Octane MXE R12000 360MHz

A place to post hardware inventories.
Forum rules
Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.
User avatar
nekonoko
Site Admin
Site Admin
Posts: 8145
Joined: Thu Jan 23, 2003 1:31 am
Location: Pleasanton, California
Contact:

Octane MXE R12000 360MHz

Unread postby nekonoko » Wed Jan 07, 2004 6:59 pm

[Koyori:~] neko 3% hinv -vm

Code: Select all

Location: /hw/node
      PM10360MHZ Board: barcode MLE099     part 030-1590-002 rev  B
Location: /hw/node/xtalk/15
            IP30 Board: barcode GRN429     part 030-0887-005 rev  A
Location: /hw/node/xtalk/15/pci/2
    PWR.SPPLY.ER Board: barcode AAE1240501 part 060-0035-003 rev  A
             FP1 Board: barcode 24231C     part 030-0891-003 rev  E
Location: /hw/node/xtalk/13
        XTALKPCI Board: barcode HPT350     part 030-0952-005 rev  D
Location: /hw/node/xtalk/12
           MOT20 Board: barcode LMC135     part 030-1240-003 rev  H
1 360 MHZ IP30 Processor
Heart ASIC: Revision E
CPU: MIPS R12000 Processor Chip Revision: 3.5
FPU: MIPS R12010 Floating Point Chip Revision: 0.0
Main memory size: 1536 Mbytes
Xbow ASIC: Revision 1.3
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
  Disk drive: unit 2 on SCSI controller 0 (unit 2)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
Integral SCSI controller 2: Version QL1080, low voltage differential
Integral SCSI controller 3: Version QL1080, low voltage differential
Integral SCSI controller 4: Version QL1080, low voltage differential
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: EMXI
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3
  PCI Adapter ID (vendor 0x1077, device 0x1080) PCI slot 1
  PCI Adapter ID (vendor 0x1077, device 0x1080) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1080) PCI slot 3


[Koyori:~] neko 4% /usr/gfx/gfxinfo -v

Code: Select all

Graphics board 0 is "IMPACTSR" graphics.
        Managed (":0.0") 1280x1024
        Product ID 0x3, 2 GEs, 2 REs, 4 TRAMs
        MGRAS revision 4, RA revision 0
        HQ rev B, GE12 rev A, RE4 rev C, PP1 rev H,
        VC3 rev A, CMAP rev F, Heart rev E
        19" monitor (id 0x1)

        Input Sync: Voltage - Video Level; Source - Internal; Genlocked - False
        Channel 0:
         Origin = (0,0)
         Video Output: 1280 pixels, 1024 lines, 75.92Hz (1280x1024_76)
         Video Format Flags:  (none)
         Sync Disabled
         Using Gamma Map 0
Twitter: @neko_no_ko
IRIX Release 4.0.5 IP12 Version 06151813 System V
Copyright 1987-1992 Silicon Graphics, Inc.
All Rights Reserved.

Return to “SGI: hinv”

Who is online

Users browsing this forum: Baidu [Spider] and 1 guest