Probably should have posted my Quad 500 Origin 300 when I got it up and running in late January, but I finally got another working Origin 300 today, swapped out the Dual 500 board with a Quad 600 and replaced the fans. Connected both via numalink (worked pretty flawlessly) and voila:
Code:
Location: /hw/module/001c01/node
IP45_4CPU Board: barcode MNS886 part 030-1797-001 rev -B
Location: /hw/module/001c01/Ibrick/xtalk/14
IO8 Board: barcode MJX813 part 030-1673-003 rev -F
Location: /hw/module/001c01/Ibrick/xtalk/15
IO8 Board: barcode MJX813 part 030-1673-003 rev -F
Location: /hw/module/001c02/node
IP45_4CPU Board: barcode MNM964 part 030-1797-001 rev -B
Location: /hw/module/001c02/Ibrick/xtalk/14
IO8 Board: barcode MHE546 part 030-1673-003 rev -E
Location: /hw/module/001c02/Ibrick/xtalk/15
IO8 Board: barcode MHE546 part 030-1673-003 rev -E
8 600 MHZ IP35 Processors
CPU: MIPS R14000 Processor Chip Revision: 2.4
FPU: MIPS R14010 Floating Point Chip Revision: 2.4
CPU 0 at Module 001c01/Slot 0/Slice A: 600 Mhz MIPS R14000 Processor Chip (enabled)
Processor revision: 2.4. Scache: Size 4 MB Speed 300 Mhz Tap 0x1a
CPU 1 at Module 001c01/Slot 0/Slice B: 600 Mhz MIPS R14000 Processor Chip (enabled)
Processor revision: 2.4. Scache: Size 4 MB Speed 300 Mhz Tap 0x1a
CPU 2 at Module 001c01/Slot 0/Slice C: 600 Mhz MIPS R14000 Processor Chip (enabled)
Processor revision: 2.4. Scache: Size 4 MB Speed 300 Mhz Tap 0x1a
CPU 3 at Module 001c01/Slot 0/Slice D: 600 Mhz MIPS R14000 Processor Chip (enabled)
Processor revision: 2.4. Scache: Size 4 MB Speed 300 Mhz Tap 0x1a
CPU 4 at Module 001c02/Slot 0/Slice A: 600 Mhz MIPS R14000 Processor Chip (enabled)
Processor revision: 2.4. Scache: Size 4 MB Speed 300 Mhz Tap 0xa
CPU 5 at Module 001c02/Slot 0/Slice B: 600 Mhz MIPS R14000 Processor Chip (enabled)
Processor revision: 2.4. Scache: Size 4 MB Speed 300 Mhz Tap 0xa
CPU 6 at Module 001c02/Slot 0/Slice C: 600 Mhz MIPS R14000 Processor Chip (enabled)
Processor revision: 2.4. Scache: Size 4 MB Speed 300 Mhz Tap 0xa
CPU 7 at Module 001c02/Slot 0/Slice D: 600 Mhz MIPS R14000 Processor Chip (enabled)
Processor revision: 2.4. Scache: Size 4 MB Speed 300 Mhz Tap 0xa
Main memory size: 8192 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Memory at Module 001c01/Slot 0: 4096 MB (enabled)
Bank 0 contains 1024 MB (Premium) DIMMS (enabled)
Bank 1 contains 1024 MB (Premium) DIMMS (enabled)
Bank 2 contains 1024 MB (Premium) DIMMS (enabled)
Bank 3 contains 1024 MB (Premium) DIMMS (enabled)
Memory at Module 001c02/Slot 0: 4096 MB (enabled)
Bank 0 contains 1024 MB (Premium) DIMMS (enabled)
Bank 1 contains 1024 MB (Premium) DIMMS (enabled)
Bank 2 contains 1024 MB (Premium) DIMMS (enabled)
Bank 3 contains 1024 MB (Premium) DIMMS (enabled)
Integral SCSI controller 8: Version Fibre Channel LS949X Port 0
Integral SCSI controller 9: Version Fibre Channel LS949X Port 1
Integral SCSI controller 10: Version QL12160, low voltage differential
Integral SCSI controller 11: Version QL12160, low voltage differential
Integral SCSI controller 0: Version QL12160, low voltage differential
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL12160, low voltage differential
Integral SCSI controller 12: Version QL12160, low voltage differential
Integral SCSI controller 13: Version QL12160, low voltage differential
IOC3/IOC4 serial port: tty5
IOC3/IOC4 serial port: tty6
IOC3/IOC4 serial port: tty7
IOC3/IOC4 serial port: tty8
Gigabit Ethernet: eg1, module 001c01, pci_bus 2, pci_slot 2, firmware version 0.0.0
Gigabit Ethernet: eg2, module 001c02, pci_bus 2, pci_slot 1, firmware version 0.0.0
Integral Fast Ethernet: ef0, version 1, module 001c01, pci 4
Fast Ethernet: ef1, version 1, module 001c02, pci 4
PCI Adapter ID (vendor 0x1000, device 0x0640) PCI slot 1
PCI Adapter ID (vendor 0x1000, device 0x0640) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0009) PCI slot 2
PCI Adapter ID (vendor 0x10a9, device 0x0009) PCI slot 1
PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 4
PCI Adapter ID (vendor 0x11c1, device 0x5802) PCI slot 5
PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 4
PCI Adapter ID (vendor 0x11c1, device 0x5802) PCI slot 5
IOC3/IOC4 external interrupts: 1
IOC3/IOC4 external interrupts: 2
HUB in Module 001c01/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
HUB in Module 001c02/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
IP35prom in Module 001c01/Slot n0: Revision 6.124
IP35prom in Module 001c02/Slot n0: Revision 6.210
USB controller: type OHCI
USB controller: type OHCI
More to come in about 2 weeks

_________________

33mhz R3k/48mb/XS24

150mhz R4400/256mb/XL24

600mhz R14kA/2gb/V10

8x1.4ghz Itanium 2/8GB

32x600mhz R14kA/24GB

4x700mhz R16k/8GB/V12/DCD/SAS/FC/DM5

2x700mhz R16k/4GB