Nekochan Net

Official Chat Channel: #nekochan // irc.nekochan.net
It is currently Thu Sep 09, 2010 11:55 am

View unanswered posts | View active topics


Board index » SGI » SGI: hinv

All times are UTC - 8 hours [ DST ]

Forum rules


Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.



Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 
  Print view Previous topic | Next topic 
Author Message
sybrfreq
 Post subject: Onyx 4xR10000 InfiniteReality
PostPosted: Mon Dec 08, 2008 5:31 pm 
Offline
User avatar

Joined: Tue Aug 21, 2007 10:12 pm
Posts: 1696
Location: Loveland, Ohio ~ Ottawa, Ontario
baby steps--- this is still a work in progress as the monitor isn't working quite right but I'll post what I have now and update later as things progress.

Code:
IRIS 3# hinv -vm
CPU Board at Slot 2: (Enabled)
  Processor 0 at Slot 2/Slice 0: 194 Mhz R10000 with 2 MB secondary cache (Enabled)
  Processor 1 at Slot 2/Slice 1: 194 Mhz R10000 with 2 MB secondary cache (Enabled)
  Processor 2 at Slot 2/Slice 2: 194 Mhz R10000 with 2 MB secondary cache (Enabled)
  Processor 3 at Slot 2/Slice 3: 194 Mhz R10000 with 2 MB secondary cache (Enabled)
CPU: MIPS R10000 Processor Chip Revision: 2.5
FPU: MIPS R10010 Floating Point Chip Revision: 0.0
Main memory size: 192 Mbytes, 1-way interleaved
MC3 Memory Board at Slot 1: 256 MB of memory (Enabled)
  Bank A contains 16 MB SIMMS (Enabled)
  Bank B contains 16 MB SIMMS (Enabled)
  Bank C contains 16 MB SIMMS (Enabled)
  Bank D contains 16 MB SIMMS (Disabled)
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version WD33C95A, single ended, revision 0
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
  Tape drive: unit 2 on SCSI controller 0: 8mm(8500) cartridge
  CDROM: unit 4 on SCSI controller 0
  Tape drive: unit 5 on SCSI controller 0: DAT
Integral SCSI controller 1: Version WD33C95A, differential, revision 0
Integral EPC serial ports: 4
Integral EPC parallel port: Ebus slot 3
Graphics board: InfiniteReality
Integral Ethernet controller: et0, Ebus slot 3
I/O board, Ebus slot 3: IO4 revision 1
VME bus: adapter 13
VME bus: adapter 0 mapped to adapter 13
EPC external interrupts


Code:
IRIS 7# /usr/gfx/gfxinfo
Graphics board 0 is "KONAS" graphics.
        Managed (":0.0") 1280x1024
        Display has 2 channels
        4 GEs (of 4), occmask = 0x0f
        4MB external BEF ram, 32bit path
        1 RM6 board (of 1) 1/0/0/0
        Texture Memory: 16MB/-/-/-
        Medium pixel depth
        32K cmap
        Sirius video option detected
        (Could not contact X server; thus, no XSGIvc information available)

_________________
:Onyx: (Aldebaran) :Octane: (Chaos):O2: (Machop)
:hp xw9300: (Aggrocrag) :hp dv8000: (Attack)

Top
 Profile E-mail  
 
jan-jaap
 Post subject: Re: Onyx 4xR10000 InfiniteReality
PostPosted: Tue Dec 09, 2008 2:14 am 
Offline
User avatar

Joined: Thu Jun 17, 2004 11:35 am
Posts: 2731
Location: Wijchen, The Netherlands
sybrfreq wrote:
Code:
  Processor 0 at Slot 2/Slice 0: 194 Mhz R10000 with 2 MB secondary cache (Enabled)

2MB L2 -- nice :)
sybrfreq wrote:
Code:
  Bank D contains 16 MB SIMMS (Disabled)

Bummer. Tried 'enableall' and/or 'update' from the PROM console?

_________________
Now this is a deep dark secret, so everybody keep it quiet :)
It turns out that when reset, the WD33C93 defaults to a SCSI ID of 0, and it was simpler to leave it that way... -- Dave Olson, in comp.sys.sgi
Currently in commercial service: Image :Octane2: :Onyx2:(2x) :0300:
In the museum: almost every MIPS/IRIX system.

Top
 Profile  
 
sybrfreq
 Post subject: Re: Onyx 4xR10000 InfiniteReality
PostPosted: Tue Dec 09, 2008 12:38 pm 
Offline
User avatar

Joined: Tue Aug 21, 2007 10:12 pm
Posts: 1696
Location: Loveland, Ohio ~ Ottawa, Ontario
jan-jaap wrote:
sybrfreq wrote:
Code:
  Bank D contains 16 MB SIMMS (Disabled)

Bummer. Tried 'enableall' and/or 'update' from the PROM console?


fixed with reseating.

Also the sirius board (030-0766-004) has been pulled off the DG for the time being as I don't have all the parts for that setup--nor do I know what's involved--nor have I any use for the thing atm.

