Nekochan Net

Official Chat Channel: #nekochan // irc.nekochan.net
It is currently Sat Nov 01, 2014 1:19 am

All times are UTC - 8 hours [ DST ]


Forum rules


Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.



Post new topic Reply to topic  [ 15 posts ] 
Author Message
Unread postPosted: Wed May 07, 2014 12:33 pm 
Offline

Joined: Thu Aug 15, 2013 6:22 am
Posts: 150
Well, I now feel that my SGI collection has reached the level where I have all the machines I covet, and it's not yet at the level of annoying the missus.

Following on from my Indigo2 back in January (hinv also in this forum), I've finally added my other most-wanted SGI system - a Fuel. Still need to finish off setting some of the stuff up on it (Ian's IRIX installations include just about everything, so take a bit of tweaking to get things into a structure that suits me), also need to add a spare 300GB secondary drive to it that I have sitting here. Still, it does have an M-Audio Revolution sound card fitted to it for starters :)

Still! Without further ado, here's the basic hinv:

Code:

1 600 MHZ IP35 Processor
CPU: MIPS R14000 Processor Chip Revision: 2.4
FPU: MIPS R14010 Floating Point Chip Revision: 2.4
Main memory size: 4096 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Integral SCSI controller 2: Version QL12160, low voltage differential
Integral SCSI controller 4: Version QL12160, low voltage differential
Integral SCSI controller 0: Version QL12160, low voltage differential
  Disk drive: unit 1 on SCSI controller 0
Integral SCSI controller 1: Version QL12160, single ended
  CDROM: unit 4 on SCSI controller 1
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: V10
Integral Fast Ethernet: ef0, version 1, module 001c01, pci 4
Iris Audio Processor: version MAD revision 1, number 1
USB controller: type OHCI


And for those who want more info, here's the hinv -vm:

Code:
Location: /hw/module/001c01/node
            IP34 Board: barcode MMN192     part 030-1707-003 rev -H
Location: /hw/module/001c01/node/cpubus/0
        IP34PIMM Board: barcode NEY877     part 030-1730-002 rev -E
Location: /hw/module/001c01/Ibrick/xtalk/13
         ASTODYB Board: barcode MLB759     part 030-1725-001 rev -F
Location: /hw/module/001c01/Ibrick/xtalk/14
            IP34 Board: barcode MMN192     part 030-1707-003 rev -H
Location: /hw/module/001c01/Ibrick/xtalk/15
            IP34 Board: barcode MMN192     part 030-1707-003 rev -H
1 600 MHZ IP35 Processor
CPU: MIPS R14000 Processor Chip Revision: 2.4
FPU: MIPS R14010 Floating Point Chip Revision: 2.4
CPU 0 at Module 001c01/Slot 0/Slice A: 600 Mhz MIPS R14000 Processor Chip (enabled)
  Processor revision: 2.4. Scache: Size 4 MB Speed 300 Mhz  Tap 0xa
Main memory size: 4096 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Memory at Module 001c01/Slot 0: 4096 MB (enabled)
  Bank 0 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 1 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 2 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 3 contains 1024 MB (Premium) DIMMS (enabled)
Integral SCSI controller 2: Version QL12160, low voltage differential
Integral SCSI controller 4: Version QL12160, low voltage differential
Integral SCSI controller 0: Version QL12160, low voltage differential
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL12160, single ended
  CDROM: unit 4 on SCSI controller 1
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: V10
Integral Fast Ethernet: ef0, version 1, module 001c01, pci 4
Iris Audio Processor: version MAD revision 1, number 1
  PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 1
  PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 1
  PCI Adapter ID (vendor 0x1412, device 0x1724) PCI slot 2
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 4
  PCI Adapter ID (vendor 0x11c1, device 0x5802) PCI slot 5
HUB in Module 001c01/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
IP35prom in Module 001c01/Slot n0: Revision 6.210
USB controller: type OHCI


Pics will get edited in from my main PC (posting this on the Fuel of course!!).

EDIT: And here we are!

