Nekochan Net

Official Chat Channel: #nekochan // irc.nekochan.net
It is currently Wed Apr 23, 2014 1:22 am

All times are UTC - 8 hours


Forum rules


Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.



Post new topic Reply to topic  [ 5 posts ] 
Author Message
Unread postPosted: Thu Jun 14, 2012 11:02 am 
Offline

Joined: Tue May 10, 2005 10:10 pm
Posts: 29
Location: Germany
With great thanks to 4130photo I present my precious :)
An Onyx2 Deskside with rackmount frontskin, FC-XIO with 8 36GB Stone-Drives attached (originally 16x but one IC on the second Stone-Array went the way of all living things :(), 36GB System Drive, 3x73GB Drives configured as xlv-stripe.
The DIVO is not mine, only borrowed from 4130photo.

hinv:
Code:
Location: /hw/module/1/slot/n2/node
            IP31 Board: barcode HTY102     part 030-1255-003 rev  B
     IP31PIMM8MB Board: barcode KHK666     part 030-1401-002 rev  C
Location: /hw/module/1/slot/n1/node
        MODULEID Board: barcode K0025789   part              rev   
            IP31 Board: barcode JEG084     part 030-1255-004 rev  A
     IP31PIMM8MB Board: barcode JDS946     part 030-1401-002 rev  B
      4P1G5_MPLN Board: barcode JRZ952     part 030-1066-002 rev  L
Location: /hw/module/1/slot/io4/kona
          GE14-4 Board: barcode GAJ247     part 030-1129-002 rev  G
Location: /hw/module/1/slot/io5/fibre_channel
   FIBRE_CHANNEL Board: barcode GTT357     part 030-0927-003 rev  C
Location: /hw/module/1/slot/io1/baseio
          BASEIO Board: barcode JJZ109     part 030-0734-002 rev  N
             MIO Board: barcode JJE728     part 030-0880-003 rev  G
Location: /hw/module/1/slot/io3/divo
            DIVO Board: barcode JRR377     part 030-1305-001 rev  E
4 300 MHZ IP27 Processors
CPU: MIPS R12000 Processor Chip Revision: 2.3
FPU: MIPS R12010 Floating Point Chip Revision: 2.3
CPU 0 at Module 1/Slot 2/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled)
  Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz  Tap 0xa
CPU 1 at Module 1/Slot 2/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled)
  Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz  Tap 0xa
CPU 2 at Module 1/Slot 1/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled)
  Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz  Tap 0xa
CPU 3 at Module 1/Slot 1/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled)
  Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz  Tap 0xa
Main memory size: 2880 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 8 Mbytes
Memory at Module 1/Slot 82: 1792 MB (enabled)
  Bank 0 contains 512 MB (Standard) DIMMS (enabled)
  Bank 1 contains 512 MB (Standard) DIMMS (enabled)
  Bank 2 contains 256 MB (Standard) DIMMS (enabled)
  Bank 3 contains 256 MB (Standard) DIMMS (enabled)
  Bank 4 contains 256 MB (Standard) DIMMS (enabled)
Memory at Module 1/Slot 81: 1088 MB (enabled)
  Bank 0 contains 512 MB (Standard) DIMMS (enabled)
  Bank 1 contains 512 MB (Standard) DIMMS (enabled)
  Bank 2 contains 64 MB (Standard) DIMMS (enabled)
Integral SCSI controller 4: Version Fibre Channel AIC-1160, revision 2
  Disk drive: unit 1 on SCSI controller 4 (unit 1)
  Disk drive: unit 2 on SCSI controller 4 (unit 2)
  Disk drive: unit 3 on SCSI controller 4 (unit 3)
  Disk drive: unit 4 on SCSI controller 4 (unit 4)
  Disk drive: unit 5 on SCSI controller 4 (unit 5)
  Disk drive: unit 6 on SCSI controller 4 (unit 6)
  Disk drive: unit 7 on SCSI controller 4 (unit 7)
  Disk drive: unit 8 on SCSI controller 4 (unit 8)
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
  Disk drive: unit 2 on SCSI controller 0 (unit 2)
  Disk drive: unit 3 on SCSI controller 0 (unit 3)
  Disk drive: unit 4 on SCSI controller 0 (unit 4)
  CDROM: unit 6 on SCSI controller 0
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
Integral SCSI controller 5: Version Fibre Channel AIC-1160, revision 2
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
IOC3 parallel port: plp1
Graphics board: InfiniteReality2
Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2
Iris Audio Processor: version RAD revision 7.0, number 1
Origin FIBRE CHANNEL board, module 1 slot 5: Revision 3
Origin BASEIO board, module 1 slot 1: Revision 4
  PCI Adapter ID (vendor 0x9004, device 0x1160) PCI slot 0
  PCI Adapter ID (vendor 0x9004, device 0x1160) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 6
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 7
  PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 0
  PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 2
DIVO Video: controller 1 unit 0: Input, Output
IOC3/IOC4 external interrupts: 1
HUB in Module 1/Slot 2: Revision 5 Speed 100.00 Mhz (enabled)
HUB in Module 1/Slot 1: Revision 5 Speed 100.00 Mhz (enabled)
IP27prom in Module 1/Slot n2: Revision 6.156
IP27prom in Module 1/Slot n1: Revision 6.156
IO6prom on Global Master Baseio in Module 1/Slot io2: Revision 6.156


