My best SGI box: Octane 2x300MHz...

A place to post hardware inventories.
Forum rules
Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.
User avatar
The Keeper
Posts: 1632
Joined: Mon Nov 17, 2003 9:23 pm
Location: Buffalo, NY
Contact:

My best SGI box: Octane 2x300MHz...

Unread postby The Keeper » Wed Jan 07, 2004 4:54 pm

octane 1% hinv -v
2 300 MHZ IP30 Processors
Heart ASIC: Revision E
CPU: MIPS R12000 Processor Chip Revision: 2.5
FPU: MIPS R12010 Floating Point Chip Revision: 0.0
Main memory size: 1280 Mbytes
Xbow ASIC: Revision 1.3
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 1 Mbyte
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Disk drive: unit 2 on SCSI controller 0 (unit 2)
Disk drive: unit 3 on SCSI controller 0 (unit 3)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
Integral SCSI controller 2: Version Fibre Channel QL2200, 33 MHz PCI
Disk drive: unit 0 on SCSI controller 2 (unit 0)
Disk drive: unit 1 on SCSI controller 2 (unit 1)
Disk drive: unit 2 on SCSI controller 2 (unit 2)
Disk drive: unit 3 on SCSI controller 2 (unit 3)
Disk drive: unit 4 on SCSI controller 2 (unit 4)
Disk drive: unit 5 on SCSI controller 2 (unit 5)
Disk drive: unit 6 on SCSI controller 2 (unit 6)
Disk drive: unit 7 on SCSI controller 2 (unit 7)
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp-1
Graphics board: EMXI
Graphics board: ESI
Integral Fast Ethernet: ef0, version 1, pci 2
Fast Ethernet: ef1, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3
PCI Adapter ID (vendor 0x1077, device 0x2200) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
octane 2%
octane 2% /usr/gfx/gfxinfo -v
Graphics board 0 is "IMPACTSR" graphics.
Managed (":0.0") 1280x1024
Product ID 0x3, 2 GEs, 2 REs, 4 TRAMs
MGRAS revision 4, RA revision 0
HQ rev B, GE12 rev A, RE4 rev C, PP1 rev H,
VC3 rev A, CMAP rev E, Heart rev E
19" monitor (id 0x1)

(Could not contact X server; thus, no XSGIvc information available)
Graphics board 1 is "IMPACTSR" graphics.
Managed (":0.1") 1280x1024
Product ID 0x2, 1 GE, 1 RE, 0 TRAMs
MGRAS revision 4, RA revision 0
HQ rev B, GE12 rev A, RE4 rev C, PP1 rev E,
VC3 rev A, CMAP rev F, Heart rev E
unknown, assuming 19" monitor (id 0xf)

(Could not contact X server; thus, no XSGIvc information available)
octane 3%

Return to “SGI: hinv”

Who is online

Users browsing this forum: No registered users and 2 guests