Attachment:
File comment: The Fuel!!
2014-05-07 07.19.41.jpg
2014-05-07 07.19.41.jpg [ 168.39 KiB | Viewed 701 times ]


Attachment:
File comment: ...And my current desk setup :)
2014-05-07 07.19.23.jpg
2014-05-07 07.19.23.jpg [ 175.64 KiB | Viewed 701 times ]


For those who are interested, the SGIs all run through the left-hand monitor (a 20" Dell). However it's also set up to act as a second screen for my PC when I need it as well. What you can't see is the Mac Mini hiding under the desk (there's another one downstairs as well).

_________________
Systems in use:
:Fuel: - Lithium: R14000 600MHz CPU, 4GB RAM, V10 Graphics, 36GB 15K HDD, New/quiet fans, IRIX 6.5.30
:Indigo2IMP: - Nitrogen: R10000 195MHz CPU, 256MB RAM, SolidIMPACT Graphics, 36GB 15K HDD & 300GB 10K HDD, New/quiet fans, IRIX 6.5.22
Other systems in storage: :O2: x 2, :Indy: x 2


Top
 Profile  
 
Unread postPosted: Wed May 07, 2014 1:53 pm 
Offline
User avatar

Joined: Wed Jul 25, 2012 7:12 pm
Posts: 1004
Location: Sunny So Cal
Love Big Red!

_________________
smit happens.

:Fuel: bigred, 800MHz R16K, 4GB RAM, V12, 6.5.30
:Indy: indy, 150MHz R4400SC, 256MB RAM, XL24, 6.5.10
:Indigo2IMP: purplehaze, R10000, Solid IMPACT (full hinv pending)
probably posted from Image bruce, 2x2x2.5GHz PowerPC 970MP, 8GB RAM, Mac OS X 10.4.11
plus IBM POWER6 p520 * Apple Network Server 500 * HP C8000 * BeBox * Solbourne S3000 * Commodore 128 * many more...


Top
 Profile  
 
Unread postPosted: Wed May 07, 2014 5:38 pm 
Offline
User avatar

Joined: Sun Mar 18, 2007 3:25 pm
Posts: 1909
Location: Minneapolis, Minnesota USA
I spy with my little eye a Shark PC and... a turntable? :o

_________________
Project:
Temporarily lost at sea...
Plan:
World domination! Or something...


Top
 Profile  
 
Unread postPosted: Wed May 07, 2014 8:29 pm 
Offline
User avatar

Joined: Thu Nov 08, 2007 5:35 pm
Posts: 702
Location: Lynnwood, WA
Very nice collection. I should have skipped the Origin and just gotten the Fuel. It would have been better for the wife approval factor.

I would keep that lovely Indigo2 a couple inches away from the wall myself as that's the cool air intake for keeping your graphics cool. And while we're at it a couple inches behind the fuel if you could.

_________________
:O3000: :Fuel: :Tezro: :Octane2: :Octane: :Indigo: :Indigo: :Indigo: :O2: :1600SW: :Indigo2: :Indigo2: :Indigo2: :Indigo2IMP: :Indigo2IMP: :Indy: :Indy: <--challenge S


Top
 Profile  
 
Unread postPosted: Wed May 07, 2014 8:57 pm 
Offline
User avatar

Joined: Tue Jun 17, 2008 8:38 pm
Posts: 439
Location: Socal
That's one clean setup. Nicely done!

_________________
:Onyx2: :Fuel: :Indigo2: :Indigo2IMP: :O3x0:


Top
 Profile  
 
Unread postPosted: Thu May 08, 2014 12:56 am 
Offline

Joined: Thu Aug 15, 2013 6:22 am
Posts: 150
Thanks!

Japes: The Indigo2 is actually a good cm away from the wall as I'm aware of the air intake on the left hand side. I don't want a cooked IMPACT card any more than you do!

vishnu: Yep, that's a Shark under the desk (Core i5 650 running at 3.2GHz, 8GB RAM, 3TB of HDD space (four RAID-1 1.5TB HDDs), plus a 256GB SSD). Not spectacular, but respectable. And yep, that's also a turntable as well. I do like the odd vinyl from time to time :)

I have to confess that the Mac Mini under the desk is one of the second generation of Intel Mac Minis (with a Core 2 Duo in it), however the Mac Mini downstairs (which is hooked up to my TV as a media centre machine) is a 1.42GHz PowerPC jobbie.

