Nekochan Net

Added yesterday on bitsavers: scans of

007-0601-010_IRIS-4D_Programmers_Guide_Volume_II_v1.0_1987.pdf
007-0605-010_IRIS-4D_Users_Guide_v1.0_1987.pdf
007-0701-010_C_Language_Reference_Manual_v1.0_1987.pdf
007-0730-010_Assembly_Language_Programmers_Guide_v1.0_1987.pdf
007-0905-010_IRIS-4D_Series_Compiler_Guide_v1.0_1987.pdf
007-0906-030_dbx_Reference_Manual_v3.0_1990.pdf

in the pdf/sgi/iris4d/ directory. I don't provide direct links, please use a mirror close to your location whenever possible.

_________________
R4000 R4400 R4400 R8000 R10000 R4000PC R4000SC R5000SC R5000 RM7000 2xR10000 R12000 - 2x2xR10000 R16000
among more than 150 machines : Apollo, Be, Data General, Digital, HP, IBM, MIPS before SGI, Motorola, NeXT, SGI, Solbourne, Sun...

Cool! Did you scan them? I have around 20 of these brown binders in my library, and many of them contains multiple manuals ...

_________________
Now this is a deep dark secret, so everybody keep it quiet
It turns out that when reset, the WD33C93 defaults to a SCSI ID of 0, and it was simpler to leave it that way... -- Dave Olson, in comp.sys.sgi
Currently in commercial service: (2x)
In the museum: almost every MIPS/IRIX system.
Wanted: GM1 board for Professional Series GT graphics (030-0076-003, 030-0076-004)

Nope, I'm not associated with bitsavers in any way (besides being an happy supporter and having found gems in there).

_________________
R4000 R4400 R4400 R8000 R10000 R4000PC R4000SC R5000SC R5000 RM7000 2xR10000 R12000 - 2x2xR10000 R16000
among more than 150 machines : Apollo, Be, Data General, Digital, HP, IBM, MIPS before SGI, Motorola, NeXT, SGI, Solbourne, Sun...

As do I...

http://www.nekochan.net/gallery2/v/computer_room/album118/new/PB260092.JPG

_________________
-ks



See them all >here<

Well, all I have is a simple flat bed scanner, so I'm not in a hurry to start scanning them ...

_________________
Now this is a deep dark secret, so everybody keep it quiet
It turns out that when reset, the WD33C93 defaults to a SCSI ID of 0, and it was simpler to leave it that way... -- Dave Olson, in comp.sys.sgi
Currently in commercial service: (2x)
In the museum: almost every MIPS/IRIX system.
Wanted: GM1 board for Professional Series GT graphics (030-0076-003, 030-0076-004)

Nice find, thanks.



I guess you need one of them things:

http://www.youtube.com/watch?v=kvM-tjrS2-U

Looks like a good project after your garage/remodeling is over

_________________
[click for links to hinv] JP: [ :Fuel: :Octane2: :O2: :Indy: ] PL: [ :Fuel: ]
For Sale: 2*O200 M/B, 2*O200 PSU, 6*256MB O200 RAM, 2*O200 SCSI Backplane, 2*O200 MSC, DMediaPro DM-2 ( 030-1653-002 Rev. H , XT-DIGVID) with Octane XIO pull (Origin pull optionally available)

The old SGI manuals are not books but binders, so it's trivial to take the pages out. Some sort of scanner with mechanical sheet feeder should be good enough. Alas, I don't have one. Also, a large part of these old manuals is hardcopy manpages. Probably less work to simply recreate from the installation media.

_________________
Now this is a deep dark secret, so everybody keep it quiet
It turns out that when reset, the WD33C93 defaults to a SCSI ID of 0, and it was simpler to leave it that way... -- Dave Olson, in comp.sys.sgi
Currently in commercial service: (2x)
In the museum: almost every MIPS/IRIX system.
Wanted: GM1 board for Professional Series GT graphics (030-0076-003, 030-0076-004)