New Tezro owner

New to SGIs? Need help getting things going? This is the forum for you!
Forum rules
Any posts concerning pirated software or offering to buy/sell/trade commercial software are subject to removal.
User avatar
marshallh
Posts: 5
Joined: Tue Nov 03, 2009 12:53 pm

New Tezro owner

Unread postby marshallh » Sat Oct 07, 2017 10:09 am

I picked up this Tezro from a recycler on eBay. May have overbid on it since there was no indication of its condition but I lucked out.

Turns out it does boot to Gfx Cfg Err fine as I am currently lacking enough PS/2 to USB adapters - I picked up a set of Sun type 6 stuff without realizing it.
Apart from some scuffing and UV damage ,the case is in good shape. Some of that can be fixed, and it needs a good cleaning.

DVD and drive caddies are all missing. Whoever decommissioned it (appears to be in 2016) taped the DVD drive rails inside so they can be re-used.


1. I need a couple drive caddies, are they the same as Origin 350?
2. Looking for a DVD drive as well, should I stick to the main 2 Toshiba units or will any SCSI unit work?
3. Need a 15k rpm HDD as well, size doesn't matter much, ideas?



Pics following:

Great packing, no shipping damage whatsoever

1.jpg


2.jpg


Missing all drive caddies

3.jpg


4.jpg


Not sure if this is a quad board, or all boards have this sticker. 6/8 slots populated, so 1.5, 3, or 6gb ram?

5.jpg
Last edited by marshallh on Sat Oct 14, 2017 2:29 pm, edited 1 time in total.

User avatar
Irinikus
Posts: 239
Joined: Wed Apr 27, 2016 4:25 am
Location: Cape Town, South Africa

Re: New Tezro owner

Unread postby Irinikus » Sat Oct 07, 2017 10:20 am

Nice one!

You can tell if it has two or four CPU’s by the number of heat sinks present underneath the metal shroud covering the CPU’s.

The board number should be found just below the top RAM Bank, under the top most VRM, if you google this number, you can find out what type of CPU’s the machine has.

Here’s where to find it:

C0DD7079-F7C7-44AD-817C-A0DEADC5EC94.jpeg
:Onyx2:Quad R14K 500MHz, IR3, DG5-8 :Tezro:Quad R16K 700MHz, 8MB, V12, DCD, DM3 :Octane2:Dual R14K 600MHz, PCI Card Cage, V12 :320:Dual 1GHz PIII
:O2:R12K 400MHz, DCD :Indigo:R4400SC 150MHz, ELAN :Indigo2:R4400SC 200MHz, Extreme :Indy:R4400SC 200MHz, XZ :Indy:R5000SC 150MHz, 24Bit XL.
SUN: JavaStation-10 (Krups), XVR-4000.
DEC: AlphaStation 255/300MHz.
Cray: Cray1: Memory Module, Cray2: Memory Module (complete stack of eight boards) and a power supply module, Cray3: ECL Module.
Apple: G3 Clamshell, G4 Sawtooth, G4 Quicksilver, G4 Mirror Doors, G5, Mac Pro 2013 (Trash can), 27 inch Cinema Display.
IBM: 486 DX-4 100MHz, 32Mb RAM, Creative Soundblaster 16-Bit, 1.44 Mb Disk drive, Creative 4X CD-ROM, 520Mb HDD.
Alienware: Aurora 7500.
Gaming Rig: Coolermaster Cosmos II, Coolermaster Ultimate 1100W Power supply, Asus Rampage III extreme, I7 980X, Corsair H100, 24Gb Corsair Dominator DDR3, EVGA GTX Titan X Super Clocked Edition, OCZ revodrive 3 x2 240gb, Velociraptor 600GB, Corsair 128GB SSD, Creative X-fi Fatality Pro.

User avatar
japes
Donor
Donor
Posts: 990
Joined: Thu Nov 08, 2007 4:35 pm
Location: Lynnwood, WA

Re: New Tezro owner

Unread postby japes » Sat Oct 07, 2017 1:03 pm

Drive trays were used by some Intel case and I believe some gateway server at least. So they're a bit easier to find on eBay and you don't have to pay SGI collector premium. Yes they're the same as the Origin/Altix 350.

Optical drive is standard PATA/ATAPI and I think any old DVD reader/CD-R or DVD burner will work. They're easy to find at recyclers near me.

For drives I usually use decommissioned HP 10k or 15k drives in the 36, 72, or 146 sizes. Mostly because I had a bunch after wiping them at an old job. Hard to go wrong with most of the 140ish and 300ish sized ones. Drives were pretty much a solved problem in the late days of scsi as sas was pushing them away. Thankfully sgi boots off any scsi drive the primary controller can talk to unlike IBM.

