Nekochan Net

Official Chat Channel: #nekochan // irc.nekochan.net
It is currently Thu Jul 24, 2014 8:57 am

All times are UTC - 8 hours


Forum rules


Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.



Post new topic Reply to topic  [ 8 posts ] 
Author Message
Unread postPosted: Sat Jun 23, 2012 6:45 am 
Offline
User avatar

Joined: Tue May 09, 2006 10:55 am
Posts: 316
Location: Sweden
Here's a little experiment involving an Origin 200, Gigachannel and an Onyx2 graphics module. Not a supported SGI configuration, but it works.
I might have posted the different components before, in their natural configurations, but not put together like this.
Together it is quite noisy, not something you would like to have next to your desk.

It works fine running IRIX6.5.16m. There can be issues with keyboard/mouse support in newer IRIXes.

Code:
IRIS 1# hinv
4 270 MHZ IP27 Processors
CPU: MIPS R12000 Processor Chip Revision: 2.3
FPU: MIPS R12010 Floating Point Chip Revision: 2.3
Main memory size: 1536 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Integral SCSI controller 6: Version QL1040B (rev. 2), single ended
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 0
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
  CDROM: unit 1 on SCSI controller 1
  Tape drive: unit 7 on SCSI controller 1: DAT
Integral SCSI controller 2: Version Fibre Channel QL2200A
Integral SCSI controller 3: Version Fibre Channel QL2200A
Integral SCSI controller 4: Version Fibre Channel AIC-1160, revision 2
Integral SCSI controller 7: Version QL1040B (rev. 2), single ended
Integral SCSI controller 8: Version QL1040B (rev. 2), single ended
Integral SCSI controller 5: Version Fibre Channel AIC-1160, revision 2
IOC3 serial port: tty1
IOC3 serial port: tty2
IOC3 serial port: tty3
IOC3 serial port: tty4
IOC3 parallel port: plp1
IOC3 parallel port: plp2
Graphics board: InfiniteReality2
Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2
Gigabit Ethernet: eg0, module 1, PCI slot 5, firmware version 0.0.0
Fast Ethernet: ef1, version 1, module 2, slot MotherBoard, pci 2
Origin 200 base I/O, module 2 slot 2
Origin PCI XIO board, module 1 slot 7: Revision 4
Origin 200 base I/O, module 1 slot 1
Origin FIBRE CHANNEL board, module 1 slot 2: Revision 4
IOC3 external interrupts: 1
IOC3 external interrupts: 2

