Ok, so the twin is upgraded and done.
The short one:
Code:
>> hinv
System SGI-IP27
8 250 MHz IP27 Processors
Main memory size: 3968 Mbytes
Integral SCSI controller 0
Integral SCSI controller 1
Integral Fast Ethernet
IOC3 serial port
Integral SCSI controller
Integral SCSI controller
Integral SCSI controller
Integral SCSI controller
Disk drive: unit 1 on SCSI Controller 0, (dksc(0,1,0))
CDROM: unit 6 on SCSI Controller 0, (cdrom(0,6,7))
And the long one:
Code:
>> hinv -v -m
IP27 Node Board, Module 1, Slot n1
ASIC HUB Rev 5, 100 MHz, (nasid 0)
Processor A: 250 MHz R10000, Rev 3.4, 4M 250MHz secondary cache, (cpu 0)
Processor B: 250 MHz R10000, Rev 3.4, 4M 250MHz secondary cache, (cpu 1)
Memory on board, 1280 MBytes (Standard)
Bank 0, 512 MBytes (Standard) <-- (Software Bank 0)
Bank 1, 128 MBytes (Standard)
Bank 2, 128 MBytes (Standard)
Bank 3, 128 MBytes (Standard)
Bank 4, 128 MBytes (Standard)
Bank 5, 128 MBytes (Standard)
Bank 6, 128 MBytes (Standard)
IP27 Node Board, Module 1, Slot n2
ASIC HUB Rev 5, 100 MHz, (nasid 1)
Processor A: 250 MHz R10000, Rev 3.4, 4M 250MHz secondary cache, (cpu 2)
Processor B: 250 MHz R10000, Rev 3.4, 4M 250MHz secondary cache, (cpu 3)
Memory on board, 1280 MBytes (Standard)
Bank 0, 512 MBytes (Standard) <-- (Software Bank 0)
Bank 1, 128 MBytes (Standard)
Bank 2, 128 MBytes (Standard)
Bank 3, 128 MBytes (Standard)
Bank 4, 128 MBytes (Standard)
Bank 5, 128 MBytes (Standard)
Bank 6, 128 MBytes (Standard)
IP27 Node Board, Module 1, Slot n3
ASIC HUB Rev 5, 100 MHz, (nasid 2)
Processor A: 250 MHz R10000, Rev 3.4, 4M 250MHz secondary cache, (cpu 4)
Processor B: 250 MHz R10000, Rev 3.4, 4M 250MHz secondary cache, (cpu 5)
Memory on board, 768 MBytes (Standard)
Bank 0, 256 MBytes (Standard) <-- (Software Bank 0)
Bank 1, 256 MBytes (Standard)
Bank 2, 256 MBytes (Standard)
IP27 Node Board, Module 1, Slot n4
ASIC HUB Rev 5, 100 MHz, (nasid 3)
Processor A: 250 MHz R10000, Rev 3.4, 4M 250MHz secondary cache, (cpu 6)
Processor B: 250 MHz R10000, Rev 3.4, 4M 250MHz secondary cache, (cpu 7)
Memory on board, 640 MBytes (Standard)
Bank 0, 256 MBytes (Standard) <-- (Software Bank 0)
Bank 1, 128 MBytes (Standard)
Bank 2, 128 MBytes (Standard)
Bank 3, 128 MBytes (Standard)
BASEIO IO Board, Module 1, Slot io1
ASIC BRIDGE Rev 4, (widget 8)
adapter PCI-SCSI Rev 5, (pci id 0)
peripheral SCSI DISK, ID 1, SGI IBM DGHS09Y
peripheral SCSI CDROM, ID 6, TOSHIBA CD-ROM XM-6201TA
adapter PCI-SCSI Rev 5, (pci id 1)
adapter IOC3 Rev 1, (pci id 2)
controller multi function SuperIO Rev 0
controller Ethernet Rev 1
MSCSI IO Board, Module 1, Slot io5
ASIC BRIDGE Rev 4, (widget 14)
adapter PCI-SCSI Rev 5, (pci id 0)
adapter PCI-SCSI Rev 5, (pci id 1)
adapter PCI-SCSI Rev 5, (pci id 2)
adapter PCI-SCSI Rev 5, (pci id 3)
ASIC ROUTER , Module 1, Slot r1 (nasid 1)
ASIC ROUTER , Module 1, Slot r2 (nasid 3)
MIDPLANE, Module 1 Frequency 390 MHz
ASIC XBOW Rev 4, on midplane of Module 1
MIDPLANE, Module 1 Frequency 390 MHz
ASIC XBOW Rev 4, on midplane of Module 1
A big honkin' THANK YOU goes out to fieldframe for the donation of nodeboards, routers and RAM!The hinv is for the system on the left in the photo.
/Matt
_________________
If I can't fix it I can fix it so it can't be fixed.

+MXE/IO6G

[RE2]

x3

x2

x3

x2

x2

x5

x2,
2xSparcStation 20 and a horde of PC's