Once you have working PS/2 keyboard and mouse you'll have to report back. I suspect you can get a console now with a null modem on the console port. 38400 n81 is the settings. The console port is the l1 controller.

If the l1 controller needs a new clock chip, sorry they're out of production and distributors are empty. If the IO9 needs a new battery for the system time, no problems there. System time is kept with a ST micro snaphat and the replacement battery/crystal is still available.
:O3000: :Fuel: :Tezro: :Tezro: :Octane2: :Octane: :Octane: :Indigo: :Indigo: :Indigo: :Indigo: :O2: :1600SW: :O2: :1600SW: :1600SW: :Indigo2: :Indigo2: :Indigo2: :Indigo2: :Indigo2IMP: :Indy: :Indy: :Indy: :Indy: :O3x0: :O3x02L: :O3x02L:

User avatar
marshallh
Posts: 5
Joined: Tue Nov 03, 2009 12:53 pm

Re: New Tezro owner

Unread postby marshallh » Sat Oct 07, 2017 5:43 pm

Yup, with some old PS/2 accessories it came right up.

6.jpg


7.jpg


2x 800mhz, 4gb ram.

Thanks japes for that info. I have a 4x 700mhz node board on the way as well. I thought that a SCSI DVD drive was necessary, but if IDE drives work that'll make things much easier!
Last edited by marshallh on Sat Oct 14, 2017 2:29 pm, edited 1 time in total.

mopar5150
Posts: 548
Joined: Tue Apr 24, 2012 6:02 pm
Location: Palm Springs, CA
Contact:

Re: New Tezro owner

Unread postby mopar5150 » Mon Oct 09, 2017 12:26 pm

Nice purchase! I have the DVD drive, cable, caddies and bootable 15K hard drive to get you started. I am interested in your dual 800 IP board as well.

PM me your address for a shipping quote.

Thanks,
John
If the thing isn't on fire it's a software problem.

:Tezro: :O3x0: :A350:

User avatar
marshallh
Posts: 5
Joined: Tue Nov 03, 2009 12:53 pm

Re: New Tezro owner

Unread postby marshallh » Tue Oct 10, 2017 4:05 pm

Thanks John for the offer. Before you posted I made a big ebay purchase for a bunch of this stuff. Picked up a 146gb 15k and 300gb 10k.
The 4x700 is working fine in the Tezro, 8MB 350MHz L2 instead of 4MB 400mhz L2. Might want to offload the old nodeboard once things are running and I can do some comparisons to see which will work better, but I dont expect any surprises.


Bonus pic:

8.png
Last edited by marshallh on Sat Oct 14, 2017 2:30 pm, edited 1 time in total.

User avatar
japes
Donor
Donor
Posts: 990
Joined: Thu Nov 08, 2007 4:35 pm
Location: Lynnwood, WA

Re: New Tezro owner

Unread postby japes » Tue Oct 10, 2017 11:09 pm

That photo is great!

Mopar beat me to it, I was going to say the 2x800 is interesting, but I have a 2x600 in an Origin 350 that fills that interest (lower power for install and misc server).
:O3000: :Fuel: :Tezro: :Tezro: :Octane2: :Octane: :Octane: :Indigo: :Indigo: :Indigo: :Indigo: :O2: :1600SW: :O2: :1600SW: :1600SW: :Indigo2: :Indigo2: :Indigo2: :Indigo2: :Indigo2IMP: :Indy: :Indy: :Indy: :Indy: :O3x0: :O3x02L: :O3x02L:

User avatar
foetz
Moderator
Moderator
Posts: 6542
Joined: Mon Apr 14, 2003 4:34 am
Contact:

Re: New Tezro owner

Unread postby foetz » Wed Oct 11, 2017 12:26 pm

hi marshallh and congrats on the tezro!
please attach large pics or resize them if you link them in directly. they kill the layout :P

User avatar
Intuition
Posts: 161
Joined: Thu Oct 15, 2009 1:56 pm

Re: New Tezro owner

Unread postby Intuition » Wed Oct 11, 2017 4:57 pm

Oh, I'd love to have a tezro 4x cpu for running old Irix Maya or Softimage. 8) :shock:
Image O2 - R12K-300 Mhz, 36 GB HD, 384 MB-RAM
Image O2 - R12K-400 Mhz 279 GB HD, 256 MB-RAM :1600SW: 1600sw
:O200: Origin 200 ??? Specs soon
aka Casey Christopher


Return to “Getting Started, Documentation, Tips & Tricks”

Who is online

Users browsing this forum: No registered users and 1 guest