Code:
IRIS 2# hinv -vm
Location: /hw/module/1/slot/MotherBoard/node
  PIMM_270_4M_2P Board: barcode KVJ031     part 013-2511-001 rev  D
Location: /hw/module/1/slot/io7/xbox_dualxtown
  XBOX_DUALXTOWN Board: barcode HLH794     part 030-1252-001 rev  F
Location: /hw/module/1/slot/io1/MotherBoard
        XBOX_EXT Board: barcode HJZ829     part 030-1264-001 rev  C
            IP29 Board: barcode KVJ192     part 030-1389-002 rev  B
Location: /hw/module/1/slot/io1/MotherBoard/pci/2
Location: /hw/module/1/slot/io2/fibre_channel
   FIBRE_CHANNEL Board: barcode HPB024     part 030-0927-003 rev  C
Location: /hw/module/1/slot/io6/kona
          GE14-4 Board: barcode GKL909     part 030-1129-002 rev  H
           KTOWN Board: barcode FTF047     part 030-1067-001 rev  F
Location: /hw/module/2/slot/MotherBoard/node
  PIMM_270_4M_2P Board: barcode KBW649     part 013-2511-001 rev  D
Location: /hw/module/2/slot/MotherBoard/node/xtalk/8
            IP29 Board: barcode KVG280     part 030-1389-002 rev  B
Location: /hw/module/2/slot/MotherBoard/node/xtalk/8/pci/2
4 270 MHZ IP27 Processors
CPU: MIPS R12000 Processor Chip Revision: 2.3
FPU: MIPS R12010 Floating Point Chip Revision: 2.3
CPU 0 at Module 1/Slot 1/Slice A: 270 Mhz MIPS R12000 Processor Chip (enabled)
  Processor revision: 2.3. Scache: Size 4 MB Speed 180 Mhz  Tap 0x9
CPU 1 at Module 1/Slot 1/Slice B: 270 Mhz MIPS R12000 Processor Chip (enabled)
  Processor revision: 2.3. Scache: Size 4 MB Speed 180 Mhz  Tap 0x9
CPU 2 at Module 2/Slot 2/Slice A: 270 Mhz MIPS R12000 Processor Chip (enabled)
  Processor revision: 2.3. Scache: Size 4 MB Speed 180 Mhz  Tap 0x9
CPU 3 at Module 2/Slot 2/Slice B: 270 Mhz MIPS R12000 Processor Chip (enabled)
  Processor revision: 2.3. Scache: Size 4 MB Speed 180 Mhz  Tap 0x9
Main memory size: 1536Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Memory at Module 1/Slot 1: 768 MB (enabled)
  Bank 0 contains 256 MB (Standard) DIMMS (enabled)
  Bank 1 contains 256 MB (Standard) DIMMS (enabled)
  Bank 2 contains 128 MB (Standard) DIMMS (enabled)
  Bank 3 contains 128 MB (Standard) DIMMS (enabled)
Memory at Module 2/Slot 2: 768 MB (enabled)
  Bank 0 contains 256 MB (Standard) DIMMS (enabled)
  Bank 1 contains 256 MB (Standard) DIMMS (enabled)
  Bank 2 contains 128 MB (Standard) DIMMS (enabled)
  Bank 3 contains 128 MB (Standard) DIMMS (enabled)
Integral SCSI controller 6: Version QL1040B (rev. 2), single ended
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
  CDROM: unit 1 on SCSI controller 1
  Tape drive: unit 7 on SCSI controller 1: DAT
Integral SCSI controller 2: Version Fibre Channel QL2200A
Integral SCSI controller 3: Version Fibre Channel QL2200A
Integral SCSI controller 4: Version Fibre Channel AIC-1160, revision 2
Integral SCSI controller 7: Version QL1040B (rev. 2), single ended
Integral SCSI controller 8: Version QL1040B (rev. 2), single ended
Integral SCSI controller 5: Version Fibre Channel AIC-1160, revision 2
IOC3 serial port: tty1
IOC3 serial port: tty2
IOC3 serial port: tty3
IOC3 serial port: tty4
IOC3 parallel port: plp1
IOC3 parallel port: plp2
Graphics board: InfiniteReality2
Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2
Gigabit Ethernet: eg0, module 1, PCI slot 5, firmware version 0.0.0
Fast Ethernet: ef1, version 1, module 2, slot MotherBoard, pci 2
Origin 200 base I/O, module 2 slot 2
Origin PCI XIO board, module 1 slot 7: Revision 4
  PCI Adapter ID (vendor 4265, device 3) pci slot 2
  PCI Adapter ID (vendor 4215, device 4128) pci slot 0
  PCI Adapter ID (vendor 4215, device 4128) pci slot 1
  PCI Adapter ID (vendor 4370, device 8704) pci slot 5
  PCI Adapter ID (vendor 4215, device 4128) pci slot 7
Origin 200 base I/O, module 1 slot 1
  PCI Adapter ID (vendor 4265, device 3) pci slot 2
  PCI Adapter ID (vendor 4215, device 4128) pci slot 0
  PCI Adapter ID (vendor 4215, device 4128) pci slot 1
  PCI Adapter ID (vendor 4265, device 9) pci slot 5
  PCI Adapter ID (vendor 4215, device 8704) pci slot 6
  PCI Adapter ID (vendor 4215, device 8704) pci slot 7
Origin FIBRE CHANNEL board, module 1 slot 2: Revision 4
  PCI Adapter ID (vendor 36868, device 4448) pci slot 0
  PCI Adapter ID (vendor 36868, device 4448) pci slot 1
IOC3 external interrupts: 1
IOC3 external interrupts: 2
HUB in Module 1/Slot 1: Revision 5 Speed 90.00 Mhz (enabled)
HUB in Module 2/Slot 2: Revision 5 Speed 90.00 Mhz (enabled)
IP27prom in Module 1/Slot n1: Revision 6.156
IO6prom on Global Master Baseio in Module 1/Slot io1: Revision 6.156
IP27prom in Module 2/Slot n2: Revision 6.156


Code:
IRIS 3# /usr/gfx/gfxinfo
Graphics board 0 is "KONAL" graphics.
        Managed (":0.0") 1280x1024
        Display has 8 channels
        4 GEs (of 4), occmask = 0x0f
        4MB external BEF ram, 32bit path
        4 RM7 boards (of 4) 1/1/1/1
        Texture Memory: 64MB/64MB/64MB/64MB
        Extra-Large pixel depth
        32K cmap, 64K external gamma
        Channel 0:
         Origin = (0,0)
         Video Output: 1280 pixels, 1024 lines, 60.00Hz (1280x1024_60.vfo)