_________________
:Onyx: (Aldebaran) :Octane: (Chaos):O2: (Machop)
:hp xw9300: (Aggrocrag) :hp dv8000: (Attack)

Top
 Profile E-mail  
 
kokoboi
 Post subject: Re: Onyx 4xR10000 InfiniteReality
PostPosted: Thu Dec 11, 2008 11:44 pm 
Offline
User avatar

Joined: Fri Sep 08, 2006 4:44 pm
Posts: 80
Location: Bulgaria
congr. pics? :oops:

_________________
"Look on wife/girlfriends/parents face when you drag all this stuff(IRIS CRIMSON, ONYX, ONYX2, ORIGIN 2000 ,etc.) home.... Priceless! ;)"
:Fuel: :Fuel: :O200: :0300: :0300: :Indy: :Indigo2IMP: :O2: :O2: :Octane: :hpserv:

Top
 Profile  
 
jan-jaap
 Post subject: Re: Onyx 4xR10000 InfiniteReality
PostPosted: Fri Dec 12, 2008 3:28 am 
Offline
User avatar

Joined: Thu Jun 17, 2004 11:35 am
Posts: 2731
Location: Wijchen, The Netherlands
kokoboi wrote:
congr. pics? :oops:

http://www.nekochan.net/gallery2/v/SGI_ ... reqs_onyx/
viewtopic.php?f=1&t=16719506

_________________
Now this is a deep dark secret, so everybody keep it quiet :)
It turns out that when reset, the WD33C93 defaults to a SCSI ID of 0, and it was simpler to leave it that way... -- Dave Olson, in comp.sys.sgi
Currently in commercial service: Image :Octane2: :Onyx2:(2x) :0300:
In the museum: almost every MIPS/IRIX system.

Top
 Profile  
 
sybrfreq
 Post subject: Re: Onyx 4xR10000 InfiniteReality
PostPosted: Mon Nov 02, 2009 7:09 pm 
Offline
User avatar

Joined: Tue Aug 21, 2007 10:12 pm
Posts: 1696
Location: Loveland, Ohio ~ Ottawa, Ontario
update: more memory (thanks archaic!)

Code:
Aldebaran 9# hinv -vm
CPU Board at Slot 2: (Enabled)
  Processor 0 at Slot 2/Slice 0: 194 Mhz R10000 with 2 MB secondary cache (Enabled)
  Processor 1 at Slot 2/Slice 1: 194 Mhz R10000 with 2 MB secondary cache (Enabled)
  Processor 2 at Slot 2/Slice 2: 194 Mhz R10000 with 2 MB secondary cache (Enabled)
  Processor 3 at Slot 2/Slice 3: 194 Mhz R10000 with 2 MB secondary cache (Enabled)
CPU: MIPS R10000 Processor Chip Revision: 2.5
FPU: MIPS R10010 Floating Point Chip Revision: 2.5
Main memory size: 2048 Mbytes, 2-way interleaved
MC3 Memory Board at Slot 1: 2048 MB of memory (Enabled)
  Bank A contains 64 MB SIMMS (Enabled)
  Bank B contains 64 MB SIMMS (Enabled)
  Bank C contains 64 MB SIMMS (Enabled)
  Bank D contains 64 MB SIMMS (Enabled)
  Bank E contains 64 MB SIMMS (Enabled)
  Bank F contains 64 MB SIMMS (Enabled)
  Bank G contains 64 MB SIMMS (Enabled)
  Bank H contains 64 MB SIMMS (Enabled)
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version WD33C95A, single ended, revision 0
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
  CDROM: unit 3 on SCSI controller 0
  Tape drive: unit 4 on SCSI controller 0: 8mm(8500) cartridge
  Tape drive: unit 5 on SCSI controller 0: DAT
Integral SCSI controller 1: Version WD33C95A, differential, revision 0
Integral EPC serial ports: 4
Integral EPC parallel port: Ebus slot 3
Graphics board: InfiniteReality
Integral Ethernet controller: et0, Ebus slot 3
I/O board, Ebus slot 3: IO4 revision 1
VME bus: adapter 13
VME bus: adapter 0 mapped to adapter 13
EPC external interrupts


also, the graphics work now :)

Code:
Aldebaran 34# /usr/gfx/gfxinfo
Graphics board 0 is "KONAS" graphics.
        Managed (":0.0") 1280x1024
        Display has 2 channels
        4 GEs (of 4), occmask = 0x0f
        4MB external BEF ram, 32bit path
        1 RM6 board (of 1) 1/0/0/0
        Texture Memory: 16MB/-/-/-
        Medium pixel depth
        32K cmap
        Sirius video option detected
        Channel 0:
         Origin = (0,0)
         Video Output: 1280 pixels, 1024 lines, 60.00Hz (1280x1024_60.vfo)
        Channel 1:
         Channel's Source Size: 1280 pixels, 1024 lines; Origin = (0,0)
         Video Output: 640 pixels, 486 lines, 29.97Hz (640x486_30i.vfo)

_________________
:Onyx: (Aldebaran) :Octane: (Chaos):O2: (Machop)
:hp xw9300: (Aggrocrag) :hp dv8000: (Attack)

Top
 Profile E-mail  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 

Board index » SGI » SGI: hinv

All times are UTC - 8 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group