Octane2 / 2x400 / 5GB RAM / V8 / 36GB HDD

A place to post hardware inventories.
Forum rules
Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.
User avatar
Geoman
Posts: 661
Joined: Thu May 26, 2005 3:37 am
Location: Munich, Germany
Contact:

Octane2 / 2x400 / 5GB RAM / V8 / 36GB HDD

Unread postby Geoman » Sat Mar 24, 2007 5:33 pm

I couldn't resist in upgrading my lovely toy:

Code: Select all

Octane2 1% hinv -mv
Location: /hw/node
      PM20400MHZ Board: barcode XXXXXX     part 030-1476-001 rev  D
Location: /hw/node/xtalk/15
            IP30 Board: barcode XXXXXX     part 030-1467-001 rev  H
Location: /hw/node/xtalk/15/pci/2
    PWR.SPPLY.ER Board: barcode XXXXXXXXXX part 060-0035-002 rev  A
             FP1 Board: barcode XXXXXX     part 030-0891-003 rev  H
Location: /hw/node/xtalk/11
          ODY128 Board: barcode XXXXXX     part 030-1404-003 rev  A
2 400 MHZ IP30 Processors
Heart ASIC: Revision F
CPU: MIPS R12000 Processor Chip Revision: 3.5
FPU: MIPS R12010 Floating Point Chip Revision: 0.0
Main memory size: 5120 Mbytes
Xbow ASIC: Revision 1.4
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 2 on SCSI controller 0 (unit 2)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: V8
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3

Code: Select all

Octane2 2% /usr/gfx/gfxinfo
Graphics board 0 is "ODYSSEY" graphics.
        Managed (":0.0") 1280x1024
        BUZZ version A.1
        PB&J version 1
        128MB memory
                Banks: 4, CAS latency: 3
         Monitor 0 type: Unknown
        Channel 0:
         Origin = (0,0)
         Video Output: 1280 pixels, 1024 lines, 50.00Hz (1280x1024_50)

Running the V8 only at 50Hz on a F180 tft results in a clear image without the typical V6/V8 'OpenGL-artefacts' and problems.
Last edited by Geoman on Thu Jan 02, 2014 12:58 pm, edited 1 time in total.
:Octane2: 2xR12000 400MHz, 4GB RAM, V12
SGI - the legend will never die!!

User avatar
Geoman
Posts: 661
Joined: Thu May 26, 2005 3:37 am
Location: Munich, Germany
Contact:

Upgrade: Octane2 / 2x400 / 8GB RAM / V12 / 36GB HDD

Unread postby Geoman » Thu May 28, 2009 1:59 am

Code: Select all

Octane2 4% hinv -mv
Location: /hw/node
      PM20400MHZ Board: barcode XXXXXX     part 030-1476-001 rev  D
Location: /hw/node/xtalk/15
            IP30 Board: barcode XXXXXX     part 030-1467-001 rev  H
Location: /hw/node/xtalk/15/pci/2
    PWR.SPPLY.ER Board: barcode XXXXXXXXXX part 060-0035-002 rev  A
             FP1 Board: barcode XXXXXX     part 030-0891-003 rev  H
Location: /hw/node/xtalk/11
  ODY128VERSIONB Board: barcode XXXXXX     part 030-1611-001 rev  C
2 400 MHZ IP30 Processors
Heart ASIC: Revision F
CPU: MIPS R12000 Processor Chip Revision: 3.5
FPU: MIPS R12010 Floating Point Chip Revision: 0.0
Main memory size: 8192 Mbytes
Xbow ASIC: Revision 1.4
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
  Disk drive: unit 2 on SCSI controller 0 (unit 2)
  Disk drive: unit 3 on SCSI controller 0 (unit 3)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: V12
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3


Code: Select all

Octane2 5% /usr/gfx/gfxinfo
Graphics board 0 is "ODYSSEY" graphics.
        Managed (":0.0") 1696x1056
        BUZZ version B.1
        PB&J version 1
        128MB memory
                Banks: 4, CAS latency: 3
         Monitor 0 type: Unknown
        Channel 0:
         Origin = (0,0)
         Video Output: 1680 pixels, 1050 lines, 60.00Hz (1680x1050_60)
Last edited by Geoman on Thu Jan 02, 2014 12:59 pm, edited 1 time in total.
:Octane2: 2xR12000 400MHz, 4GB RAM, V12
SGI - the legend will never die!!