Code:
IRIS 4# /usr/gfx/gfxinfo -v
Graphics board 0 is "KONAL" graphics.
        Managed (":0.0") 1280x1024
        Display has 8 channels
        4 GEs (of 4), occmask = 0x0f
        4MB external BEF ram, 32bit path
        4 RM7 boards (of 4) 1/1/1/1
        Texture Memory: 64MB/64MB/64MB/64MB
        Extra-Large pixel depth
        32K cmap, 64K external gamma
        brd: 18160a04 3020c06/3020c06/3020c06/3020c06 51bf1002
         ge: 0 14832057 24731057 14231057
        rm0: 15032057 15431057
              4631057 2/2/2/2
              4d31057 2/2/2/2/2/2/2/2
              4938057 5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5
        rm1: 15032057 15431057
              4631057 1/1/1/1
              4d31057 2/2/2/2/2/2/2/2
              4938057 4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4
        rm2: 15032057 15431057
              4631057 2/2/2/2
              4d31057 2/2/2/2/2/2/2/2
              4938057 5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5
        rm3: 15032057 15431057
              4631057 2/2/2/2
              4d31057 2/2/2/2/2/2/2/2
              4938057 5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5
         dg: 05532057
              5838057 1/1/1/1
              5631057 1/1/1/1/1/1/1/1
        GE:   NIC #:      0000.0028.a5c6 (family: 0b)
              Serial #:   GKL909
              Part #:     030-1129-002
        KT:   NIC #:      0000.0018.2913 (family: 0b)
              Serial #:   FTF047
              Part #:     030-1067-001
        RM0:  NIC #:      0000.0013.36f7 (family: 0b)
              Serial #:   EDZ751
              Part #:     030-1054-001
        TM0:  NIC #:      0000.0019.11f5 (family: 0b)
              Serial #:   FDR444
              Part #:     030-1053-001
        RM1:  NIC #:      0000.000e.42ba (family: 0b)
              Serial #:   EDW096
              Part #:     030-1054-001
        TM1:  NIC #:      0000.000e.3eec (family: 0b)
              Serial #:   EDZ085
              Part #:     030-1053-001
        RM2:  NIC #:      0000.0013.3306 (family: 0b)
              Serial #:   EDZ869
              Part #:     030-1054-001
        TM2:  NIC #:      0000.0019.10b0 (family: 0b)
              Serial #:   FDR280
              Part #:     030-1053-001
        RM3:  NIC #:      0000.0025.9c0e (family: 0b)
              Serial #:   DFC228
              Part #:     030-1054-001
        TM3:  NIC #:      0000.002c.519b (family: 0b)
              Serial #:   GCE107
              Part #:     030-1053-001
        BP:   NIC #:      0000.001d.abad (family: 0b)
              Serial #:   ERY238
              Part #:     013-1760-001
        DG:   NIC #:      0000.001a.381b (family: 0b)
              Serial #:   GFY097
              Part #:     030-1087-001
        DGOPT:No NIC serial number available.
        Input Sync: Voltage - Video Level; Source - Internal; Genlocked - False
        Channel 0:
         Origin = (0,0)
         Video Output: 1280 pixels, 1024 lines, 60.00Hz (1280x1024_60.vfo)
         Video Format Flags:  (none)
         Sync Output(s):
          Composite sync on Green
          Composite TTL sync on Aux 0
         Using Gamma Map 0


Top
 Profile  
 
Unread postPosted: Sat Jun 23, 2012 8:18 am 
Offline
User avatar

Joined: Tue Nov 02, 2004 10:44 am
Posts: 411
Location: California
images, please !

_________________
If you can lift it all by yourself, I probably don't want it.


Top
 Profile  
 
Unread postPosted: Sun Jun 24, 2012 1:26 am 
Offline
User avatar

Joined: Tue May 09, 2006 10:55 am
Posts: 316
Location: Sweden
It is not the the prettiest setup, so I didn't take so many pictures, but I did of course take some.
The plastic covers are missing of the O200 for example. I have covers, except a Gigachannel cover I think.
Pictures are taken with my cellphone so the quality is not so good.
I have this in my garage, and when I'm not using it, it is just standing against the wall so the car will have room.
Attachment:
File comment: Four racks against the wall
four_racks.jpg
four_racks.jpg [ 93.65 KiB | Viewed 780 times ]

It's a SGI branded Clariion rack in which I have placed the O200 and some other rack-stuff.
I pull out the Clariion and the Onyx2 rack to be able to access the back and connect it all.
I the right edge of the picture you can se the thick XTOWN-KTOWN cable and a smaller grounding cable between the chassis
Attachment:
File comment: Clariion rack
clariion_front.jpg
clariion_front.jpg [ 99.53 KiB | Viewed 780 times ]

