Top
 Profile  
 
Unread postPosted: Mon Oct 25, 2010 12:49 pm 
Offline
Site Admin
Site Admin
User avatar

Joined: Thu Jan 23, 2003 1:31 am
Posts: 7970
Location: Pleasanton, California
Ah, thanks! Looks a lot like the DMediaPro VBOB from the front.

_________________
Twitter: @neko_no_ko
IRIX Release 4.0.5 IP12 Version 06151813 System V
Copyright 1987-1992 Silicon Graphics, Inc.
All Rights Reserved.


Top
 Profile  
 
Unread postPosted: Mon Oct 25, 2010 12:52 pm 
Offline
Moderator
Moderator
User avatar

Joined: Sun Jun 06, 2004 4:55 pm
Posts: 5190
Location: NC - USA
The do appear very similar. I noticed that it identifies itself as a "cbob" <compositor break out box?> in gfxinfo. Here's a photo of the rear panel and the interior:
Attachment:
SGC_bulkhead.jpg
SGC_bulkhead.jpg [ 122.25 KiB | Viewed 2098 times ]
Attachment:
SGC_Interior.jpg
SGC_Interior.jpg [ 416.95 KiB | Viewed 2098 times ]

_________________
***********************************************************************
Welcome to ARMLand - 0/0x0d00
running...(sherwood-root 0607201829)
* InfiniteReality/Reality Software, IRIX 6.5 Release *
***********************************************************************


Top
 Profile  
 
Unread postPosted: Tue Oct 26, 2010 1:01 am 
Offline

Joined: Fri Jan 25, 2008 6:06 am
Posts: 767
Location: Sweden
You have inconcistent amounts of cache on your CPU-boards. I demand that you immediately send the 8MB boards to me for exchange to standard 4MB variety. ;)

Seriously, that's a very cool piece of hardware.
The possibilites... another two O350 bricks (and NUMAlink brick) with V12 boards and you have 4-to-1 pipe config and a buttload of graphics performance. Yum.

_________________
:O3200: :Fuel: :Indy: :O3x02L:


Top
 Profile  
 
Unread postPosted: Tue Oct 26, 2010 1:32 am 
Offline
User avatar

Joined: Thu Jun 17, 2004 10:35 am
Posts: 3830
Location: Wijchen, The Netherlands
Very interesting!

Unfortunately it seems the output is not a dual link DVI:
Techpubs wrote:
Four DVI single-link digital video inputs with up to 165–MHz pixel clock per input can combine into one digital video output that allows up to 165 MHz of output

So hamei's fantasy of using this to connect to some 3840x2400 display isn't going to happen. It will be interesting to seel how well this device works, and how transparent it is from a software perspective. SGI has a long history of graphics pipe multiplexers (all the way back to the Skywriter cyclops mode), but it always required explicit support from the applications.

_________________
Now this is a deep dark secret, so everybody keep it quiet :)
It turns out that when reset, the WD33C93 defaults to a SCSI ID of 0, and it was simpler to leave it that way... -- Dave Olson, in comp.sys.sgi

Currently in commercial service: Image :Onyx2:(2x) :O3x02L:
In the museum: almost every MIPS/IRIX system.
Wanted: GM1 board for Professional Series GT graphics (030-0076-003, 030-0076-004)


Top
 Profile  
 
Unread postPosted: Tue Oct 26, 2010 3:50 am 
Offline
Moderator
Moderator
User avatar

Joined: Sun Jun 06, 2004 4:55 pm
Posts: 5190
Location: NC - USA
ramq wrote:
You have inconcistent amounts of cache on your CPU-boards. I demand that you immediately send the 8MB boards to me for exchange to standard 4MB variety. ;)
I'll let you know when I get around to packing those up. ;)
ramq wrote:
Seriously, that's a very cool piece of hardware.
The possibilites... another two O350 bricks (and NUMAlink brick) with V12 boards and you have 4-to-1 pipe config and a buttload of graphics performance. Yum.
Thanks! Just like most of us here I suffer from the need for speed, so that thought has crossed my mind more than once. Limiting the set up to two modules does offer one <less powerful> fringe benefit. I can run the two-module set up 24 hours a day year round without having to make any special provision for cooling. That size makes for a everyday IRIX desktop with a more than reasonable amount of power. A single two or four processor O350 with a V10 or V12 would probably be an even better balance of those same factors - until I ran across the compositor I was even considering the idea of moving one O350 to run the Onyx 300 G-Brick, and splitting off <or selling> the 16 processor O300 compute set up.





jan-jaap wrote:
So hamei's fantasy of using this to connect to some 3840x2400 display isn't going to happen.
That would actually be the reverse of how the Compositor works. The compositor takes the output of <up to four> displays and squeezes them into a single display no larger then any one of the four. So instead of creating more resolution, you assign each V12 to smaller section of a standard display and combine their power. BTW, hamei is definitely a fan of the IBM T221, but he was well aware that the Compositor wouldn't be the device to drive his dream display: viewtopic.php?f=3&t=16723528&

jan-jaap wrote:
It will be interesting to seel how well this device works, and how transparent it is from a software perspective. SGI has a long history of graphics pipe multiplexers (all the way back to the Skywriter cyclops mode), but it always required explicit support from the applications.
It will be interesting, and that's a big part of why I collect and use SGI hardware - I like to figure out what makes things tick. There's a mention in the programmer's guide that the Compositor:
Quote:
transparently distributes rendering across multiple hardware pipes and combines their outputs by either feeding them to a hardware compositor device or through software composition
Whether than means complete transparency for any application or only through custom programming I don't know <and since this a hobby rather than a livelihood, am not really bothered one way or the other>. But I intend to have fun finding out. :D

_________________
***********************************************************************
Welcome to ARMLand - 0/0x0d00
running...(sherwood-root 0607201829)
* InfiniteReality/Reality Software, IRIX 6.5 Release *
***********************************************************************


Top
 Profile  
 
Unread postPosted: Tue Oct 26, 2010 7:54 am 
Offline

Joined: Wed Mar 11, 2009 7:17 pm
Posts: 337
Location: NYC
nice expansion :)


Top
 Profile  
 
Unread postPosted: Tue Nov 02, 2010 7:04 am 
Offline
User avatar

Joined: Mon Nov 10, 2003 4:17 pm
Posts: 2221
Location: Edinburgh, Scotland
Benchmarks please! 8)

Blender, C-Ray, etc...

Ian.

_________________
(07/Mar/2014) WANTED! Dual Channel Display (DCD) option boards for O2, SGI PN 030-1296-002.
Please contact me asap if you have one or more available!
Email is best (mapesdhs@yahoo.com), or call +44 (0)131 476 0796, or PM.


Top
 Profile  
 
Unread postPosted: Tue Aug 09, 2011 8:12 am 
Offline
Moderator
Moderator
User avatar

Joined: Sun Jun 06, 2004 4:55 pm
Posts: 5190
Location: NC - USA
Update: Finally found a second V12. The original post has been revised to reflect the changes: viewtopic.php?f=14&t=16722294

As soon as I get enough 75ohm BNC plumbing on hand I'll try out the Compositor.

_________________
***********************************************************************
Welcome to ARMLand - 0/0x0d00
running...(sherwood-root 0607201829)
* InfiniteReality/Reality Software, IRIX 6.5 Release *
***********************************************************************


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 92 posts ]  Go to page 1, 2, 3, 4, 5 ... 7  Next

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group