User avatar
Geoman
Posts: 661
Joined: Thu May 26, 2005 3:37 am
Location: Munich, Germany
Contact:

Re: Octane2 / 2x400 / 5GB RAM / V8 / 36GB HDD

Unread postby Geoman » Thu Aug 20, 2009 3:56 am

2 Memory modules died :-(
Attachments
IMG_0610.JPG
Last edited by Geoman on Sun Jul 03, 2011 11:00 am, edited 1 time in total.
:Octane2: 2xR12000 400MHz, 4GB RAM, V12
SGI - the legend will never die!!

User avatar
bigD
Posts: 441
Joined: Tue Jun 17, 2008 8:38 pm
Location: Socal

Re: Octane2 / 2x400 / 5GB RAM / V8 / 36GB HDD

Unread postby bigD » Thu Aug 20, 2009 2:55 pm

Sorry to hear about your RAM, Geoman. I had some Dataram memory that served me pretty well for about a year, and one module apparently died right as I sold four sticks of it. It could have been damaged in shipping though - but it does seem like people have been having issues with it. :(
:Onyx2: :Fuel: :Indigo2: :Indigo2IMP: :O3x0:

User avatar
Geoman
Posts: 661
Joined: Thu May 26, 2005 3:37 am
Location: Munich, Germany
Contact:

Re: Octane2 / 2x400 / 5GB RAM / V8 / 36GB HDD

Unread postby Geoman » Fri Aug 21, 2009 3:26 am

Yes, the modules from Kingston and SGI are the double stacked ones, which are comparatively robust.
The ICs on the DATARAM modules look like those for notebooks, they are soldered side by side via ball grid array.

Seems like they're indeed very delicate.
:Octane2: 2xR12000 400MHz, 4GB RAM, V12
SGI - the legend will never die!!

User avatar
Geoman
Posts: 661
Joined: Thu May 26, 2005 3:37 am
Location: Munich, Germany
Contact:

Re: Octane2 / 2x400 / 5GB RAM / V8 / 36GB HDD

Unread postby Geoman » Fri Oct 24, 2014 11:51 am

So I modded the Shoehorn: I had to remove the 013-1926-002 C metal plate* and sawed away the spacer parts from the pcb that collided with the hexagonal screws at the top of the XIO-carrier + used the screws from the placeholder that was on the XIO-carrier. Fits perfectly now.

*not so easy...

Thanks to you fellow Nekochaners, I flasehd my 3C-996 to SGI-firmware:
http://forums.nekochan.net/viewtopic.php?f=3&t=12702&hilit=3c996&start=45#p7294465

So now I've got Gigabit Ethernet up and running at last!
Attachments
IMG_3224.JPG
IMG_3223.JPG
:Octane2: 2xR12000 400MHz, 4GB RAM, V12
SGI - the legend will never die!!

hamei
Posts: 9976
Joined: Tue Feb 24, 2004 5:10 pm
Location: over the rainbow

Re: Octane2 / 2x400 / 5GB RAM / V8 / 36GB HDD

Unread postby hamei » Fri Oct 24, 2014 8:16 pm

Geoman wrote:So now I've got Gigabit Ethernet up and running at last!

I see you've got it in D ... does that kick you into fastfan ?
The right of the people to be secure in their persons, houses, papers, and effects against unreasonable searches and seizures shall not be violated : the entire NSA belongs in prison.

User avatar
Geoman
Posts: 661
Joined: Thu May 26, 2005 3:37 am
Location: Munich, Germany
Contact:

Re: Octane2 / 2x400 / 5GB RAM / V8 / 36GB HDD

Unread postby Geoman » Sat Oct 25, 2014 1:16 am

I installed it on the lower left port. - But the arrow clearly shows D. So fortunately no fastfan.

Strange indeed.
:Octane2: 2xR12000 400MHz, 4GB RAM, V12
SGI - the legend will never die!!


Return to “SGI: hinv”

Who is online

Users browsing this forum: No registered users and 1 guest