Octane 2xr10k, 225mhz, 512mb, 8.3GB

A place to post hardware inventories.
Forum rules
Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.
jnolck
Posts: 76
Joined: Fri Dec 29, 2006 11:37 pm
Location: Gilbert, Arizona

Octane 2xr10k, 225mhz, 512mb, 8.3GB

Unread postby jnolck » Wed Apr 18, 2007 5:13 pm

Code: Select all

harriet 10# hinv -mv
Location: /hw/node
      PM20225MHZ Board: barcode GTM684     part 030-1271-002 rev  F
Location: /hw/node/xtalk/15
            IP30 Board: barcode DTX247     part 030-0887-005 rev  A
Location: /hw/node/xtalk/15/pci/2
             FP1 Board: barcode 07417C     part 030-0891-003 rev  E
    PWR.SPPLY.S2 Board: barcode AAC8150318 part 060-0038-001 rev  D
Location: /hw/node/xtalk/12
            GM10 Board: barcode GPG389     part 030-0938-003 rev  V
2 225 MHZ IP30 Processors
Heart ASIC: Revision D
CPU: MIPS R10000 Processor Chip Revision: 3.4
FPU: MIPS R10010 Floating Point Chip Revision: 0.0
Main memory size: 512 Mbytes
Xbow ASIC: Revision 1.3
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 1 Mbyte
Integral SCSI controller 0: Version QL1040B, single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL1040B, single ended
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: SI with texture option
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3


Got my adaptors from deep space today, so i'm finally able to test the octane. It's not a fancy one, but it's my octane and i love it. I actually drove all the way up to San Francisco to get this one. SGI fever is to blame for such act.
Octane 2xr10k, 225mhz, 512mb, 8.3gb harriet
02 r10k, 150mhz, 256MB, 4GB johannah
Ultra10 333MHz US-IIi, 512MB, 20GB alissa
SB2000 2x750Mhz US-III, 2GB, 36GB cheryl

jnolck
Posts: 76
Joined: Fri Dec 29, 2006 11:37 pm
Location: Gilbert, Arizona

Re: Octane 2xr10k, 225mhz, 512mb, 8.3GB

Unread postby jnolck » Wed Apr 09, 2008 3:54 pm

Got an external cdrom and a new video board.

Code: Select all

bash-3.1# hinv -mv
Location: /hw/node
      PM20225MHZ Board: barcode GTM684     part 030-1271-002 rev  F
Location: /hw/node/xtalk/15
            IP30 Board: barcode DTX247     part 030-0887-005 rev  A
Location: /hw/node/xtalk/15/pci/2
             FP1 Board: barcode 07417C     part 030-0891-003 rev  E
    PWR.SPPLY.S2 Board: barcode AAC8150318 part 060-0038-001 rev  D
Location: /hw/node/xtalk/12
            GM10 Board: barcode GPG389     part 030-0938-003 rev  V
Location: /hw/node/xtalk/10
           MOT10 Board: barcode JHV912     part 030-1241-002 rev  H
2 225 MHZ IP30 Processors
Heart ASIC: Revision D
CPU: MIPS R10000 Processor Chip Revision: 3.4
FPU: MIPS R10010 Floating Point Chip Revision: 0.0
Main memory size: 512 Mbytes
Xbow ASIC: Revision 1.3
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 1 Mbyte
Integral SCSI controller 0: Version QL1040B, single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL1040B, single ended
  CDROM: unit 5 on SCSI controller 1
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: SI with texture option
Graphics board: ESI
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3


Code: Select all

bash-3.1# /usr/gfx/gfxinfo
Graphics board 0 is "IMPACTSR" graphics.
        Managed (":0.0") 1280x1024
        Product ID 0x2, 1 GE, 1 RE, 4 TRAMs
        MGRAS revision 1, RA revision 0
        HQ rev B, GE11 rev B, RE4 rev C, PP1 rev E,
        VC3 rev A, CMAP rev E, Heart rev D
        unknown, assuming 19" monitor (id 0xf)

        Channel 0:
         Origin = (0,0)
         Video Output: 1280 pixels, 1024 lines, 60.00Hz (1280x1024_60)
Graphics board 1 is "IMPACTSR" graphics.
        Managed (":0.1") 1280x1024
        Product ID 0x2, 1 GE, 1 RE, 0 TRAMs
        MGRAS revision 4, RA revision 0
        HQ rev B, GE12 rev A, RE4 rev C, PP1 rev E,
        VC3 rev A, CMAP rev F, Heart rev D
        unknown, assuming 19" monitor (id 0xf)

        Channel 0:
         Origin = (0,0)
         Video Output: 1280 pixels, 1024 lines, 60.00Hz (1280x1024_60)

Octane 2xr10k, 225mhz, 512mb, 8.3gb harriet

02 r10k, 150mhz, 256MB, 4GB johannah

Ultra10 333MHz US-IIi, 512MB, 20GB alissa

SB2000 2x750Mhz US-III, 2GB, 36GB cheryl


Return to “SGI: hinv”

Who is online

Users browsing this forum: No registered users and 2 guests