_________________
Systems in use:
:Fuel: - Lithium: R14000 600MHz CPU, 4GB RAM, V10 Graphics, 36GB 15K HDD, New/quiet fans, IRIX 6.5.30
:Indigo2IMP: - Nitrogen: R10000 195MHz CPU, 256MB RAM, SolidIMPACT Graphics, 36GB 15K HDD & 300GB 10K HDD, New/quiet fans, IRIX 6.5.22
Other systems in storage: :O2: x 2, :Indy: x 2


Top
 Profile  
 
Unread postPosted: Thu May 08, 2014 11:23 am 
Offline
User avatar

Joined: Sun Mar 18, 2007 3:25 pm
Posts: 1909
Location: Minneapolis, Minnesota USA
Deluxe! :mrgreen:

I've got a turntable too, but I gave my circa-1992 800 watt Carver poweramp (and equally massive PA system speakers) to my old bandmates so I've got nothing to play it through... :x

_________________
Project:
Temporarily lost at sea...
Plan:
World domination! Or something...


Top
 Profile  
 
Unread postPosted: Thu Jun 26, 2014 2:56 am 
Offline

Joined: Fri Nov 21, 2008 12:18 am
Posts: 307
Location: Sweden
Trippynet wrote:

Japes: The Indigo2 is actually a good cm away from the wall as I'm aware of the air intake on the left hand side. I don't want a cooked IMPACT card any more than you do!


Actually, the Indigo2 sucks air from behind and dumps the hot air front left side for the Gfx boards. The PSU draws cool air from the front and dumps it at the back and cools the rest of the computer. At least mine does.

_________________
Image Image Image Image Image Image

-----------------
Old polygon wrangler
___________________
http://www.edgeloop.se


Top
 Profile  
 
Unread postPosted: Thu Jun 26, 2014 4:42 am 
Offline

Joined: Thu Aug 15, 2013 6:22 am
Posts: 150
Hmm, someone might have replaced the fan in yours and reversed the direction of the airflow. Mine definitely blows air from the front and out the back. I should know, I fitted it a few months back during my "quietening the Indigo2" project. Mine also blows the same way as the one I replaced (I ran the system with the lid off before replacing anything so I could check). :)

_________________
Systems in use:
:Fuel: - Lithium: R14000 600MHz CPU, 4GB RAM, V10 Graphics, 36GB 15K HDD, New/quiet fans, IRIX 6.5.30
:Indigo2IMP: - Nitrogen: R10000 195MHz CPU, 256MB RAM, SolidIMPACT Graphics, 36GB 15K HDD & 300GB 10K HDD, New/quiet fans, IRIX 6.5.22
Other systems in storage: :O2: x 2, :Indy: x 2


Top
 Profile  
 
Unread postPosted: Thu Jun 26, 2014 5:32 am 
Offline
User avatar

Joined: Thu Jun 17, 2004 11:35 am
Posts: 3930
Location: Wijchen, The Netherlands
The Indigo2 chassis has two 'zones':
1. The CPU side has no chassis fan: the air is blown out the back by the PSU fan.
2. The graphics side has an exhaust fan near the front. So yes: it has a back to front airflow.

If the Indigo2 is mounted on it's feet, the feet deflect the heat forwards. I used to have a big yellow cat who *loved* to bask in the heat of my MaxImpact Indigo2 :mrgreen:

_________________
Now this is a deep dark secret, so everybody keep it quiet :)
It turns out that when reset, the WD33C93 defaults to a SCSI ID of 0, and it was simpler to leave it that way... -- Dave Olson, in comp.sys.sgi

Currently in commercial service: Image :Onyx2:(2x) :O3x02L:
In the museum: almost every MIPS/IRIX system.
Wanted: GM1 board for Professional Series GT graphics (030-0076-003, 030-0076-004)