gfxinfo:
Code:
Graphics board 0 is "KONAL" graphics.
   Managed (":0.0") 1600x1200
   Display has 8 channels
   4 GEs (of 4), occmask = 0x0f
   4MB external BEF ram, 32bit path
   2 RM7 boards (of 2) 1/1/0/0
   Texture Memory: 64MB/64MB/-/-
   Medium pixel depth
   32K cmap, 64K external gamma
   Channel 0:
    Origin = (0,0)
    Video Output: 1600 pixels, 1200 lines, 60.00Hz (1600x1200_60.vfo)
   Channel 1:
    Channel's Source Size: 720 pixels, 576 lines; Origin = (400,300)
    Video Output: 800 pixels, 600 lines, 60.00Hz (800x600_60.vfo)


Photos:
Attachment:
SAM_1212.JPG
SAM_1212.JPG [ 167.19 KiB | Viewed 526 times ]

Attachment:
SAM_1213.JPG
SAM_1213.JPG [ 156.78 KiB | Viewed 526 times ]

_________________
cu
gandtimo
:Onyx2: ikarus 4xR12k 300MHz, 2880Mb, 8x36Gb Stone


Top
 Profile  
 
Unread postPosted: Thu Jun 14, 2012 5:07 pm 
Offline
Moderator
Moderator
User avatar

Joined: Sun Jun 06, 2004 4:55 pm
Posts: 5161
Location: NC - USA
Congrats! - that's a very nice system

_________________
***********************************************************************
Welcome to ARMLand - 0/0x0d00
running...(sherwood-root 0607201829)
* InfiniteReality/Reality Software, IRIX 6.5 Release *
***********************************************************************


Top
 Profile  
 
Unread postPosted: Thu Jun 14, 2012 9:58 pm 
Offline
User avatar

Joined: Mon Aug 13, 2007 11:13 pm
Posts: 234
Location: Spain
Yes, very nice machine. I like a lot this rare rackmount Onyx.

_________________
Alberto
:Fuel: :Octane2: :1600SW: :O2: :O2: :1600SW:
http://www.f3b.es
http://unixverse.blogspot.com


Top
 Profile  
 
Unread postPosted: Thu Jun 14, 2012 11:43 pm 
Offline
User avatar

Joined: Tue Sep 21, 2004 11:05 am
Posts: 244
Location: Vevey, Switzerland
Have fun !

_________________
:Onyx2: 4xR12k 400, 8Gb, IR2E, 2x18+3x73GB HD (oxygen)
:A3504L: :A3504L: 16xItanium2 1.6, L2 9MB (neon)
:Fuel: R16k 800 V12, 2Gb, M-Audio, 36+147GB HD, 3Dconnexion SpaceMouse Classic (nitrogen)
:Octane2: Dual R14k 600 V6, 2Go, HD (173Go, 34Go) (carbon)
:Octane: R10k 400 MXE, 1280Mo (lithium) / 2xR10k 300 SSE,... (fluorine)
:O2: R10k 195, 512Mo (hydrogen) / R5k 180, 512Mo (sodium) / R5k 180->200 motherboard and PM only
:Indigo2IMP: R10k 195, HighImpact, 160Mo (helium) / R4400 125, Extreme, 160Mo (boron)
:O200: :O200: twin O200, 4xR12k 270, 2Go, HD (4x18Go) (beryllium)
:Indigo: R4k 100, 80Mo, LG1, 9GB HD, Python 25601 tape (magnesium])
:4D70G: 4D70GT... my very first one (now property of musée bolo and the foundation mémoires informatiques)
See the hinv/gfxinfo posts here.


Top
 Profile  
 
Unread postPosted: Sat Jun 16, 2012 9:36 am 
Offline

Joined: Tue May 10, 2005 10:10 pm
Posts: 29
Location: Germany
BetXen wrote:
Have fun !

Definitely :)
It's a lot of fun to see, how reactive and smooth you can work with a machine of that age :)

_________________
cu
gandtimo
:Onyx2: ikarus 4xR12k 300MHz, 2880Mb, 8x36Gb Stone


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group