Back of Clariion. XTOWN, keyboard, mouse and serial connected, and of course the O200 + Gigachannel cables.
Attachment:
File comment: Back of Clariion
clariion_back.jpg
clariion_back.jpg [ 116.73 KiB | Viewed 780 times ]

Back of Onyx2. KTOWN and monitor cable.
Attachment:
File comment: Back of Onyx2
onyx2_back.jpg
onyx2_back.jpg [ 118.75 KiB | Viewed 780 times ]

I used a laptop to get IRIX installed. After that, I could run it from the normal keyboard/mouse.
Attachment:
File comment: The consoles
consoles.jpg
consoles.jpg [ 101.72 KiB | Viewed 780 times ]

To make this more readable I didn't resize this picture, but it's not good quality
Attachment:
File comment: Closeup of Onyx 200 system info
console_closeup.jpg
console_closeup.jpg [ 728.9 KiB | Viewed 780 times ]


Top
 Profile  
 
Unread postPosted: Sun Jun 24, 2012 2:07 pm 
Offline
User avatar

Joined: Sun Mar 18, 2007 2:25 pm
Posts: 1717
Location: Minneapolis, Minnesota USA
That is amazing! :shock:

What'cha gonna do with it? :mrgreen:

_________________
Project:
Simple as do, re, mi. a, b, c. one, two, three baby you and me
Plan:
World domination! Or something...


Top
 Profile  
 
Unread postPosted: Mon Jun 25, 2012 6:47 am 
Offline

Joined: Tue Sep 21, 2010 2:31 pm
Posts: 284
Location: Southwestern Ontario, Canada
vishnu wrote:
What'cha gonna do with it? :mrgreen:

Make the rest of us jealous and cause a lot of head scratching? :lol:

When I first saw the thread, I was convinced "Onyx 200" was a typo. Apparently not. But it's that modularity of the hardware permitting such odd configurations that makes SGI hardware so much fun to play with, isn't it?

Perhaps this is the start of bjornl's evil plot to take over the world by leaving the rest of sitting here muttering under our breath, "what the heck?". Or maybe that's just me. :D

_________________
:Indigo2IMP: :Octane: :Indigo: :O3x0:
Sun SPARCstation 20, Blade 2500
HP C8000


Top
 Profile  
 
Unread postPosted: Fri Jun 29, 2012 11:02 am 
Offline
User avatar

Joined: Tue May 09, 2006 10:55 am
Posts: 316
Location: Sweden
Thank you
vishnu wrote:
What'cha gonna do with it? :mrgreen:

What do you mean? There are dozens of household uses. Heating the garage, testing earprotection, weightlifting. Just to name a few... :)
I will probably run it very rarely since it is easier to startup the Onyx2 that is usually connected, but maybe I should try the MGRAS while I'm at it.

SAQ's Origin 2000/200 hardware aggregator was onto this idea, but it seems like my hinv was first.

Anyway, jpstewart is not far from the truth :D . It's fun to play with and I got to the wiki :D


Top
 Profile  
 
Unread postPosted: Fri Jun 29, 2012 4:22 pm 
Offline
User avatar

Joined: Sun Mar 18, 2007 2:25 pm
Posts: 1717
Location: Minneapolis, Minnesota USA
vishnu wrote:
What'cha gonna do with it? :mrgreen:
bjornl wrote:
What do you mean? There are dozens of household uses. Heating the garage, testing earprotection, weightlifting. Just to name a few... :)

Ha ha, yet more sgi hardware put to it's ultimate best use... :lol:

_________________
Project:
Simple as do, re, mi. a, b, c. one, two, three baby you and me
Plan:
World domination! Or something...


Top
 Profile  
 
Unread postPosted: Thu Jul 05, 2012 5:25 am 
Offline
User avatar

Joined: Wed Mar 05, 2008 12:28 pm
Posts: 131
Location: Paderborn, Germany
Nice :)
I will definitely try this if I ever get a Onyx 2 KCAR (this is what the IR "bricks" of the Onyx 2 were named
before they were actually bricks...?!).
I'm curious if it will work if the O200 has the older R10k PIMMs... I tried the Impact SE/SI setup and IRIX
complained about too old HUBs...

_________________
:A3502L: :O2000: :O200: = :O200: - :O200: :O200: :Octane: :Octane: :320: :O2: :Indigo2IMP: :Indy:
+ | d | i | g | i | t | a | l | +apple +[...] ;)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group