Top
 Profile  
 
Unread postPosted: Thu Jun 26, 2014 5:45 am 
Offline

Joined: Fri Nov 21, 2008 12:18 am
Posts: 307
Location: Sweden
Trippynet wrote:
Hmm, someone might have replaced the fan in yours and reversed the direction of the airflow. Mine definitely blows air from the front and out the back. I should know, I fitted it a few months back during my "quietening the Indigo2" project. Mine also blows the same way as the one I replaced (I ran the system with the lid off before replacing anything so I could check). :)


If thats the case, I have to reverse it! lol :) But I wonder what way is the best. Considering that the small area that actually lets air out(or in) is so small in the back, it feels more logical to suck the cool air in and vent out the hot air in the front instead of blowing cool air in a hot environment that only has that small area to escape? I guess a fluid dynamics expert could tell. If you would to put a Max-Impact boardset into the Indigo2, the cooling would be extra important considering how hot it gets.

Probably mine is in the wrong way anyway, 2 against 1 :P

Edit; ah, 2 vs 2 :P

Edit again, what am I talking abut, it's 1 vs 2. Damn, need a cup of coffe it seems. lol I missed that it was your hinv thread Trippy, so when you said that your fans was in the other way I thought you confirmed the OP's Indigo2 "correctness" :P

_________________
Image Image Image Image Image Image

-----------------
Old polygon wrangler
___________________
http://www.edgeloop.se


Top
 Profile  
 
Unread postPosted: Fri Jun 27, 2014 4:46 am 
Offline

Joined: Thu Aug 15, 2013 6:22 am
Posts: 150
I'm a big believer in having a common airflow through a system, so air in at the front and out at the back. What is most effective, I'm not sure to be honest. However, I only have a SolidIMPACT, so it doesn't produce that much heat.

_________________
Systems in use:
:Fuel: - Lithium: R14000 600MHz CPU, 4GB RAM, V10 Graphics, 36GB 15K HDD, New/quiet fans, IRIX 6.5.30
:Indigo2IMP: - Nitrogen: R10000 195MHz CPU, 256MB RAM, SolidIMPACT Graphics, 36GB 15K HDD & 300GB 10K HDD, New/quiet fans, IRIX 6.5.22
Other systems in storage: :O2: x 2, :Indy: x 2


Top
 Profile  
 
Unread postPosted: Fri Jun 27, 2014 8:59 pm 
Offline
User avatar

Joined: Sun Mar 18, 2007 3:25 pm
Posts: 1909
Location: Minneapolis, Minnesota USA
We had so many SolidIMPACTs here back in the day that the installers used to walk by cubes and throw them in like they were nothing more than the morning newspaper... :lol:

_________________
Project:
Temporarily lost at sea...
Plan:
World domination! Or something...


Top
 Profile  
 
Unread postPosted: Sat Jun 28, 2014 1:31 pm 
Offline
User avatar

Joined: Tue Aug 21, 2007 10:12 pm
Posts: 2859
Location: Fantasyland
Trippynet wrote:
I'm a big believer in having a common airflow through a system, so air in at the front and out at the back. What is most effective, I'm not sure to be honest. However, I only have a SolidIMPACT, so it doesn't produce that much heat.

What would be most effective is back-to-front, the way the SGI gods designed it. Why waste all their efforts? :)

_________________
"If no one comes from the future to stop you from doing it then how bad of a decision can it really be?"


Top
 Profile  
 
Unread postPosted: Sun Jun 29, 2014 4:44 am 
Offline

Joined: Thu Aug 15, 2013 6:22 am
Posts: 150
Because it gets toasty behind my Indigo2, what with the heat the PSU kicks out, so I can't imagine it's good form to have all that heat promptly sucked back in next to the graphics card. :)

_________________
Systems in use:
:Fuel: - Lithium: R14000 600MHz CPU, 4GB RAM, V10 Graphics, 36GB 15K HDD, New/quiet fans, IRIX 6.5.30
:Indigo2IMP: - Nitrogen: R10000 195MHz CPU, 256MB RAM, SolidIMPACT Graphics, 36GB 15K HDD & 300GB 10K HDD, New/quiet fans, IRIX 6.5.22
Other systems in storage: :O2: x 2, :Indy: x 2


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 15 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group