Home Origin 2000 :)

A place to post hardware inventories.
Forum rules
Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.
User avatar
cosmos
Posts: 231
Joined: Mon Dec 29, 2003 2:30 am
Location: Los Angeles, CA
Contact:

Home Origin 2000 :)

Unread postby cosmos » Wed Jan 07, 2004 7:12 pm

4 250 MHZ IP27 Processors
CPU: MIPS R10000 Processor Chip Revision: 3.4
FPU: MIPS R10010 Floating Point Chip Revision: 3.4
CPU 0 at Module 1/Slot 1/Slice A: 250 Mhz MIPS R10000 Processor Chip (enabled)
Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz Tap 0x9
CPU 1 at Module 1/Slot 1/Slice B: 250 Mhz MIPS R10000 Processor Chip (enabled)
Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz Tap 0x9
CPU 2 at Module 1/Slot 2/Slice A: 250 Mhz MIPS R10000 Processor Chip (enabled)
Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz Tap 0x9
CPU 3 at Module 1/Slot 2/Slice B: 250 Mhz MIPS R10000 Processor Chip (enabled)
Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz Tap 0x9
Main memory size: 1472 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Memory at Module 1/Slot 1: 704 MB (enabled)
Bank 1 contains 256 MB (Standard) DIMMS (enabled)
Bank 2 contains 128 MB (Standard) DIMMS (enabled)
Bank 3 contains 64 MB (Standard) DIMMS (enabled)
Bank 4 contains 64 MB (Standard) DIMMS (enabled)
Bank 5 contains 64 MB (Standard) DIMMS (enabled)
Bank 6 contains 64 MB (Standard) DIMMS (enabled)
Bank 7 contains 64 MB (Standard) DIMMS (enabled)
Memory at Module 1/Slot 2: 768 MB (enabled)
Bank 1 contains 256 MB (Standard) DIMMS (enabled)
Bank 2 contains 128 MB (Standard) DIMMS (enabled)
Bank 3 contains 128 MB (Standard) DIMMS (enabled)
Bank 4 contains 64 MB (Standard) DIMMS (enabled)
Bank 5 contains 64 MB (Standard) DIMMS (enabled)
Bank 6 contains 64 MB (Standard) DIMMS (enabled)
Bank 7 contains 64 MB (Standard) DIMMS (enabled)
Integral SCSI controller 2: Version Fibre Channel QL2200, 33 MHz PCI
Integral SCSI controller 5: Version QL1040B (rev. 2), differential
Integral SCSI controller 6: Version QL1040B (rev. 2), differential
Integral SCSI controller 4: Version QL1040B (rev. 2), differential
Integral SCSI controller 7: Version QL1040B (rev. 2), differential
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Disk drive: unit 2 on SCSI controller 0 (unit 2)
Disk drive: unit 3 on SCSI controller 0 (unit 3)
Disk drive: unit 4 on SCSI controller 0 (unit 4)
CDROM: unit 6 on SCSI controller 0
Integral SCSI controller 3: Version Fibre Channel QL2200, 33 MHz PCI
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2
PCI Adapter ID (vendor 4215, device 8704) pci slot 1
Origin MSCSI board, module 1 slot 7: Revision 3
Origin BASEIO board, module 1 slot 1: Revision 3
PCI Adapter ID (vendor 4215, device 4128) pci slot 0
PCI Adapter ID (vendor 4215, device 4128) pci slot 1
PCI Adapter ID (vendor 4215, device 4128) pci slot 2
PCI Adapter ID (vendor 4215, device 4128) pci slot 3
PCI Adapter ID (vendor 4265, device 3) pci slot 2
PCI Adapter ID (vendor 4215, device 4128) pci slot 0
PCI Adapter ID (vendor 4215, device 4128) pci slot 1
PCI Adapter ID (vendor 4391, device 1024) pci slot 1
Origin PCI XIO board, module 1 slot 2: Revision 4
PCI Adapter ID (vendor 4215, device 8704) pci slot 0
IOC3/IOC4 external interrupts: 1
HUB in Module 1/Slot 1: Revision 5 Speed 100.00 Mhz (enabled)
HUB in Module 1/Slot 2: Revision 5 Speed 100.00 Mhz (enabled)
IP27prom in Module 1/Slot n1: Revision 6.129
IP27prom in Module 1/Slot n2: Revision 6.129
IO6prom on Global Master Baseio in Module 1/Slot io1: Revision 6.129

Return to “SGI: hinv”

Who is online

Users browsing this forum: No registered users and 1 guest