O2 R10000 175MHz, 384MB RAM

A place to post hardware inventories.
Forum rules
Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.
User avatar
Posts: 799
Joined: Tue Nov 25, 2003 12:09 pm
Location: Europe

O2 R10000 175MHz, 384MB RAM

Unread postby ShadeOfBlue » Thu Jan 08, 2004 1:32 am

Code: Select all

[a@sirius:~]> hinv -v                                                           
CPU: MIPS R10000 Processor Chip Revision: 2.6
FPU: MIPS R10010 Floating Point Chip Revision: 0.0
1 175 MHZ IP32 Processor
Main memory size: 384 Mbytes
Secondary unified instruction/data cache size: 1 Mbyte on Processor 0
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
FLASH PROM version 4.16
Integral SCSI controller 0: Version ADAPTEC 7880
  Disk drive: unit 2 on SCSI controller 0 (unit 2)
  CDROM: unit 4 on SCSI controller 0
Integral SCSI controller 1: Version ADAPTEC 7880
On-board serial ports: tty1
On-board serial ports: tty2
On-board EPP/ECP parallel port
CRM graphics installed
Integral Ethernet: ec0, version 1
Iris Audio Processor: version A3 revision 0
  PCI Adapter ID (vendor 36868, device 32888) pci slot 1
  PCI Adapter ID (vendor 36868, device 32888) pci slot 2
Video: MVP unit 0 version 1.4
 with no AV Card or Camera.
Vice: TRE

Code: Select all

[a@sirius:~]> /usr/gfx/gfxinfo -v
Graphics board 0 is "CRM" graphics.
        Managed (":0.0") 1280x1024
        32 + 32 bitplanes
        board revision 2, CRM revision C, GBE revision B
         Monitor 0 type: SAM 187 [this is actually a Samsung 193T LCD, but it didn't exist when 6.5.15 was made, so... :) ]
        Channel 0:
         Origin = (0,0)
         Video Output: 1280 pixels, 1024 lines, 59.94Hz (1280x1024_60)
         Video Format Flags:  (none)
         Sync Disabled
         Using Gamma Map 0

Return to “SGI: hinv”

Who is online

Users browsing this forum: No registered users and 1 guest